Compiling options?
Ok, I currently manage a site with a couple hundred machines ranging from P2 through AMD-Durons. The prevaling theory was to make a single kernel compiled for a "pentium classic" and then load in drivers for about everything under the sun.
Is there anything good written up on if this is the best way for our 4 person admin team to keep managing this or should the boxes be custom tuned for specific groups of machines within reason? "What does it buy us" is one of the big questions as swapping out that many kernels and testing 5-8 different varriants is a big buyin on time.
Robert
:wq!
---------------------------------------------------------------------------
Robert L. Harris | PGP Key ID: E344DA3B
@ x-hkp://pgp.mit.edu
DISCLAIMER:
These are MY OPINIONS ALONE. I speak for no-one else.
Diagnosis: witzelsucht
IPv6 = [email protected] http://ipv6.rdlg.net
IPv4 = [email protected] http://www.rdlg.net
Quoted 5 lines · Robert L. Harris
Is there anything good written up on if this is the best way for our 4 person admin team to keep managing this or should the boxes be custom tuned for specific groups of machines within reason? "What does it buy us" is one of the big questions as swapping out that many kernels and testing 5-8 different varriants is a big buyin on time.
Depends largely on the workload. Compiling a kernel targetted at Athlon/Duron will factor in the 3dnow memory copying code which speeds up bulk copies quite a lot. If your workload doesn't involve that much memory copying, you'll likely not notice that much of a difference though.
Dave
Quoted 4 lines · Robert L. Harris
Ok, I currently manage a site with a couple hundred machines ranging from P2 through AMD-Durons. The prevaling theory was to make a single kernel compiled for a "pentium classic" and then load in drivers for about everything under the sun.
If your boxes range from PII through to AMD duron build for 686, but the basic theory is the same.
A 386 kernel really hurts later CPUs
A 486 kernel is generally fine
A 686 kernel speeds stuff up a little more
The only CPU that is really helped by a custom kernel is the rather rare IDT winchip which is 10-30% faster with the right kernels
Quoted 6 lines · Alan Cox
If your boxes range from PII through to AMD duron build for 686, but the basic theory is the same.
A 386 kernel really hurts later CPUs
A 486 kernel is generally fine
A 686 kernel speeds stuff up a little more
Should add that a 586 kernel is horrid on 686 and Athlon machines - the scheduling is worlds apart. Use it only on true 586 machines.
If you need a common denominator, go with 486 as Alan pointed out. In your case 686 seems safe and sane, though.
Robert Love