Skip to contentSkip to conversation

changes in behaviour of mtpav

DISCUSSION Allan Klinbail 2 participants 3 messages Mar 3, 2003 – Mar 5, 2003

lore
Share & tools
lore
#0 lore raw

Hi

I upgraded my CVS of alsa today and noticed some changes in the behaviou of the mtpav driver..

On first startup of the device, everything worked perfectly... on the second and susbsequent I observed no output from the device .. until I hit the panic button..

after hitting the panic button everything (output wise) seemed to work well.

I will do a full test of input and recording over the next couple of days.

cheers

Allan Klinbail

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#1 lore raw

At 03 Mar 2003 14:51:15 +1100,

Quoted 11 lines · Allan Klinbail

Hi

I upgraded my CVS of alsa today and noticed some changes in the behaviou of the mtpav driver..

On first startup of the device, everything worked perfectly... on the second and susbsequent I observed no output from the device .. until I hit the panic button..

strange, the driver has not been changed since you tested at last time...

Quoted 6 lines

after hitting the panic button everything (output wise) seemed to work well.

I will do a full test of input and recording over the next couple of days.

atm i'm overloaded, so the hack/fix for mtpav will be delayed. sorry. it will be likely after the 0.9.0-final is released.

Takashi

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#2 lore raw

Even stranger then .. when I did my last CVS update.. the mtpav driver was one that did update... that is why I rechecked behaviour.. however I did not use the panic button last time .. so maybe I am at fault

Quoted 21 lines · Takashi Iwai

At 03 Mar 2003 14:51:15 +1100,

Quoted 11 lines · Allan Klinbail

Hi

I upgraded my CVS of alsa today and noticed some changes in the behaviou of the mtpav driver..

On first startup of the device, everything worked perfectly... on the second and susbsequent I observed no output from the device .. until I hit the panic button..

strange, the driver has not been changed since you tested at last time...

Quoted 4 lines

after hitting the panic button everything (output wise) seemed to work well.

Quoted 8 lines
Quoted 2 lines

I will do a full test of input and recording over the next couple of days.

atm i'm overloaded, so the hack/fix for mtpav will be delayed. sorry. it will be likely after the 0.9.0-final is released.

Takashi

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf