Spelling fixes for paticular -> particular and others in 18 files.
Subsystems (9)
PATCH 1/1 Spelling fixes for paticular -> particular and others in 18 files.
This patch provides the following spelling fixes:
paticular -> particular usefull -> useful occurance -> occurrence occurances -> occurrences
successfull -> successful
Documentation/DocBook/deviceiobook.tmpl | 2 +- Documentation/networking/sk98lin.txt | 2 +- Documentation/s390/s390dbf.txt | 2 +- arch/i386/kernel/dmi_scan.c | 2 +- arch/i386/pci/visws.c | 2 +- arch/m68knommu/kernel/ints.c | 2 +- drivers/net/3c501.c | 4 ++-- drivers/net/3c527.c | 2 +- drivers/net/sk98lin/skgepnmi.c | 10 +++++----- drivers/net/sungem.h | 2 +- drivers/net/tlan.c | 4 ++-- drivers/s390/block/dasd.c | 2 +- fs/befs/btree.c | 2 +- fs/cifs/cifs_unicode.h | 2 +- fs/eventpoll.c | 2 +- fs/jffs2/compr_rtime.c | 2 +- kernel/pm.c | 2 +- sound/core/seq/seq_timer.c | 2 +- 18 files changed, 24 insertions(+), 24 deletions(-)
Documentation/DocBook/deviceiobook.tmpl +1 -1
@@ -152,7 +152,7 @@ <para> While the basic functions are defined to be synchronous with respect to each other and ordered with respect to each other the busses the - devices sit on may themselves have asynchronocity. In paticular many + devices sit on may themselves have asynchronicity. In particular many authors are burned by the fact that PCI bus writes are posted asynchronously. A driver author must issue a read from the same device to ensure that writes have occurred in the specific cases the
Documentation/networking/sk98lin.txt +1 -1
@@ -187,7 +187,7 @@ this port is not "Sense". If autonegotiation is "On", all three values are possible. If it is "Off", only "Full" and "Half" are allowed. - It is usefull if your link partner does not support all + It is useful if your link partner does not support all possible combinations. - Flow Control
Documentation/s390/s390dbf.txt +1 -1
@@ -14,7 +14,7 @@ If the system still runs but only a subcomponent which uses dbf failes, it is possible to look at the debug logs on a live system via the Linux proc filesystem. -The debug feature may also very usefull for kernel and driver development. +The debug feature may also very useful for kernel and driver development. Design: -------
arch/i386/kernel/dmi_scan.c +1 -1
@@ -440,7 +440,7 @@ {printk (KERN_INFO " *** Possibly defective BIOS detected (irqtable)\n" );printk (KERN_INFO " *** Many BIOSes matching this signature have incorrect IRQ routing tables.\n" ); -printk (KERN_INFO " *** If you see IRQ problems, in paticular SCSI resets and hangs at boot\n" ); +printk (KERN_INFO " *** If you see IRQ problems, in particular SCSI resets and hangs at boot\n" );printk (KERN_INFO " *** contact your hardware vendor and ask about updates.\n" );printk (KERN_INFO " *** Building an SMP kernel may evade the bug some of the time.\n" );#ifdef CONFIG_X86_IO_APIC
arch/i386/pci/visws.c +1 -1
@@ -52,7 +52,7 @@ pin--; -/* Nothing usefull at PIIX4 pin 1 */ +/* Nothing useful at PIIX4 pin 1 */ if (bus == pci_bus0 && slot ==4 && pin ==0 )return -1 ;
arch/m68knommu/kernel/ints.c +1 -1
@@ -214,7 +214,7 @@/* * Do we need these probe functions on the m68k? * -* ... may be usefull with ISA devices +* ... may be useful with ISA devices */ unsigned long probe_irq_on (void ) {
drivers/net/3c501.c +2 -2
@@ -494,7 +494,7 @@* @regs: Register data (surplus to our requirements) * * Handle the ether interface interrupts. The 3c501 needs a lot more -* hand holding than most cards. In paticular we get a transmit interrupt +* hand holding than most cards. In particular we get a transmit interrupt * with a collision error because the board firmware isnt capable of rewinding * its own transmit buffer pointers. It can however count to 16 for us. *
@@ -684,7 +684,7 @@* @dev: Device to pull the packets from * * We have a good packet. Well, not really "good", just mostly not broken. -* We must check everything to see if it is good. In paticular we occasionally +* We must check everything to see if it is good. In particular we occasionally * get wild packet sizes from the card. If the packet seems sane we PIO it * off the card and queue it for the protocol layers. */
drivers/net/3c527.c +1 -1
@@ -227,7 +227,7 @@* Because MCA bus is a real bus and we can scan for cards we could do a * single scan for all boards here. Right now we use the passed in device * structure and scan for only one board. This needs fixing for modules -* in paticular. +* in particular. */ int __init mc32_probe (struct net_device *dev)
drivers/net/sk98lin/skgepnmi.c +5 -5
@@ -236,7 +236,7 @@* -Fixed bug for RX counters. On an RX overflow interrupt the high * words of all RX counters were incremented. * -SET operations on FLOWCTRL_MODE and LINK_MODE accept now the -* value 0, which has no effect. It is usefull for multiple instance +* value 0, which has no effect. It is useful for multiple instance * SETs. * * Revision 1.37 1998/11/20 08:02:04 mhaveman
