HDSP 96/52
Quoted 2 lines · Mark Knecht
I'm getting a lot of reasonable or even good results, but no actual audio unfortunately.
Me too. The driver loads fine. hdspconf works great. My A/D converter is happy. i tried running the following script to set all the mixer levels to unity.
for dest in $(seq 0 26);do
for i in $(seq 0 51);do
amixer cset numid=5 $i,$dest 32768 > /dev/null;
done
done
However, i've never gotten any audio through the card. Only silence. If there is any patch available then i'm happy to test it.
Signature · 8 lines
Victory to the Divine Mother!! after all, http://sahajayoga.org http://why-compete.org ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf
Quoted 8 lines · Joshua N Pritikin
Quoted 2 lines · Mark Knecht
I'm getting a lot of reasonable or even good results, but no actual audio unfortunately.
Me too. The driver loads fine. hdspconf works great. My A/D converter is happy. i tried running the following script to set all the mixer levels to unity.
Quoted 8 lines
for dest in $(seq 0 26);do
for i in $(seq 0 51);doamixer cset numid=5 $i,$dest 32768 > /dev/null;done
doneHowever, i've never gotten any audio through the card. Only silence. If there is any patch available then i'm happy to test it.
Joshua,
No, there is no patch or fix for this yet that I know of. Paul Davis
did write early in the week (4/22) he was going to work on it that day or the next, but I haven't heard of anything posted yet.
As a check, does you card identify itself this way:
[root@localhost root]# lspci
<SNIP>
00:0e.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall DSP (rev 68)
I'm most interested in what revision you have? 68?
Anyway, I share your frustrations, but I've pretty much given up.
It's been months now since I've had any Alsa working. Linux is now just an email environment for me. So much for taking advice on which card to buy!! ;-)
Cheers,
Mark
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
Quoted 6 lines · Mark Knecht
As a check, does you card identify itself this way:
[root@localhost root]# lspci
<SNIP>
00:0e.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall DSP (rev 68)
Yah:
00:0c.0 Multimedia audio controller: Xilinx, Inc.: Unknown device 3fc5 (rev 68)
Quoted 1 line
I'm most interested in what revision you have? 68?
Yah, hex 0x68.
Quoted 4 lines
Anyway, I share your frustrations, but I've pretty much given up.
It's been months now since I've had any Alsa working. Linux is now just an email environment for me. So much for taking advice on which card to buy!! ;-)
Have you complained to RME recently? Maybe they aren't giving the Linux people the needed support. i'll send an email in that direction today.
Signature · 8 lines
Victory to the Divine Mother!! after all, http://sahajayoga.org http://why-compete.org ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf
I have a HDSP with multiface on my laptop. I know this is not exactly the same but I think the drivers share alot of code. I have experience problems with the matrix mixer. It does not seam to be stable, after rebooting it works sometime and sometimes not. I have not been able to figure out any pattern in the behavior yet.
--PLu
Quoted 12 lines · Joshua N Pritikin
Quoted 4 lines · Mark Knecht
I'm getting a lot of reasonable or even good results, but no actual audio unfortunately.
Me too. The driver loads fine. hdspconf works great. My A/D converter is happy. i tried running the following script to set all the mixer levels to unity.
Quoted 11 lines
for dest in $(seq 0 26);do
for i in $(seq 0 51);do
amixer cset numid=5 $i,$dest 32768 >/dev/null;
done
doneHowever, i've never gotten any audio through the card. Only silence. If there is any patch available then i'm happy to test it.
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
Quoted 7 lines · Peter Lundén
I have a HDSP with multiface on my laptop. I know this is not exactly the same but I think the drivers share alot of code. I have experience problems with the matrix mixer. It does not seam to be stable, after rebooting it works sometime and sometimes not. I have not been able to figure out any pattern in the behavior yet.
--PLu
Hi Peter,
In an email from Paul Davis 1-2 weeks ago, he made a statement that
the 9652 (The Hammerfall) and the HDSP 9652 do not share much code at all. I Am unclear whether the HDSP Digi/Multi products and the HDSP 9652 with everything on the card share much. Certainly it would be easier to maintain the drivers if they did.
Thanks,
Mark
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf