Skip to contentSkip to conversation

2.5 and modules ?

DISCUSSION Louis Garcia 3 participants 7 messages Mar 25, 2003 – Mar 30, 2003

lore
Share & tools
lore
#0 lore raw

I just installed 2.5.6x on my RH phoebe box and everything is working except modules. I recompiled the modutils package with module-init-tools according to rusty's old modutils package spec. I am able to compile 2.5 as modules without any depmod errors but when I boot 2.5 I can't load any.

--Lou

#1 lore raw
Quoted 4 lines

except modules. I recompiled the modutils package with module-init-tools according to rusty's old modutils package spec. I am able to compile 2.5 as modules without any depmod errors but when I boot 2.5 I can't load any.

What are the error messages?

#2 lore raw

I'm on a RH phoebe beta box. I think this is due to my rc.sysinit not being ready for 2.5 because I have built my nic driver as a module and it loaded fine. I am not able to load USB modules or ntfs and vfat modules. This is what I get at startup:

Setting hostname tiger: [ OK ]
Initializing USB controller (usb-uhci): FATAL: Module usb_uhci
not found. [ FAILED ]

Mounting USB filesystem:                             [  OK  ]
grep: /proc/bus/usb/drivers:  No such file or directory.
Initializing USB HID interface:                      [  OK  ]
Initializing USB Keyboard: FATAL: Module keybdev not found.

[ FAILED ]
Initializing USB Mouse: FATAL: Module mousedev not found.
[ FAILED ]

[ some more stuff thats ok ]

Mounting local filesystems: mount: fs type ntfs not supported by kernel. mount: fs type vfat not supported by kernel.
[ FAILED ]

I have built all required modules:

ls /lib/modules/2.4.66/kernel/drivers/usb/host
uhci-hcd.ko

ls /lib/modules/2.4.66/kernel/fs/fat
fat.ko

ls /lib/modules/2.4.66/kernel/fs/ntfs
ntfs.ko

Quoted 5 lines · Maciej Soltysiak
Quoted 4 lines

except modules. I recompiled the modutils package with module-init-tools according to rusty's old modutils package spec. I am able to compile 2.5 as modules without any depmod errors but when I boot 2.5 I can't load any.

What are the error messages?

#3 lore raw
Quoted 2 lines · Louis Garcia

Setting hostname tiger: [ OK ]
Initializing USB controller (usb-uhci): FATAL: Module usb_uhci

The USB UHCI module has been renamed. Now it's called uhci-hcd.ko. Make sure the following line is present in "/etc/modprobe.conf":

alias usb-controller uhci-hcd

Quoted 3 lines

not found. [ FAILED ]
Mounting USB filesystem: [ OK ]
grep: /proc/bus/usb/drivers: No such file or directory.

No more drivers in /proc/bus/usb.

Quoted 6 lines

Mounting local filesystems: mount: fs type ntfs not supported by kernel. mount: fs type vfat not supported by kernel.
[ FAILED ]

I have built all required modules:

"cat /proc/sys/kernel/modprobe" should spit:

/sbin/modprobe

Double check this... I found that rc.sysinit from RH8 and RH9 do configure this to /sbin/true, thus invalidating dynamic kernel module loading.

________________________________________________________________________
Felipe Alfaro Solana
Linux Registered User #287198
http://counter.li.org

#4 lore raw

Do you mean this? If so what do I change it to?

if [ -f /proc/sys/kernel/modprobe ]; then
if [ -n "$USEMODULES" ]; then
sysctl -w kernel.modprobe="/sbin/modprobe" >/dev/null 2>&1 sysctl -w kernel.hotplug="/sbin/hotplug" >/dev/null 2>&1
else
# We used to set this to NULL, but that causes 'failed to exec'
messages"

       sysctl -w kernel.modprobe="/bin/true" >/dev/null 2>&1
       sysctl -w kernel.hotplug="/bin/true" >/dev/null 2>&1

fi
fi

By the way, Thanks for all your help.

