Yocto apt sources.list for Raspberry Pi
Hi Everyone,
I am building the GNU Linux with Yocto for Raspberry Pi using meta-raspberrypi. Everything is good (with help of google search and yocto manual) until I added apt support to the image. As I am a little confused which Repository URL I should put in the sources.list, I tried the Raspbian repository. However, when I do apt-get upgrade I got following error which is not expected. Any idea on this effort?
BR,
Mike
root@raspberrypi-cm3:~# sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The following packages have been kept back: base-files cpp diffutils g++ gcc git initscripts libcap2 libgcc1 libgmp10 libsysfs2 libusb-1.0-0 libwbclient0 netcat ntp procps samba-common usbutils The following packages will be upgraded: busybox ethtool sysfsutils 3 upgraded, 0 newly installed, 0 to remove and 18 not upgraded. Need to get 562 kB of archives. After this operation, 1114 kB of additional disk space will be used. Do you want to continue? [Y/n] Get:1 http://archive.raspbian.org/raspbian wheezy/main armhf busybox armhf 1:1.20.0-7 [438 kB] Get:2 http://archive.raspbian.org/raspbian wheezy/main armhf ethtool armhf 1:3.4.2-1 [98.7 kB] Get:3 http://archive.raspbian.org/raspbian wheezy/main armhf sysfsutils armhf 2.1.0+repack-2 [24.5 kB] Fetched 562 kB in 5s (96.0 kB/s) (Reading database ... 16225 files and directories currently installed.) Preparing to unpack .../busybox_1%3a1.20.0-7_armhf.deb ... Unpacking busybox (1:1.20.0-7) over (1.24.1-r0) ... dpkg-deb (subprocess): unable to execute tar (tar): No such file or directory dpkg-deb: error: subprocess tar returned error exit status 2 dpkg: error processing archive /var/cache/apt/archives/ethtool_1%3a3.4.2-1_armhf.deb (--unpack): subprocess dpkg-deb --control returned error exit status 2 dpkg-deb (subprocess): unable to execute tar (tar): No such file or directory dpkg-deb: error: subprocess tar returned error exit status 2 dpkg: error processing archive /var/cache/apt/archives/sysfsutils_2.1.0+repack-2_armhf.deb (--unpack): subprocess dpkg-deb --control returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/ethtool_1%3a3.4.2-1_armhf.deb /var/cache/apt/archives/sysfsutils_2.1.0+repack-2_armhf.deb E: Sub-process /usr/bin/dpkg returned an error code (1)
Greetings.
If i understand you correctly you configured your Yocto/Poky OS to try to fetch updates from Raspbian OS.
You would need to configure Yocto/Poky to update from a Yocto/Poky repository. As with using Yocto you probably are defining your own, that would have to be your own repository URL. BR
Quoted 43 lines · Laigui Qin
Hi Everyone,
I am building the GNU Linux with Yocto for Raspberry Pi using meta-raspberrypi. Everything is good (with help of google search and yocto manual) until I added apt support to the image. As I am a little confused which Repository URL I should put in the sources.list, I tried the Raspbian repository. However, when I do apt-get upgrade I got following error which is not expected. Any idea on this effort?
