Skip to contentSkip to conversation

Linux 2.4.20, Athlon MP and Promise PDC20276 IDE controller

DISCUSSION Peter Nome 2 participants 2 messages Feb 25, 2003

lore
Share & tools
lore

Peter Nome

author
#0 lore raw

Hi Krishnakumar,

"Am I right in assuming that Linux doesn't enable DMA on this controller? How do I determine if DMA is enabled for a ide controller apart from relying on the boot message?"

As you suspect, you're getting DMA all right -- you see it in the boot message too, as UDMA(133). To confirm, issue

hdparm /dev/hde

Looks good!

Cheers,
Peter

#1 lore raw
Quoted 7 lines · Peter Nome

Hi Krishnakumar,

"Am I right in assuming that Linux doesn't enable DMA on this controller? How do I determine if DMA is enabled for a ide controller apart from relying on the boot message?"

Quoted 6 lines

As you suspect, you're getting DMA all right -- you see it in the boot message too, as UDMA(133). To confirm, issue

hdparm /dev/hde

Looks good!

Great ! It is good to hear. Do you know why my machine reboots every other time (only when booting up; I haven't seen it reboot, once up and running) when booting SMP kernels ? I tried using kernel-2.4.20 and it too exhibits the same behaviour.

Is there some setting in BIOS that I got wrong ? I am not into any overclocking business, as these are meant to be used by my prof and other folks, who care a lot about a stable system than anything else.

Will using mem=nopentium solve the problem and is it the right fix ? Will enabling/disabling ECC memory checking in the BIOS (the BIOS seems to do this when I select "Load Optimized Defaults") affect it ?

I seem to be a loss at narrowing down the problem to a single component as it seems to act according to it's own whims and fantasies. And the fact that things work with a UP kernel, makes me feel that it is not a hardware issue. Anyone else with the same hardware experience similar issues ?

Any help is appreciated.

Thanks,
kitty.