@@ -1672,7 +1672,7 @@* Description: * Calls a general sub-function for all this stuff. The preset does * the same as a set, but returns just before finally setting the -* new value. This is usefull to check if a set might be successfull. +* new value. This is useful to check if a set might be successful. * If as instance a -1 is passed, an array of values is supposed and * all instance of the OID will be set. *
@@ -1716,7 +1716,7 @@* Description: * Calls a general sub-function for all this stuff. The preset does * the same as a set, but returns just before finally setting the -* new value. This is usefull to check if a set might be successfull. +* new value. This is useful to check if a set might be successful. * If as instance a -1 is passed, an array of values is supposed and * all instance of the OID will be set. *
@@ -1935,7 +1935,7 @@* Description: * Calls a general sub-function for all this set stuff. The preset does * the same as a set, but returns just before finally setting the -* new value. This is usefull to check if a set might be successfull. +* new value. This is useful to check if a set might be successful. * The sub-function runs through the IdTable, checks which OIDs are able * to set, and calls the handler function of the OID to perform the * preset. The return value of the function will also be stored in
@@ -6813,7 +6813,7 @@* * Description: * The COMMON module only tells us if the mode is half or full duplex. -* But in the decade of auto sensing it is usefull for the user to +* But in the decade of auto sensing it is useful for the user to * know if the mode was negotiated or forced. Therefore we have a * look to the mode, which was last used by the negotiation process. *
drivers/net/sungem.h +1 -1
@@ -562,7 +562,7 @@*/ /* Statistics Registers. All of these registers are 16-bits and -* track occurances of a specific event. GEM can be configured +* track occurrences of a specific event. GEM can be configured * to interrupt the host cpu when any of these counters overflow. * They should all be explicitly initialized to zero when the interface * is brought up.
drivers/net/tlan.c +2 -2
@@ -1630,7 +1630,7 @@* host_int The contents of the HOST_INT * port. * -* This driver is structured to determine EOC occurances by +* This driver is structured to determine EOC occurrences by * reading the CSTAT member of the list structure. Tx EOC * interrupts are disabled via the DIO INTDIS register. * However, TLAN chips before revision 3.0 didn't have this
@@ -1753,7 +1753,7 @@* host_int The contents of the HOST_INT * port. * -* This driver is structured to determine EOC occurances by +* This driver is structured to determine EOC occurrences by * reading the CSTAT member of the list structure. Rx EOC * interrupts are disabled via the DIO INTDIS register. * However, TLAN chips before revision 3.0 didn't have this
drivers/s390/block/dasd.c +1 -1
@@ -1582,7 +1582,7 @@/* * Cancels a request that was started with dasd_sleep_on_req. -* This is usefull to timeout requests. The request will be +* This is useful to timeout requests. The request will be * terminated if it is currently in i/o. * Returns 1 if the request has been terminated. */
fs/befs/btree.c +1 -1
@@ -41,7 +41,7 @@/* Befs B+tree structure: * * The first thing in the tree is the tree superblock. It tells you -* all kinds of usefull things about the tree, like where the rootnode +* all kinds of useful things about the tree, like where the rootnode * is located, and the size of the nodes (always 1024 with current version * of BeOS). *
fs/cifs/cifs_unicode.h +1 -1
@@ -99,7 +99,7 @@* UniStrchr: Find a character in a string * * Returns: -* Address of first occurance of character in string +* Address of first occurrence of character in string * or NULL if the character is not in the string */ static inline wchar_t *
fs/eventpoll.c +1 -1
@@ -97,7 +97,7 @@/* * Remove the item from the list and perform its initialization. -* This is usefull for us because we can test if the item is linked +* This is useful for us because we can test if the item is linked * using "EP_IS_LINKED(p)". */ #define EP_LIST_DEL (p) do { list_del(p); INIT_LIST_HEAD(p); } while (0)
fs/jffs2/compr_rtime.c +1 -1
@@ -13,7 +13,7 @@* Very simple lz77-ish encoder. * * Theory of operation: Both encoder and decoder have a list of "last -* occurances" for every possible source-value; after sending the +* occurrences" for every possible source-value; after sending the * first source-byte, the second byte indicated the "run" length of * matches *
kernel/pm.c +1 -1
@@ -145,7 +145,7 @@* and conflicting. * * WARNING: Calling pm_send directly is not generally recommended, in -* paticular there is no locking against the pm_dev going away. The +* particular there is no locking against the pm_dev going away. The * caller must maintain all needed locking or have 'inside knowledge' * on the safety. Also remember that this function is not locked against * pm_unregister. This means that you must handle SMP races on callback
sound/core/seq/seq_timer.c +1 -1
@@ -401,7 +401,7 @@return cur_time; } -/* TODO: use interpolation on tick queue (will only be usefull for very +/* TODO: use interpolation on tick queue (will only be useful for very high PPQ values) */ snd_seq_tick_time_t snd_seq_timer_get_cur_tick (seq_timer_t *tmr) {