BR,
Mikeroot@raspberrypi-cm3:~# sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The following packages have been kept back: base-files cpp diffutils g++ gcc git initscripts libcap2 libgcc1 libgmp10 libsysfs2 libusb-1.0-0 libwbclient0 netcat ntp procps samba-common usbutils The following packages will be upgraded: busybox ethtool sysfsutils 3 upgraded, 0 newly installed, 0 to remove and 18 not upgraded. Need to get 562 kB of archives. After this operation, 1114 kB of additional disk space will be used. Do you want to continue? [Y/n] Get:1http://archive.raspbian.org/raspbianwheezy/main armhf busybox armhf 1:1.20.0-7 [438 kB] Get:2http://archive.raspbian.org/raspbianwheezy/main armhf ethtool armhf 1:3.4.2-1 [98.7 kB] Get:3http://archive.raspbian.org/raspbianwheezy/main armhf sysfsutils armhf 2.1.0+repack-2 [24.5 kB] Fetched 562 kB in 5s (96.0 kB/s) (Reading database ... 16225 files and directories currently installed.) Preparing to unpack .../busybox_1%3a1.20.0-7_armhf.deb ... Unpacking busybox (1:1.20.0-7) over (1.24.1-r0) ... dpkg-deb (subprocess): unable to execute tar (tar): No such file or directory *dpkg-deb:**error:*subprocess tar returned error exit status 2 *dpkg:*error processing archive /var/cache/apt/archives/ethtool_1%3a3.4.2-1_armhf.deb (--unpack): subprocess dpkg-deb --control returned error exit status 2 dpkg-deb (subprocess): unable to execute tar (tar): No such file or directory *dpkg-deb:**error:*subprocess tar returned error exit status 2 *dpkg:*error processing archive /var/cache/apt/archives/sysfsutils_2.1.0+repack-2_armhf.deb (--unpack): subprocess dpkg-deb --control returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/ethtool_1%3a3.4.2-1_armhf.deb /var/cache/apt/archives/sysfsutils_2.1.0+repack-2_armhf.deb E: Sub-process /usr/bin/dpkg returned an error code (1)
Hello Johnny,
Thanks for the reply.
Yes, I know that's not a good idea now.
I would like to think there is a well maintained Yocto/Poky repository somewhere in the world like the debian/Raspbian deb source to leverage (build and maintain my own repo is not my purpose.) Looks like there is not such repo available... I do notice there is a Yocto subproject called "meta-debian", which try to leverage the debian repo. But not sure whether it works well without limitation...
BR,
Mike
At 2018-02-26 14:20:15, "Johnny R Cash" <[email protected]> wrote:
Greetings.
If i understand you correctly you configured your Yocto/Poky OS to try to fetch updates from Raspbian OS.
You would need to configure Yocto/Poky to update from a Yocto/Poky repository. As with using Yocto you probably are defining your own, that would have to be your own repository URL. BR
On 25.02.2018 14:38, Laigui Qin wrote:
Hi Everyone,
I am building the GNU Linux with Yocto for Raspberry Pi using meta-raspberrypi. Everything is good (with help of google search and yocto manual) until I added apt support to the image. As I am a little confused which Repository URL I should put in the sources.list, I tried the Raspbian repository. However, when I do apt-get upgrade I got following error which is not expected. Any idea on this effort?
BR,
Mike
root@raspberrypi-cm3:~# sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The following packages have been kept back: base-files cpp diffutils g++ gcc git initscripts libcap2 libgcc1 libgmp10 libsysfs2 libusb-1.0-0 libwbclient0 netcat ntp procps samba-common usbutils The following packages will be upgraded: busybox ethtool sysfsutils 3 upgraded, 0 newly installed, 0 to remove and 18 not upgraded. Need to get 562 kB of archives. After this operation, 1114 kB of additional disk space will be used. Do you want to continue? [Y/n] Get:1 http://archive.raspbian.org/raspbian wheezy/main armhf busybox armhf 1:1.20.0-7 [438 kB] Get:2 http://archive.raspbian.org/raspbian wheezy/main armhf ethtool armhf 1:3.4.2-1 [98.7 kB] Get:3 http://archive.raspbian.org/raspbian wheezy/main armhf sysfsutils armhf 2.1.0+repack-2 [24.5 kB] Fetched 562 kB in 5s (96.0 kB/s) (Reading database ... 16225 files and directories currently installed.) Preparing to unpack .../busybox_1%3a1.20.0-7_armhf.deb ... Unpacking busybox (1:1.20.0-7) over (1.24.1-r0) ... dpkg-deb (subprocess): unable to execute tar (tar): No such file or directory dpkg-deb: error: subprocess tar returned error exit status 2 dpkg: error processing archive /var/cache/apt/archives/ethtool_1%3a3.4.2-1_armhf.deb (--unpack): subprocess dpkg-deb --control returned error exit status 2 dpkg-deb (subprocess): unable to execute tar (tar): No such file or directory dpkg-deb: error: subprocess tar returned error exit status 2 dpkg: error processing archive /var/cache/apt/archives/sysfsutils_2.1.0+repack-2_armhf.deb (--unpack): subprocess dpkg-deb --control returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/ethtool_1%3a3.4.2-1_armhf.deb /var/cache/apt/archives/sysfsutils_2.1.0+repack-2_armhf.deb E: Sub-process /usr/bin/dpkg returned an error code (1)
Quoted 1 line · Laigui Qin
I would like to think there is a well maintained Yocto/Poky repository somewhere in the world like the debian/Raspbian deb source to leverage (build and maintain my own repo is not my purpose.) Looks like there is not such repo available...
