2.5.61 fix spelling of necessary in 11 files

diff -ur linux-2.5.61-1.1027-orig/arch/mips/ddb5xxx/common/nile4.c linux-2.5.61-1.1027/arch/mips/ddb5xxx/common/nile4.c
@@ -109,7 +109,7 @@
          * When programming a PDAR, the register should be read immediately
          * after writing it. This ensures that address decoders are properly
          * configured.
-	 * [jsun] is this really necesary?
+	 * [jsun] is this really necessary?
          */
         ddb_in32(pdar);
         ddb_in32(pdar + 4);

diff -ur linux-2.5.61-1.1027-orig/drivers/acorn/block/fd1772.c linux-2.5.61-1.1027/drivers/acorn/block/fd1772.c
@@ -336,7 +336,7 @@
  */
 static int Probing = 0;
 
-/* This flag is set when a dummy seek is necesary to make the WP
+/* This flag is set when a dummy seek is necessary to make the WP
  * status bit accessible.
  */
 static int NeedSeek = 0;

diff -ur linux-2.5.61-1.1027-orig/drivers/isdn/hisax/amd7930_fn.c linux-2.5.61-1.1027/drivers/isdn/hisax/amd7930_fn.c
@@ -176,7 +176,7 @@
 
         cs->dc.amd7930.old_state = cs->dc.amd7930.ph_state;
 
-        /* abort transmit if nessesary */
+        /* abort transmit if necessary */
         if ((message & 0xf0) && (cs->tx_skb)) {
                 wByteAMD(cs, 0x21, 0xC2);
                 wByteAMD(cs, 0x21, 0x02);

diff -ur linux-2.5.61-1.1027-orig/drivers/mtd/chips/jedec.c linux-2.5.61-1.1027/drivers/mtd/chips/jedec.c
@@ -754,7 +754,7 @@
 		       size_t *retlen, const u_char *buf)
 {
    /* Does IO to the currently selected chip. It takes the bank addressing
-      base (which is divisable by the chip size) adds the necesary lower bits
+      base (which is divisible by the chip size) adds the necessary lower bits
       of addrshift (interleve index) and then adds the control register index. */
    #define flread(x) map->read8(map,base+(off&((1<<chip->addrshift)-1))+((x)<<chip->addrshift))
    #define flwrite(v,x) map->write8(map,v,base+(off&((1<<chip->addrshift)-1))+((x)<<chip->addrshift))

diff -ur linux-2.5.61-1.1027-orig/drivers/usb/image/scanner.c linux-2.5.61-1.1027/drivers/usb/image/scanner.c
@@ -54,7 +54,7 @@
  *      allocation/registration for linux-2.3.22+.
  *    - Adopted David Brownell's <[email protected]> technique for 
  *      assigning bulk endpoints.
- *    - Removed unnessesary #include's
+ *    - Removed unnecessary #include's
  *    - Scanner model now reported via syslog INFO after being detected 
  *      *and* configured.
  *    - Added user specified vendor:product USB ID's which can be passed 

diff -ur linux-2.5.61-1.1027-orig/fs/befs/btree.c linux-2.5.61-1.1027/fs/befs/btree.c
@@ -56,9 +56,9 @@
 /* Note:
  * 
  * The book states 2 confusing things about befs b+trees. First, 
- * it states that the overflow feild of node headers is used by internal nodes 
- * to point to another node that "effectivly continues this one". Here is what 
- * I belive that means. Each key in internal nodes points to another node that
+ * it states that the overflow field of node headers is used by internal nodes
+ * to point to another node that "effectively continues this one". Here is what
+ * I believe that means. Each key in internal nodes points to another node that
  * contains key values less than itself. Inspection reveals that the last key 
  * in the internal node is not the last key in the index. Keys that are 
  * greater than the last key in the internal node go into the overflow node. 

@@ -124,7 +124,7 @@
  * @sup: Buffer in which to place the btree superblock
  *
  * Calls befs_read_datastream to read in the btree superblock and
- * makes sure it is in cpu byteorder, byteswapping if nessisary.
+ * makes sure it is in cpu byteorder, byteswapping if necessary.
  *
  * On success, returns BEFS_OK and *@sup contains the btree superblock,
  * in cpu byte order.

@@ -179,8 +179,8 @@
  * @node_off: Starting offset (in bytes) of the node in @ds
  *
  * Calls befs_read_datastream to read in the indicated btree node and
- * makes sure its header feilds are in cpu byteorder, byteswapping if 
- * nessisary.
+ * makes sure its header fields are in cpu byteorder, byteswapping if
+ * necessary.
  * Note: node->bh must be NULL when this function called first
  * time. Don't forget brelse(node->bh) after last call.
  *

diff -ur linux-2.5.61-1.1027-orig/fs/befs/datastream.c linux-2.5.61-1.1027/fs/befs/datastream.c
@@ -229,7 +229,7 @@
 	
 	Algorithm:
 	Linear search. Checks each element of array[] to see if it
-	contains the blockno-th filesystem block. This is nessisary
+	contains the blockno-th filesystem block. This is necessary
 	because the block runs map variable amounts of data. Simply
 	keeps a count of the number of blocks searched so far (sum),
 	incrementing this by the length of each block run as we come

diff -ur linux-2.5.61-1.1027-orig/net/ipv4/ip_gre.c linux-2.5.61-1.1027/net/ipv4/ip_gre.c
@@ -454,7 +454,7 @@
 			/* Impossible event. */
 			return;
 		case ICMP_FRAG_NEEDED:
-			/* And it is the only really necesary thing :-) */
+			/* And it is the only really necessary thing :-) */
 			rel_info = ntohs(skb->h.icmph->un.frag.mtu);
 			if (rel_info < grehlen+68)
 				return;

diff -ur linux-2.5.61-1.1027-orig/net/ipv4/ipip.c linux-2.5.61-1.1027/net/ipv4/ipip.c
@@ -383,7 +383,7 @@
 			/* Impossible event. */
 			return;
 		case ICMP_FRAG_NEEDED:
-			/* And it is the only really necesary thing :-) */
+			/* And it is the only really necessary thing :-) */
 			rel_info = ntohs(skb->h.icmph->un.frag.mtu);
 			if (rel_info < hlen+68)
 				return;

diff -ur linux-2.5.61-1.1027-orig/net/sched/sch_cbq.c linux-2.5.61-1.1027/net/sched/sch_cbq.c
@@ -797,7 +797,7 @@
 			   That is not all.
 			   To maintain the rate allocated to the class,
 			   we add to undertime virtual clock,
-			   necesary to complete transmitted packet.
+			   necessary to complete transmitted packet.
 			   (len/phys_bandwidth has been already passed
 			   to the moment of cbq_update)
 			 */

diff -ur linux-2.5.61-1.1027-orig/sound/pci/cs46xx/dsp_spos_scb_lib.c linux-2.5.61-1.1027/sound/pci/cs46xx/dsp_spos_scb_lib.c
@@ -1543,7 +1543,7 @@
 	/* dont touch anything if SPDIF is open */
 	if ( ins->spdif_status_out & DSP_SPDIF_STATUS_PLAYBACK_OPEN) {
 		/* when cs46xx_iec958_post_close(...) is called it
-		   will call this function if necesary depending on
+		   will call this function if necessary depending on
 		   this bit */
 		ins->spdif_status_out |= DSP_SPDIF_STATUS_OUTPUT_ENABLED;