Skip to contentSkip to conversation

Audigy2 Status/Help

DISCUSSION [email protected] 2 participants 2 messages May 19, 2003 – May 20, 2003

lore
Share & tools
lore
#0 lore raw

I have an Audigy2 Platinum eX. I have been trying to get the alsa card to recognize it. I have been compiling the 2.5 kernel and 2.4 kernel tons of times to see if anything would work. I still can not get it to work. I can get the emu10k1-cvs drivers to work right away. I really need ALSA because I'm going to be doing a lot of audio editing with jack applications.

I would like to know if there is ANY Audigy2 support in the drivers? I go through the source code and there were references to "Audigy2". Has anyone got this working and with what version (reg., plat, plat. ex)?

I use 2.4.20-ac2 kernel. (although I have tried 2.5.69 and 2.4.20vanilla). I think what I have kind of noticed is that it all comes back to the ac97 stuff. I have been using the latest alsa-driver-0.9.3a(and b) as well as tried the alsa-drive-0.9.2. The kernel has compiled in sound and no oss. (I have tried sound as a module as well). It seems like other people get it working but maybe that's because they have just a regular audigy2 and not the eX.

When I "modprobe snd-emu10k1" I get the following:

/lib/modules/2.4.20/kernel/sound/pci/emu10k1/snd-emu10k1.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg /lib/modules/2.4.20/kernel/sound/pci/emu10k1/snd-emu10k1.o: insmod /lib/modules/2.4.20/kernel/sound/pci/emu10k1/snd-emu10k1.o failed /lib/modules/2.4.20/kernel/sound/pci/emu10k1/snd-emu10k1.o: insmod snd-emu10k1 failed

This is from /var/log/everything/current (dmesg):

[kernel] EMU10K1/Audigy soundcard not found or device busy
[kernel] ALSA ../../alsa-kernel/pci/ac97/ac97_codec.c:2046: AC'97 0:0 does not respond - RESET [kernel] EMU10K1/Audigy soundcard not found or device busy
[kernel] devfs_mk_dir(snd): using old entry in dir: c1c175c0 ""
[kernel] devfs_register(snd/controlC0): could not append to parent, err: -17 [kernel] devfs_register(snd/timer): could not append to parent, err: -17 [kernel] ALSA ../../alsa-kernel/pci/ac97/ac97_codec.c:2046: AC'97 0:0 does not respond - RESET [kernel] EMU10K1/Audigy soundcard not found or device busy

David
[email protected]

-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software. http://www.objectstore.net/sourceforge

#1 lore raw

According to this thread...

http://www.mail-archive.com/[email protected]/msg06264.html

...Audigy2 Platinum (not EX) is partially supported. I've got a message recently from the person who initiated that thread saying that, in a later version, ALSA also started to support the line-1 out that didn't work before.

According to same source, MIDI input is still broken.

I have no idea if EX is supported at all.

Quoted 39 lines · On Mon, 2003-05-19 at 13:00, [email protected] wrote:

I have an Audigy2 Platinum eX. I have been trying to get the alsa card to recognize it. I have been compiling the 2.5 kernel and 2.4 kernel tons of times to see if anything would work. I still can not get it to work. I can get the emu10k1-cvs drivers to work right away. I really need ALSA because I'm going to be doing a lot of audio editing with jack applications.

I would like to know if there is ANY Audigy2 support in the drivers? I go through the source code and there were references to "Audigy2". Has anyone got this working and with what version (reg., plat, plat. ex)?

I use 2.4.20-ac2 kernel. (although I have tried 2.5.69 and 2.4.20vanilla). I think what I have kind of noticed is that it all comes back to the ac97 stuff. I have been using the latest alsa-driver-0.9.3a(and b) as well as tried the alsa-drive-0.9.2. The kernel has compiled in sound and no oss. (I have tried sound as a module as well). It seems like other people get it working but maybe that's because they have just a regular audigy2 and not the eX.

When I "modprobe snd-emu10k1" I get the following:

/lib/modules/2.4.20/kernel/sound/pci/emu10k1/snd-emu10k1.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg /lib/modules/2.4.20/kernel/sound/pci/emu10k1/snd-emu10k1.o: insmod /lib/modules/2.4.20/kernel/sound/pci/emu10k1/snd-emu10k1.o failed /lib/modules/2.4.20/kernel/sound/pci/emu10k1/snd-emu10k1.o: insmod snd-emu10k1 failed

This is from /var/log/everything/current (dmesg):

[kernel] EMU10K1/Audigy soundcard not found or device busy
[kernel] ALSA ../../alsa-kernel/pci/ac97/ac97_codec.c:2046: AC'97 0:0 does not respond - RESET [kernel] EMU10K1/Audigy soundcard not found or device busy
[kernel] devfs_mk_dir(snd): using old entry in dir: c1c175c0 ""
[kernel] devfs_register(snd/controlC0): could not append to parent, err: -17 [kernel] devfs_register(snd/timer): could not append to parent, err: -17 [kernel] ALSA ../../alsa-kernel/pci/ac97/ac97_codec.c:2046: AC'97 0:0 does not respond - RESET [kernel] EMU10K1/Audigy soundcard not found or device busy

David
[email protected]

-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software. http://www.objectstore.net/sourceforge
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

Signature · 11 lines
Florin Andrei

http://florin.myip.org/



-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a
relational database is painful, don't do it! Check out ObjectStore.
Now part of Progress Software. http://www.objectstore.net/sourceforge