Please consider that Yocto is not a distribution. It's a toolkit for creating distributions aimed at embedded use cases. While Poky is a reference distro created using Yocto components, it has a fairly limited set of supported hardware, which is mostly various QEMU emulator machines. Almost anyone else will have a different machine, different distribution features, and various other customizations. So any attempt to provide an 'offical' package feed from Yocto itself will just cause confusion and breakage, and will tie up the limited manpower we have even more.
Alex
Hi Alex,
Thanks for the explanation. It makes much more sense for the difference.
BR,
Mike
Quoted 18 lines · Alexander Kanavin
Quoted 4 lines · Laigui Qin
I would like to think there is a well maintained Yocto/Poky repository somewhere in the world like the debian/Raspbian deb source to leverage (build and maintain my own repo is not my purpose.) Looks like there is not such repo available...
Please consider that Yocto is not a distribution. It's a toolkit for creating distributions aimed at embedded use cases. While Poky is a reference distro created using Yocto components, it has a fairly limited set of supported hardware, which is mostly various QEMU emulator machines. Almost anyone else will have a different machine, different distribution features, and various other customizations. So any attempt to provide an 'offical' package feed from Yocto itself will just cause confusion and breakage, and will tie up the limited manpower we have even more.
Alex
Hello!
Quoted 1 line · Laigui Qin
I am building the GNU Linux with Yocto for Raspberry Pi using meta-raspberrypi. Everything is good (with help of google search and yocto manual) until I added apt support to the image. As I am a little confused which Repository URL I should put in the sources.list, I tried the Raspbian repository. However, when I do apt-get upgrade I got following error which is not expected. Any idea on this effort?
Unless you are planning to run your own repository server: none. There is certainly support for doing that, look for topic on "package feeds" in the Yocto documentation.
Your snippet below looks like you are trying to use the raspbian repositories, which certainly won't work. You have to understand that what you have built is *NOT* a replacement for a raspbian installation that will just fill in - it is a whole separated, custom distribution and in no way related to any package repository thats out there. So if you actually want to use those, then you have also to use their base distribution.
If you want to stick with Yocto, your two choices are:
- just include everything you need in the build. (thats the common one)
- run a custom package feed server (can be done, but probably you're better off with already existing solutions then.