--Lou

Quoted 35 lines · Felipe Alfaro Solana
Quoted 2 lines · Louis Garcia

Setting hostname tiger: [ OK ]
Initializing USB controller (usb-uhci): FATAL: Module usb_uhci

The USB UHCI module has been renamed. Now it's called uhci-hcd.ko. Make sure the following line is present in "/etc/modprobe.conf":

alias usb-controller uhci-hcd

Quoted 3 lines

not found. [ FAILED ]
Mounting USB filesystem: [ OK ]
grep: /proc/bus/usb/drivers: No such file or directory.

No more drivers in /proc/bus/usb.

Quoted 6 lines

Mounting local filesystems: mount: fs type ntfs not supported by kernel. mount: fs type vfat not supported by kernel.
[ FAILED ]

I have built all required modules:

"cat /proc/sys/kernel/modprobe" should spit:

/sbin/modprobe

Double check this... I found that rc.sysinit from RH8 and RH9 do configure this to /sbin/true, thus invalidating dynamic kernel module loading.

________________________________________________________________________
Felipe Alfaro Solana
Linux Registered User #287198
http://counter.li.org

#5 lore raw
In reply to Felipe Alfaro Solana

One more question if you don't mind. These are the only errors I have left as boot. Are these not present in 2.5?

Setting hostname tiger:                              [  OK  ]
Initializing USB controller (usb-uhci):              [  OK  ]
Mounting USB filesystem:                             [  OK  ]
Initializing USB HID interface:                      [  OK  ]

Initializing USB Keyboard: FATAL: Module keybdev not found.
[ FAILED ]
Initializing USB Mouse: FATAL: Module mousedev not found.
[ FAILED ]

--Lou

Quoted 35 lines · Felipe Alfaro Solana
Quoted 2 lines · Louis Garcia

Setting hostname tiger: [ OK ]
Initializing USB controller (usb-uhci): FATAL: Module usb_uhci

The USB UHCI module has been renamed. Now it's called uhci-hcd.ko. Make sure the following line is present in "/etc/modprobe.conf":

alias usb-controller uhci-hcd

Quoted 3 lines

not found. [ FAILED ]
Mounting USB filesystem: [ OK ]
grep: /proc/bus/usb/drivers: No such file or directory.

No more drivers in /proc/bus/usb.

Quoted 6 lines

Mounting local filesystems: mount: fs type ntfs not supported by kernel. mount: fs type vfat not supported by kernel.
[ FAILED ]

I have built all required modules:

"cat /proc/sys/kernel/modprobe" should spit:

/sbin/modprobe

Double check this... I found that rc.sysinit from RH8 and RH9 do configure this to /sbin/true, thus invalidating dynamic kernel module loading.

________________________________________________________________________
Felipe Alfaro Solana
Linux Registered User #287198
http://counter.li.org

#6 lore raw
Quoted 4 lines · Louis Garcia

One more question if you don't mind. These are the only errors I have left as boot. Are these not present in 2.5?

Quoted 8 lines
Setting hostname tiger:                              [  OK  ]
Initializing USB controller (usb-uhci):              [  OK  ]
Mounting USB filesystem:                             [  OK  ]
Initializing USB HID interface:                      [  OK  ]

Initializing USB Keyboard: FATAL: Module keybdev not found.
[ FAILED ]
Initializing USB Mouse: FATAL: Module mousedev not found.
[ FAILED ]

Did you compile USB HID input drivers as modules? IIRC, the keybdev module is not named that way anymore in 2.5 kernels, so the "keybdev not found" error is normal.

I was getting those errors on 2.5, and they were normal for me as I did compile all the USB support built-in into the kernel, so there were no USB modules to load. I had to edit /etc/rc.sysinit and remove a bunch of stuff to get them away.

Felipe Alfaro Solana
Linux Registered User #287198
http://counter.li.org