AGP aperture is 16MB @ 0x0
Hi,
I have a problem getting agpgart/drm to work on my TiBook, I have tracked the problem down to that suspect looking message.
agpgart: AGP aperture is 16MB @ 0x00
[drm] AGP 0.99 on Unkiwn @ 0x00000000 16MB
which results in the following messages in my XFree86 logs:
[agp] ring handle = 0x0000000
[agp] Could not map ring
Its an ATI Radeon 7500 Mobility M7 on an Apple UniNorth 1.5 chipset.
I think the correct aperture base is one of:
AGP special page: 0xdffff000aper_base: b8000000 MC_FB_LOC to: bbffb800, MC_AGP_LOC to: ffffc000
Signature · 3 lines
// Gianni Tedesco (gianni at scaramanga dot co dot uk) lynx --source www.scaramanga.co.uk/gianni-at-ecsc.asc | gpg --import 8646BE7D: 6D9F 2287 870E A2C9 8F60 3A3C 91B5 7669 8646 BE7D
Quoted 5 lines · Gianni Tedesco
Hi,
I have a problem getting agpgart/drm to work on my TiBook, I have tracked the problem down to that suspect looking message.
Quoted 7 lines
agpgart: AGP aperture is 16MB @
0x00
[drm] AGP 0.99 on Unkiwn @0x0000000016MBwhich results in the following messages in my XFree86 logs:
[agp] ring handle =
0x0000000
[agp] Could not map ring
Ok, things are a bit weird with UniNorth, AGP base beeing at 0 is actually correct. You probably need fixed DRM which can deal with UniNorth weirdies. Ask Michel Dänzer <[email protected]> for up to date patches against XFree DRI CVS
Quoted 6 lines
Its an ATI Radeon 7500 Mobility M7 on an Apple UniNorth 1.5 chipset.
I think the correct aperture base is one of:
AGP special page:
0xdffff000aper_base:b8000000MC_FB_LOCto:bbffb800,MC_AGP_LOCto:ffffc000
No. These are addresses in the card's address space, and things are setup differently than what is displayed by this debug code actually ;) What you see there is what I would like to program in the card, but I had to disable this for now as it's incompatible with current XFree radeon driver.
Signature · 1 line
Benjamin Herrenschmidt <[email protected]>