Fehler bei cpufreq-info
cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009
Bitte melden Sie Fehler an [email protected].
analysiere CPU 0:
Treiber: p4-clockmod
Folgende CPUs laufen mit der gleichen Hardware-Taktfrequenz: 0
Die Taktfrequenz folgender CPUs werden per Software koordiniert: 0
Maximale Dauer eines Taktfrequenzwechsels: 10.00 ms.
Hardwarebedingte Grenzen der Taktfrequenz: 317 MHz - 2.53 GHz
mögliche Taktfrequenzen: 317 MHz, 633 MHz, 950 MHz, 1.27 GHz, 1.58 GHz, 1.90 GHz, 2.22 GHz, 2.53 GHz
mögliche Regler: userspace, powersave, conservative, ondemand, performance
momentane Taktik: die Frequenz soll innerhalb 317 MHz und 2.53 GHz.
liegen. Der Regler "performance" kann frei entscheiden,
welche Taktfrequenz innerhalb dieser Grenze verwendet wird.
momentane Taktfrequenz ist 2.53 GHz (verifiziert durch Nachfrage bei der Hardware).
Statistik:317 MHz:0,00%, 633 MHz:0,00%, 950 MHz:0,00%, 1.27 GHz:0,00%, 1.58 GHz:0,00%, 1.90 GHz:0,00%, 2.22 GHz:0,00%, 2.53 GHz:100,00%
Signature · 5 lines
Rainer Maier Fabriciusstr. 46 65933 Frankfurt T: +49 69 3904 7935 M: +49 176 3472 4262
2013/3/29 Rainer Maier <[email protected]>:
Quoted 11 lines
cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009 Bitte melden Sie Fehler an [email protected].
analysiere CPU 0:
Treiber: p4-clockmod
Folgende CPUs laufen mit der gleichen Hardware-Taktfrequenz: 0 Die Taktfrequenz folgender CPUs werden per Software koordiniert: 0 Maximale Dauer eines Taktfrequenzwechsels: 10.00 ms. Hardwarebedingte Grenzen der Taktfrequenz: 317 MHz - 2.53 GHz mögliche Taktfrequenzen: 317 MHz, 633 MHz, 950 MHz, 1.27 GHz, 1.58 GHz,
1.90 GHz, 2.22 GHz, 2.53 GHz
mögliche Regler: userspace, powersave, conservative, ondemand, performance
Quoted 8 lines
momentane Taktik: die Frequenz soll innerhalb 317 MHz und 2.53 GHz.
liegen. Der Regler "performance" kann frei entscheiden, welche Taktfrequenz innerhalb dieser Grenze verwendet
wird.
momentane Taktfrequenz ist 2.53 GHz (verifiziert durch Nachfrage bei der
Hardware).
Statistik:317 MHz:0,00%, 633 MHz:0,00%, 950 MHz:0,00%, 1.27 GHz:0,00%,
1.58 GHz:0,00%, 1.90 GHz:0,00%, 2.22 GHz:0,00%, 2.53 GHz:100,00%
What's the context of this mail? And why is it written in German?
Hi,
Quoted 1 line · Rainer Maier
cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009
cpufrequtils is outdated.
Please use cpupower which is the successor.
Quoted 3 lines
Bitte melden Sie Fehler an [email protected]. analysiere CPU 0:
Treiber: p4-clockmod
P4-clockmod is evil and does not save much/any power.
If you have trouble with it (lagging applications/performance), best blacklist p4-clockmod driver.
Thomas
Hi Thomas,
thanks for your info.
I removed cpufrequtils, but when I tried to install cpupower by aptitude it didn't know the package. I searched for it, but couldn't find one.
Would you perhaps know which packet to install ?
Thanks
Rainer
Am 02.04.2013 10:42, schrieb Thomas Renninger:
Quoted 16 lines
Hi,
Quoted 1 line · Rainer Maier
cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009
cpufrequtils is outdated.
Please use cpupower which is the successor.Quoted 3 lines
Bitte melden Sie Fehler an [email protected]. analysiere CPU 0:
Treiber: p4-clockmodP4-clockmod is evil and does not save much/any power.
If you have trouble with it (lagging applications/performance), best blacklist p4-clockmod driver.Thomas
Signature · 5 lines
Rainer Maier Fabriciusstr. 46 65933 Frankfurt T: +49 69 3904 7935 M: +49 176 3472 4262
Quoted 8 lines · Rainer Maier
Hi Thomas,
thanks for your info.
I removed cpufrequtils, but when I tried to install cpupower by aptitude it didn't know the package. I searched for it, but couldn't find one.
Would you perhaps know which packet to install ?Thanks
Rainer
The cpupower utilities are part of the kernel tree now and included in the kernel-tools package on Fedora. I suppose it will be something similar in your distribution.
Petr
Quoted 29 lines
Am 02.04.2013 10:42, schrieb Thomas Renninger:
Quoted 16 lines
Hi,
Quoted 1 line · Rainer Maier
cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009
cpufrequtils is outdated.