Greetz Joe
Quoted 33 lines
root@raspberrypi-cm3:~# sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The following packages have been kept back: base-files cpp diffutils g++ gcc git initscripts libcap2 libgcc1 libgmp10 libsysfs2 libusb-1.0-0 libwbclient0 netcat ntp procps samba-common usbutils The following packages will be upgraded: busybox ethtool sysfsutils 3 upgraded, 0 newly installed, 0 to remove and 18 not upgraded. Need to get 562 kB of archives. After this operation, 1114 kB of additional disk space will be used. Do you want to continue? [Y/n] Get:1 http://archive.raspbian.org/raspbian wheezy/main armhf busybox armhf 1:1.20.0-7 [438 kB] Get:2 http://archive.raspbian.org/raspbian wheezy/main armhf ethtool armhf 1:3.4.2-1 [98.7 kB] Get:3 http://archive.raspbian.org/raspbian wheezy/main armhf sysfsutils armhf 2.1.0+repack-2 [24.5 kB] Fetched 562 kB in 5s (96.0 kB/s) (Reading database ... 16225 files and directories currently installed.) Preparing to unpack .../busybox_1%3a1.20.0-7_armhf.deb ... Unpacking busybox (1:1.20.0-7) over (1.24.1-r0) ... dpkg-deb (subprocess): unable to execute tar (tar): No such file or directory dpkg-deb: error: subprocess tar returned error exit status 2 dpkg: error processing archive /var/cache/apt/archives/ethtool_1%3a3.4.2-1_armhf.deb (--unpack): subprocess dpkg-deb --control returned error exit status 2 dpkg-deb (subprocess): unable to execute tar (tar): No such file or directory dpkg-deb: error: subprocess tar returned error exit status 2 dpkg: error processing archive /var/cache/apt/archives/sysfsutils_2.1.0+repack-2_armhf.deb (--unpack): subprocess dpkg-deb --control returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/ethtool_1%3a3.4.2-1_armhf.deb /var/cache/apt/archives/sysfsutils_2.1.0+repack-2_armhf.deb E: Sub-process /usr/bin/dpkg returned an error code (1)
Signature · 20 lines
——————————————— Josef Holzmayr Software Developer Embedded Systems Tel: +49 8444 9204-48 Fax: +49 8444 9204-50 R-S-I Elektrotechnik GmbH & Co. KG Woelkestrasse 11 D-85301 Schweitenkirchen www.rsi-elektrotechnik.de ——————————————— Amtsgericht Ingolstadt – GmbH: HRB 191328 – KG: HRA 170393 Geschäftsführer: Dr.-Ing. Michael Sorg, Dipl.-Ing. Franz Sorg Ust-IdNr: DE 128592548 _____________________________________________________________ Amtsgericht Ingolstadt - GmbH: HRB 191328 - KG: HRA 170363 Geschäftsführer: Dr.-Ing. Michael Sorg, Dipl.-Ing. Franz Sorg USt-IdNr.: DE 128592548
Hello Josef,
Thanks for the guide.
I think choice 1 is best solution for my situation based on the context.
BR,
Mike
Quoted 79 lines · Josef Holzmayr
Hello!
Quoted 1 line · Laigui Qin
I am building the GNU Linux with Yocto for Raspberry Pi using meta-raspberrypi. Everything is good (with help of google search and yocto manual) until I added apt support to the image. As I am a little confused which Repository URL I should put in the sources.list, I tried the Raspbian repository. However, when I do apt-get upgrade I got following error which is not expected. Any idea on this effort?
Unless you are planning to run your own repository server: none. There is certainly support for doing that, look for topic on "package feeds" in the Yocto documentation.
Your snippet below looks like you are trying to use the raspbian repositories, which certainly won't work. You have to understand that what you have built is *NOT* a replacement for a raspbian installation that will just fill in - it is a whole separated, custom distribution and in no way related to any package repository thats out there. So if you actually want to use those, then you have also to use their base distribution.
If you want to stick with Yocto, your two choices are:
- just include everything you need in the build. (thats the common one)
- run a custom package feed server (can be done, but probably you're better off with already existing solutions then.Greetz Joe
Quoted 33 lines
