2.5.62 various spelling fixes in 19 files.
Subsystems (17)
PATCH 1/1 2.5.62 various spelling fixes in 19 files.
This patch provides the following spelling fixes.
posible -> possible
messsage -> message
reqeuest -> request
exeption -> exception
seqeunce -> sequence
loggger -> logger
resposible -> responsible
qeueu -> queue
microsecnds -> microseconds
positiion -> position
feilds -> fields
Documentation/vm/hugetlbpage.txt | 2 +- arch/arm/mm/alignment.c | 2 +- arch/ia64/sn/io/l1.c | 2 +- arch/um/include/sysdep-i386/checksum.h | 2 +- drivers/acorn/block/fd1772.c | 2 +- drivers/acpi/namespace/nsxfobj.c | 2 +- drivers/char/genrtc.c | 2 +- drivers/isdn/eicon/divalog.h | 2 +- drivers/message/fusion/lsi/mpi_raid.h | 2 +- drivers/net/e1000/e1000_main.c | 2 +- drivers/net/sk98lin/skgeinit.c | 2 +- drivers/s390/block/dasd.c | 2 +- drivers/video/fm2fb.c | 2 +- drivers/video/q40fb.c | 2 +- fs/ntfs/mst.c | 2 +- net/ipv4/ipconfig.c | 2 +- net/sched/sch_atm.c | 2 +- net/sunrpc/svcauth.c | 2 +- sound/pci/via82xx.c | 2 +- 19 files changed, 19 insertions(+), 19 deletions(-)
Documentation/vm/hugetlbpage.txt +1 -1
@@ -66,7 +66,7 @@ /proc/sys/vm_nr_hugepages indicates the current number of configured hugetlb pages in the kernel. Super user privileges are required for modification of -this value. The allocation of hugetlb pages is posible only if there are +this value. The allocation of hugetlb pages is possible only if there are enough physically contiguous free pages in system OR if there are enough hugetlb pages free that can be transfered back to regular memory pool.
arch/arm/mm/alignment.c +1 -1
@@ -400,7 +400,7 @@* For alignment faults on the ARM922T/ARM920T the MMU makes * the FSR (and hence addr) equal to the updated base address * of the multiple access rather than the restored value. -* Switch this messsage off if we've got a ARM92[02], otherwise +* Switch this message off if we've got a ARM92[02], otherwise * [ls]dm alignment faults are noisy! */ #if !(definedCONFIG_CPU_ARM922T ) && !(definedCONFIG_CPU_ARM920T )
arch/ia64/sn/io/l1.c +1 -1
@@ -2734,7 +2734,7 @@* bigger. * * Be careful using the same buffer for both cmd and resp; it could get -* hairy if there were ever an L1 command reqeuest that spanned multiple +* hairy if there were ever an L1 command request that spanned multiple * packets. (On the other hand, that would require some additional * rewriting of the L1 command interface anyway.) */
arch/um/include/sysdep-i386/checksum.h +1 -1
@@ -60,7 +60,7 @@/* * These are the old (and unsafe) way of doing checksums, a warning message -* will be printed if they are used and an exeption occurs. +* will be printed if they are used and an exception occurs. * * these functions should go away after some time. */
drivers/acorn/block/fd1772.c +1 -1
@@ -99,7 +99,7 @@* Removed the busy wait loop in do_fd_request and replaced * by a routine on tq_immediate; only 11% cpu on a dd off the * raw disc - but the speed is the same. -* 1/ 9/96 - Idea (failed!) - set the 'disable spin-up seqeunce' +* 1/ 9/96 - Idea (failed!) - set the 'disable spin-up sequence' * when we read the track if we know the motor is on; didn't * help - perhaps we have to do it in stepping as well. * Nope. Still doesn't help.
