FBCON - vesa graphics modes no longer work on Toshiba Laptop

Toshiba Satellite 4300 laptop with the following display adapter:

S3 Inc. 86C270-294 Savage/IX-MV (rev 11)

2.4.20 kernel works well with vga=0x305 and uses the entire LCD panel.

2.5.67 kernel with vga=0x305 sets a graphic mode that only uses the inner 640x480 set of pixels and the display is just a jumbled mess.

I did try the latest fb patch and the problem remains. Also found a note that said to try "video=vesa:ywrap,pmipal,mtrr" and this didn't work either.

Regards,
Sean

#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_PEARL_8x8=y
CONFIG_FONT_ACORN_8x8=y
CONFIG_FONT_MINI_4x6=y
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

Why don't you add vga=791 video=vesa:1024x768 to the kernel boot line and enjoy. And next time maybe you should try to figure it out for yourself just a little bit longer before asking the list.

Regards,
Sean.

Try disabling CONFIG_VGA_CONSOLE. Tell me if this fixes all your problems.