Skip to contentSkip to conversation

Newbie with SiS 900 NIC driver, SuSE 8.1 and Fujitsu-Siemens Celvin EasyPC.

DISCUSSION Brian Durant 2 participants 2 messages Mar 15, 2003

lore
Share & tools
lore
#0 lore raw

Please personally CC the answers/comments posted to the list in response to my posting, as I am not a list member. I have tried getting the SiS 900 driver to run on SuSE 7.3, (and now) 8.1, Mandrake 8, 8.1, 9, Debian 3 rev.1 as well as running the latest Knoppix, none of which has been successful. Being a newbie and having only an interest in this one issue that I have never been able to resolve, I really don't belong on the list either. However, I believe that there is either a bug in the driver or my configuration is not supported. Either way, I would like to get the issue cleared up.

Anyway, to the issue at hand. There is a Fujitsu-Siemens Celvin EasyPC connected to my home WAN/LAN that I have been trying to get to work with the SiS 900 driver. The box has a SiS 900 NIC built into a Biostar motherboard and uses an Award BIOS. The WAN/LAN consists of 4 computers connected to a LinkSys router and a 3 Com cable modem. All other computers are able to connect to the Internet through auto DHCP, including one that is a dual boot Win2k Pro and SuSE 8.1 box. The Celvin is neither able to connect through auto DHCP or with a static IP address. I have checked the physical connection using a USB to Ethernet adapter and Knoppix, so I know the problem doesn't lie there. The SiS 900 NIC itself, works fine under Win 98 SE. This seems to me to rule out a number of things. Using SuSE 8.1, I have tried:

su
hwinfo --network_ctrl

Included in the info that came back was the following:

Revision: 0 x 01
Driver status: active
Config status: cfg=yes avail=yes need=no

I have found a couple of lines in /var/log/boot.msg that are of relevance as well. With auto DHCP, the message says "DHCP no IP address yet... backgrounding". When set to static IP, the boot.msg lists eth0 with the correct IP address and subnet mask and that is it.

I don't want to confuse the issue as I am using SuSE 8.1 at this time however, I think it is also worth noting that with Debian 3 rev. 1 installed, the output of # /sbin/ifconfig eth0 192.168.1.111 was:

eth0 Media Link Off.

The result of "$ ping 216.239.57.100" was:

Network is unreachable

I understand if you don't want to help me with my own personal configuration problems, but it would be nice to know if there is a bug in the driver or if my configuration is unsupported.

Cheers,

Brian Durant

#1 lore raw
Quoted 10 lines · Brian Durant

Please personally CC the answers/comments posted to the list in response to my posting, as I am not a list member. I have tried getting the SiS 900 driver to run on SuSE 7.3, (and now) 8.1, Mandrake 8, 8.1, 9, Debian 3 rev.1 as well as running the latest Knoppix, none of which has been successful. Being a newbie and having only an interest in this one issue that I have never been able to resolve, I really don't belong on the list either. However, I believe that there is either a bug in the driver or my configuration is not supported. Either way, I would like to get the issue cleared up.

Quoted 13 lines

Anyway, to the issue at hand. There is a Fujitsu-Siemens Celvin EasyPC connected to my home WAN/LAN that I have been trying to get to work with the SiS 900 driver. The box has a SiS 900 NIC built into a Biostar motherboard and uses an Award BIOS. The WAN/LAN consists of 4 computers connected to a LinkSys router and a 3 Com cable modem. All other computers are able to connect to the Internet through auto DHCP, including one that is a dual boot Win2k Pro and SuSE 8.1 box. The Celvin is neither able to connect through auto DHCP or with a static IP address. I have checked the physical connection using a USB to Ethernet adapter and Knoppix, so I know the problem doesn't lie there. The SiS 900 NIC itself, works fine under Win 98 SE. This seems to me to rule out a number of things. Using SuSE 8.1, I have tried:

This box I have at work is an Asus CUSI-M with sis900 NIC. Works just dandy.

There are no real caveats I know of, so maybe just include relevant info, like full dmesg, lspci, kernel version. output of ifconfig, etc.

Here is mine .. maybe you spot something. Also, might try a bios update
...

----------------- relevant dmesg ------------------------- sis900.c: v1.08.06 9/24/2002
PCI: Found IRQ 10 for device 00:01.1
PCI: Sharing IRQ 10 with 00:05.0
eth0: SiS 900 Internal MII PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 10, 00:e0:18:27:03:cc.
eth0: Media Link On 100mbps full-duplex
----------------------------------------------------------

----------------------------------------------------------
workshop module-init-tools-0.9.10 # lsmod | grep sis

sis                    47904   1 
sis900                 12236   1 

workshop module-init-tools-0.9.10 # lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 21) 00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 83)
00:01.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07) 00:01.3 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07) 00:02.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP 00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev
10)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] SiS630 GUI Accelerator+3D (rev 21)
workshop module-init-tools-0.9.10 # ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:E0:18:27:03:CC

          inet addr:10.0.4.50  Bcast:10.0.0.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:159732 errors:0 dropped:0 overruns:0 frame:0
          TX packets:137561 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:74381620 (70.9 Mb)  TX bytes:23243550 (22.1 Mb)
          Interrupt:10 Base address:0xd400 

workshop module-init-tools-0.9.10 # uname -a
Linux workshop 2.4.20-win4lin-r1 #2 Fri Feb 28 10:51:31 SAST 2003 i686 Celeron (Coppermine) GenuineIntel GNU/Linux
workshop module-init-tools-0.9.10 #
----------------------------------------------------------

Regards,

Signature · 1 line
Martin Schlemmer