drivers/acpi/namespace/nsxfobj.c +1 -1
@@ -140,7 +140,7 @@ *ret_handle =acpi_ns_convert_entry_to_handle (acpi_ns_get_parent_node (node)); -/* Return exeption if parent is null */ +/* Return exception if parent is null */ if (!acpi_ns_get_parent_node (node)) { status =AE_NULL_ENTRY ;
drivers/char/genrtc.c +1 -1
@@ -97,7 +97,7 @@static spinlock_t gen_rtc_lock =SPIN_LOCK_UNLOCKED ;/* -* Routine to poll RTC seconds field for change as often as posible, +* Routine to poll RTC seconds field for change as often as possible, * after first RTC_UIE use timer to reduce polling */ void genrtc_troutine (void *data)
drivers/isdn/eicon/divalog.h +1 -1
@@ -1,5 +1,5 @@/* -* Include file for defining the kernel loggger messages +* Include file for defining the kernel logger messages * These definitions are shared between the klog driver and the * klogd daemon process *
drivers/message/fusion/lsi/mpi_raid.h +1 -1
@@ -184,7 +184,7 @@/****************************************************************************/ -/* Mailbox reqeust structure */ +/* Mailbox request structure */ /****************************************************************************/ typedef struct _MSG_MAILBOX_REQUEST
drivers/net/e1000/e1000_main.c +1 -1
@@ -1150,7 +1150,7 @@* * The set_multi entry point is called whenever the multicast address * list or the network interface flags are updated. This routine is -* resposible for configuring the hardware for proper multicast, +* responsible for configuring the hardware for proper multicast, * promiscuous mode, and all-multi behavior. **/
drivers/net/sk98lin/skgeinit.c +1 -1
@@ -181,7 +181,7 @@* * Revision 1.21 1998/10/20 12:11:56 malthoff * Don't dendy the Queue config if the size of the unused -* rx qeueu is zero. +* rx queue is zero. * * Revision 1.20 1998/10/19 07:27:58 malthoff * SkGeInitRamIface() is public to be called by diagnostics.
drivers/s390/block/dasd.c +1 -1
@@ -555,7 +555,7 @@dasd_profile_end (dasd_device_t *device, dasd_ccw_req_t * cqr, struct request *req) { -long strtime, irqtime, endtime, tottime;/* in microsecnds */ +long strtime, irqtime, endtime, tottime;/* in microseconds */ long tottimeps, sectors;if (dasd_profile_level !=DASD_PROFILE_ON )
drivers/video/fm2fb.c +1 -1
@@ -267,7 +267,7 @@ fb_info.fix = fb_fix; fb_info.flags =FBINFO_FLAG_DEFAULT ; -/* The below feilds will go away !!!! */ +/* The below fields will go away !!!! */ fb_alloc_cmap (&fb_info.cmap,16 ,0 );if (register_framebuffer (&fb_info) <0 )
drivers/video/q40fb.c +1 -1
@@ -111,7 +111,7 @@ fb_info.pseudo_palette = pseudo_palette; fb_info.screen_base = (char *) q40fb_fix.smem_start; -/* The below feilds will go away !!!! */ +/* The below fields will go away !!!! */ fb_alloc_cmap (&fb_info.cmap,16 ,0 );master_outb (3 ,DISPLAY_CONTROL_REG );
fs/ntfs/mst.c +1 -1
@@ -114,7 +114,7 @@* mean that the structure is not subject to protection and hence doesn't need * to be fixed up. This means that you have to create a valid update sequence * array header in the ntfs record before calling this function, otherwise it -* will fail (the header needs to contain the position of the update seqeuence +* will fail (the header needs to contain the position of the update sequence * array together with the number of elements in the array). You also need to * initialise the update sequence number before calling this function * otherwise a random word will be used (whatever was in the record at that
net/ipv4/ipconfig.c +1 -1
@@ -603,7 +603,7 @@ *e++ =3 ;/* Default gateway request */ *e++ =4 ; e +=4 ; - *e++ =5 ;/* Name server reqeust */ + *e++ =5 ;/* Name server request */ *e++ =8 ; e +=8 ; *e++ =12 ;/* Host name request */
net/sched/sch_atm.c +1 -1
@@ -492,7 +492,7 @@ (void ) flow->q->ops->requeue (skb,flow->q);break ; } -D2PRINTK ("atm_tc_deqeueue: sending on class %p\n" ,flow); +D2PRINTK ("atm_tc_dequeue: sending on class %p\n" ,flow);/* remove any LL header somebody else has attached */ skb_pull (skb,(char *) skb->nh.iph-(char *) skb->data);if (skb_headroom (skb) < flow->hdr_len) {
net/sunrpc/svcauth.c +1 -1
@@ -52,7 +52,7 @@return aops->accept (rqstp, authp); } -/* A reqeust, which was authenticated, has now executed. +/* A request, which was authenticated, has now executed. * Time to finalise the the credentials and verifier * and release and resources */
sound/pci/via82xx.c +1 -1
@@ -683,7 +683,7 @@ } } } - viadev->lastpos = res;/* remember the last positiion */ + viadev->lastpos = res;/* remember the last position */ if (res >= viadev->bufsize) res -= viadev->bufsize;return res;