Please use cpupower which is the successor.Quoted 3 lines
Bitte melden Sie Fehler an [email protected]. analysiere CPU 0:
Treiber: p4-clockmodP4-clockmod is evil and does not save much/any power.
If you have trouble with it (lagging applications/performance), best blacklist p4-clockmod driver.Thomas
Signature · 9 lines
Rainer Maier Fabriciusstr. 46 65933 Frankfurt T: +49 69 3904 7935 M: +49 176 3472 4262 -- To unsubscribe from this list: send the line "unsubscribe cpufreq" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 7 lines · Petr Å abata
Quoted 6 lines · Rainer Maier
Hi Thomas,
thanks for your info.
I removed cpufrequtils, but when I tried to install cpupower by aptitude it didn't know the package. I searched for it, but couldn't find one. Would you perhaps know which packet to install ?
Quoted 6 lines
Quoted 2 lines
Thanks
RainerThe cpupower utilities are part of the kernel tree now and included in the kernel-tools package on Fedora. I suppose it will be something similar in your distribution.
Sigh.
I guess you have a separate perf package at least?
It would be great if cpupower gets packaged separately for two reasons:
1) cpuidle and cpufreq are used by a lot archs nowadays:
ppc, arm, afaik S390 at least they tried,...
I expect the kernel-tools package will only compile on X86?
2) To avoid confusion like above, so that this tool can easily be found by people searching for it.
Petr: Would you mind forward this to the maintainer. I once made sure cpupower compiles on ppc iirc, if someone runs into arch specific compile (or runtime) issues, please let me know, this should get fixed then.
Thanks,
Thomas
Rainer: Again, if you have any cpufreq related problems it's probably to p4-clockmod which is not a real cpufreq driver. The technique used should only be used to avoid critical cpu temperature and does not save you power, more the other way around (things should be processed quickly so that CPU sleep states can be entered which are most efficient). It even can be that p4-clockmode interferes with another interface doing the same (CPU throttling, T-states) then your system becomes even more laggy up to unusable.
Quoted 11 lines · Thomas Renninger
Quoted 10 lines · Petr Šabata
Quoted 8 lines · Rainer Maier
Hi Thomas,
thanks for your info.
I removed cpufrequtils, but when I tried to install cpupower by aptitude it didn't know the package. I searched for it, but couldn't find one. Would you perhaps know which packet to install ?Thanks
Rainer
Quoted 6 lines
Quoted 3 lines
The cpupower utilities are part of the kernel tree now and included in the kernel-tools package on Fedora. I suppose it will be something similar in your distribution.
Sigh.
I guess you have a separate perf package at least?
Yes, but technically it's a kernel subpackage.
Quoted 5 lines
It would be great if cpupower gets packaged separately for two reasons:
1) cpuidle and cpufreq are used by a lot archs nowadays:
ppc, arm, afaik S390 at least they tried,...
I expect the kernel-tools package will only compile on X86?
They used to be a separate package before the code moved to kernel. I see the package is build for ppc[64] but not on s390[x]. I have no information on arm[64] at the moment but if there are issues, I'll let you know :)
Quoted 2 lines
2) To avoid confusion like above, so that this tool can easily be found by people searching for it.
This is handled by package manager. Besides the list of of binaries the tools package should also act as a replacement for former cpufrequtils and cpupowerutils packages.
Quoted 4 lines
Petr: Would you mind forward this to the maintainer. I once made sure cpupower compiles on ppc iirc, if someone runs into arch specific compile (or runtime) issues, please let me know, this should get fixed then.
See above.
I'll forward this to kernel owners in Fedora.
Regards,
Petr
Quoted 13 lines · Petr Šabata
Quoted 12 lines · Thomas Renninger
Quoted 11 lines · Petr Šabata
Quoted 9 lines · Rainer Maier
Hi Thomas,
thanks for your info.
I removed cpufrequtils, but when I tried to install cpupower by aptitude
it didn't know the package. I searched for it, but couldn't find one. Would you perhaps know which packet to install ?Thanks
Rainer
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
The cpupower utilities are part of the kernel tree now and included in the kernel-tools package on Fedora. I suppose it will be something similar in your distribution.
Sigh.
I guess you have a separate perf package at least?Yes, but technically it's a kernel subpackage.
Sure, but I doubt it makes sense to put every tool in there. For bigger ones like perf, and IMO also cpupower it makes sense to package them separately.
Quoted 10 lines
Quoted 6 lines
It would be great if cpupower gets packaged separately for two reasons:
1) cpuidle and cpufreq are used by a lot archs nowadays:
ppc, arm, afaik S390 at least they tried,...
I expect the kernel-tools package will only compile on X86?They used to be a separate package before the code moved to kernel. I see the package is build for ppc[64] but not on s390[x].
Yep, I double checked: cpupower builds on ppc here too.