root@raspberrypi-cm3:~# sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The following packages have been kept back: base-files cpp diffutils g++ gcc git initscripts libcap2 libgcc1 libgmp10 libsysfs2 libusb-1.0-0 libwbclient0 netcat ntp procps samba-common usbutils The following packages will be upgraded: busybox ethtool sysfsutils 3 upgraded, 0 newly installed, 0 to remove and 18 not upgraded. Need to get 562 kB of archives. After this operation, 1114 kB of additional disk space will be used. Do you want to continue? [Y/n] Get:1 http://archive.raspbian.org/raspbian wheezy/main armhf busybox armhf 1:1.20.0-7 [438 kB] Get:2 http://archive.raspbian.org/raspbian wheezy/main armhf ethtool armhf 1:3.4.2-1 [98.7 kB] Get:3 http://archive.raspbian.org/raspbian wheezy/main armhf sysfsutils armhf 2.1.0+repack-2 [24.5 kB] Fetched 562 kB in 5s (96.0 kB/s) (Reading database ... 16225 files and directories currently installed.) Preparing to unpack .../busybox_1%3a1.20.0-7_armhf.deb ... Unpacking busybox (1:1.20.0-7) over (1.24.1-r0) ... dpkg-deb (subprocess): unable to execute tar (tar): No such file or directory dpkg-deb: error: subprocess tar returned error exit status 2 dpkg: error processing archive /var/cache/apt/archives/ethtool_1%3a3.4.2-1_armhf.deb (--unpack): subprocess dpkg-deb --control returned error exit status 2 dpkg-deb (subprocess): unable to execute tar (tar): No such file or directory dpkg-deb: error: subprocess tar returned error exit status 2 dpkg: error processing archive /var/cache/apt/archives/sysfsutils_2.1.0+repack-2_armhf.deb (--unpack): subprocess dpkg-deb --control returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/ethtool_1%3a3.4.2-1_armhf.deb /var/cache/apt/archives/sysfsutils_2.1.0+repack-2_armhf.deb E: Sub-process /usr/bin/dpkg returned an error code (1)Signature · 20 lines
——————————————— Josef Holzmayr Software Developer Embedded Systems Tel: +49 8444 9204-48 Fax: +49 8444 9204-50 R-S-I Elektrotechnik GmbH & Co. KG Woelkestrasse 11 D-85301 Schweitenkirchen www.rsi-elektrotechnik.de ——————————————— Amtsgericht Ingolstadt – GmbH: HRB 191328 – KG: HRA 170393 Geschäftsführer: Dr.-Ing. Michael Sorg, Dipl.-Ing. Franz Sorg Ust-IdNr: DE 128592548 _____________________________________________________________ Amtsgericht Ingolstadt - GmbH: HRB 191328 - KG: HRA 170363 Geschäftsführer: Dr.-Ing. Michael Sorg, Dipl.-Ing. Franz Sorg USt-IdNr.: DE 128592548
Running your own feed for personal use is trivial, just point lighttpd or any other HTTP server at the deploy/deb directory on your build machine. If you set PACKAGE_FEED_URLS in your local.conf to the URL of the server then future images will contain a pre-populated sources.list.
However the only relationship between your Yocto image and Rapsian is that they both use Linux and APT. You can't just re-use packages from Raspian (just like you wouldn't expect to re-use packages from Fedora), so if that's your goal then you should just use Raspian.
Ross
Quoted 64 lines · Laigui Qin
Hi Everyone,
I am building the GNU Linux with Yocto for Raspberry Pi using meta-raspberrypi. Everything is good (with help of google search and yocto manual) until I added apt support to the image. As I am a little confused which Repository URL I should put in the sources.list, I tried the Raspbian repository. However, when I do apt-get upgrade I got following error which is not expected. Any idea on this effort?
BR,
Mikeroot@raspberrypi-cm3:~# sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The following packages have been kept back: base-files cpp diffutils g++ gcc git initscripts libcap2 libgcc1 libgmp10 libsysfs2 libusb-1.0-0 libwbclient0 netcat ntp procps samba-common usbutils The following packages will be upgraded: busybox ethtool sysfsutils 3 upgraded, 0 newly installed, 0 to remove and 18 not upgraded. Need to get 562 kB of archives. After this operation, 1114 kB of additional disk space will be used. Do you want to continue? [Y/n] Get:1 http://archive.raspbian.org/raspbian wheezy/main armhf busybox armhf 1:1.20.0-7 [438 kB] Get:2 http://archive.raspbian.org/raspbian wheezy/main armhf ethtool armhf 1:3.4.2-1 [98.7 kB] Get:3 http://archive.raspbian.org/raspbian wheezy/main armhf sysfsutils armhf 2.1.0+repack-2 [24.5 kB] Fetched 562 kB in 5s (96.0 kB/s) (Reading database ... 