Quoted 10 lines
I have no information on arm[64] at the moment
but if there are issues, I'll let you know :)Quoted 3 lines
2) To avoid confusion like above, so that this tool can easily
be found by people searching for it.
This is handled by package manager. Besides the list of of binaries the tools package should also act as a replacement for former cpufrequtils and cpupowerutils packages.
It would really be great if this gets packaged separately. Find attached my .spec file.
If someone looks at this, he can freely take over whatever he wants.
...
Quoted 1 line
I'll forward this to kernel owners in Fedora.
Thanks,
Thomas
#
# spec file for package cpupower # # Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. # Author: Thomas Renninger <[email protected]> # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed # upon. The license for this file, and modifications and additions to the # file, is the same license as for the pristine package itself (unless the # license for the pristine package is not an Open Source License, in which # case the license is the MIT License). An "Open Source License" is a # license that conforms to the Open Source Definition (Version 1.9) # published by the Open Source Initiative.
# Please submit bugfixes or comments via http://bugs.opensuse.org/
#
Name: cpupower Url: http://www.kernel.org/pub/linux/utils/kernel/cpufreq/cpufrequtils.html # Use this as version when things are in mainline kernel %define version %(rpm -q --qf '%{VERSION}' kernel-source) Version: 3.8 Release: 0 Summary: Tools to determine and set CPU Power related Settings License: GPL-2.0 Group: System/Base Source: %{name}-%{version}.tar.bz2 Source1: cpupower_export_tarball_from_git.sh Patch1: cpupower-haswell_support.patch BuildRoot: %{_tmppath}/%{name}-%{version}-build BuildRequires: gettext-tools BuildRequires: pciutils BuildRequires: pciutils-devel Obsoletes: cpufrequtils < %version Provides: cpufrequtils = %version
%description
This tool is to make access to the Linux kernel's processor power subsystems like CPU frequency switching (cpufreq) or CPU sleep states (cpuidle) for users and userspace tools easier.
%package -n libcpupower0
Summary: Obsolete processor frequency related C-library Group: System/Base
%description -n libcpupower0
Contains libcpupower and soon possibly other CPU power related C libraries.
%package devel
Summary: Include files and C-libraries
Group: Development/Languages/C and C++
Requires: libcpupower0 = %{version}%description devel
Include files and C-libraries for C/C++ development
%package bench
Summary: CPU frequency micro benchmark Group: System/Benchmark Obsoletes: cpufrequtils-bench < %version Provides: cpufrequtils-bench = %version
%description bench
Helps to test the condition of a given kernel cpufreq
governor (e.g. ondemand, userspace, conservative) and the cpufreq HW driver (e.g. powernow-k8, acpi-cpufreq, ...).
For that purpose, it compares the performance governor to a configured powersave module.
%prep
%setup -q
%patch1 -p1
%build
# This package failed when testing with -Wl,-as-needed being default.
# So we disable it here, if you want to retest, just delete this comment and the line below.
export SUSE_ASNEEDED=0
CONF="PACKAGE_BUGREPORT=http://bugs.opensuse.org mandir=%_mandir libdir=%_libdir CPUFRQ_BENCH=true STRIP=true VERSION=%{version}" export CFLAGS="$RPM_OPT_FLAGS"
make $CONF %{?_smp_mflags}
%install
export SUSE_ASNEEDED=0
CONF="PACKAGE_BUGREPORT=http://bugs.opensuse.org mandir=%_mandir libdir=%_libdir CPUFRQ_BENCH=true DESTDIR=$RPM_BUILD_ROOT sbindir=/usr/sbin docdir=%{_docdir}/%{name} confdir=/etc VERSION=%{version}" make install DESTDIR=$RPM_BUILD_ROOT $CONF
# copy to examples doc dir to avoid complains from the build
# system about an executable in the doc dir.
mkdir -p $RPM_BUILD_ROOT/%{_docdir}/%{name}/examples
mv $RPM_BUILD_ROOT/%{_docdir}/%{name}/cpufreq-bench_script.sh $RPM_BUILD_ROOT/%{_docdir}/%{name}/examples
%find_lang %{name}%post -n libcpupower0 -p /sbin/ldconfig
%postun -n libcpupower0 -p /sbin/ldconfig
%files -f %{name}.lang
%defattr (-,root,root)
%{_mandir}/man1/cpupower*/usr/bin/cpupower
%files bench
%defattr (-,root,root)
%config /etc/cpufreq-bench.conf /usr/sbin/cpufreq-bench /usr/bin/cpufreq-bench_plot.sh
%dir %{_docdir}/%{name}
%dir %{_docdir}/%{name}/examples %{_docdir}/%{name}/examples/cpufreq-bench_script.sh %{_docdir}/%{name}/README-BENCH
%files -n libcpupower0
%defattr(-,root,root)
%{_libdir}/libcpupower*.so.*
%files devel
%defattr(-,root,root)/usr/include/cpufreq.h
%{_libdir}/libcpu*.so
%changelog