16225 files and directories currently installed.) Preparing to unpack .../busybox_1%3a1.20.0-7_armhf.deb ... Unpacking busybox (1:1.20.0-7) over (1.24.1-r0) ... dpkg-deb (subprocess): unable to execute tar (tar): No such file or directory *dpkg-deb:* *error:* subprocess tar returned error exit status 2 *dpkg:* error processing archive /var/cache/apt/archives/ethtool_1%3a3.4.2-1_armhf.deb (--unpack): subprocess dpkg-deb --control returned error exit status 2 dpkg-deb (subprocess): unable to execute tar (tar): No such file or directory *dpkg-deb:* *error:* subprocess tar returned error exit status 2 *dpkg:* error processing archive /var/cache/apt/archives/ sysfsutils_2.1.0+repack-2_armhf.deb (--unpack): subprocess dpkg-deb --control returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/ethtool_1%3a3.4.2-1_armhf.deb /var/cache/apt/archives/sysfsutils_2.1.0+repack-2_armhf.deb E: Sub-process /usr/bin/dpkg returned an error code (1)--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Thanks Ross. got your point on Raspbian package difference. and PACKAGE_FEED_URLS attribute is useful for me. -Mike
At 2018-02-26 18:16:48, "Burton, Ross" <[email protected]> wrote:
Running your own feed for personal use is trivial, just point lighttpd or any other HTTP server at the deploy/deb directory on your build machine. If you set PACKAGE_FEED_URLS in your local.conf to the URL of the server then future images will contain a pre-populated sources.list.
However the only relationship between your Yocto image and Rapsian is that they both use Linux and APT. You can't just re-use packages from Raspian (just like you wouldn't expect to re-use packages from Fedora), so if that's your goal then you should just use Raspian.
Ross
On 25 February 2018 at 13:38, Laigui Qin <[email protected]> wrote:
Hi Everyone,
I am building the GNU Linux with Yocto for Raspberry Pi using meta-raspberrypi. Everything is good (with help of google search and yocto manual) until I added apt support to the image. As I am a little confused which Repository URL I should put in the sources.list, I tried the Raspbian repository. However, when I do apt-get upgrade I got following error which is not expected. Any idea on this effort?
BR,
Mike
root@raspberrypi-cm3:~# sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The following packages have been kept back: base-files cpp diffutils g++ gcc git initscripts libcap2 libgcc1 libgmp10 libsysfs2 libusb-1.0-0 libwbclient0 netcat ntp procps samba-common usbutils The following packages will be upgraded: busybox ethtool sysfsutils 3 upgraded, 0 newly installed, 0 to remove and 18 not upgraded. Need to get 562 kB of archives. After this operation, 1114 kB of additional disk space will be used. Do you want to continue? [Y/n] Get:1 http://archive.raspbian.org/raspbian wheezy/main armhf busybox armhf 1:1.20.0-7 [438 kB] Get:2 http://archive.raspbian.org/raspbian wheezy/main armhf ethtool armhf 1:3.4.2-1 [98.7 kB] Get:3 http://archive.raspbian.org/raspbian wheezy/main armhf sysfsutils armhf 2.1.0+repack-2 [24.5 kB] Fetched 562 kB in 5s (96.0 kB/s) (Reading database ... 16225 files and directories currently installed.) Preparing to unpack .../busybox_1%3a1.20.0-7_armhf.deb ... Unpacking busybox (1:1.20.0-7) over (1.24.1-r0) ... dpkg-deb (subprocess): unable to execute tar (tar): No such file or directory dpkg-deb: error: subprocess tar returned error exit status 2 dpkg: error processing archive /var/cache/apt/archives/ethtool_1%3a3.4.2-1_armhf.deb (--unpack): subprocess dpkg-deb --control returned error exit status 2 dpkg-deb (subprocess): unable to execute tar (tar): No such file or directory dpkg-deb: error: subprocess tar returned error exit status 2 dpkg: error processing archive /var/cache/apt/archives/sysfsutils_2.1.0+repack-2_armhf.deb (--unpack): subprocess dpkg-deb --control returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/ethtool_1%3a3.4.2-1_armhf.deb /var/cache/apt/archives/sysfsutils_2.1.0+repack-2_armhf.deb E: Sub-process /usr/bin/dpkg returned an error code (1)
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto