dmix plugin problems -- Resend
I'm sending this again since I got no response the first time and dmix does not appear to be under heavy development, despite how incredibly useful it would be if it worked.
[n8gray@golux alsa-lib-0.9.3]$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 0.9.3a. Compiled on May 9 2003 for kernel 2.4.21-0.16mm-mdkcustom. Using alsa-libs 0.9.3.
The dmix plugin seems to be very unreliable, or else maybe I'm not setting it up correctly. Here's my asoundrc:
=================== .asoundrc =================== pcm.intel8x0 {
type hw
card 0
}
ctl.intel8x0 {
type hw
card 0
}
pcm.mydmix {
type dmix
ipc_key 12349
ipc_key_add_uid true
slave {
pcm "hw:0,0"
# Setting this rate to 44100 seems to help
rate 44100
}
}ctl.mydmix {
type hw
card 0
}
pcm.mixed {
type plug
slave {
pcm mydmix
}
}ctl.mixed {
type hw
card 0
}
=================================================
If I run this command nothing happens:
[n8gray@golux sounds]$ aplay -D mixed KDE_Beep_ClockChime.wav Playing WAVE 'KDE_Beep_ClockChime.wav' : Unsigned 8 bit, Rate 7418 Hz, Mono
I get no sound, no error, aplay uses no cpu time. Here's the tail end of the same command under strace:open("KDE_Beep_ClockChime.wav", O_RDONLY) = 5read(5, "RIFF\256\17\0\0WAVEfmt \20\0\0\0\1\0\1\0", 24) = 24read(5, "\372\34", 2) = 2read(5, "\0\0\372\34\0\0\1\0\10\0", 10) = 10read(5, "data\212\17\0\0", 8) = 8write(2, "Playing WAVE \'KDE_Beep_ClockChim"..., 41Playing WAVE 'KDE_Beep_ClockChime.wav' : ) = 41write(2, "Unsigned 8 bit, ", 16Unsigned 8 bit, ) = 16write(2, "Rate 7418 Hz, ", 14Rate 7418 Hz, ) = 14write(2, "Mono", 4Mono) = 4
write(2, "\n", 1
) = 1
shmget(IPC_PRIVATE, 49152, 0x1b6|0666) = 10747908 shmat(10747908, 0, 0) = 0x40274000 shmget(IPC_PRIVATE, 12288, 0x1b6|0666) = 10780677 shmat(10780677, 0, 0) = 0x40023000
read(5, "G\214j\313\267hqG\234\250Yn;\206\274[e=t\305\207\217FM"...,
927) = 927
read(5, "\206\177U\217\214\207\211S\201\215\211\231[p\204\201\242"...,
927) = 927
poll([at this point the program just hangs]
If I run this command it completes but I get no sound output:
[n8gray@golux sounds]$ aplay -D mixed pop.wav
Playing WAVE 'pop.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono
The same file plays properly (with sound) if I leave out the "-D mixed" flag. This command, however, works perfectly:
[n8gray@golux sounds]$ aplay -D mixed info.wav
Playing WAVE 'info.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono
If I actually try to mix two streams, though, I get xruns and cracks in the sound:
[n8gray@golux sounds]$ aplay -D mixed info.wav & aplay -D mixed info.wav
[1] 12952
Playing WAVE 'info.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono
Playing WAVE 'info.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono
xrun!!! (at least 0.030 ms long)
xrun!!! (at least 0.008 ms long)
[1]+ Done aplay -D mixed info.wav
I've tried this experiment with long sounds to try to eliminate any startup inefficiency, but the cracks last as long as the streams are being mixed.
I'll be glad to help debug in any way I can. I've tried using the C versions of mix_areas1 and mix_areas2 and it doesn't help any of these problems.
Thanks,
-Nathan
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
-- Nathaniel Gray -- Caltech Computer Science ------> -- Mojave Project -- http://mojave.cs.caltech.edu -->
-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software. http://www.objectstore.net/sourceforge
nice. Your config just helped me make it work for me. I too have an intel8x0. (I also have some other gear, but in essence I can use alsaplayer and xmms on my intel8x0 simultaneously.) Not being an expert in .asound voodoo, I would say that yours is a bit more complicated than it needs to be. Without changing your .asound file, have you tried:
aplay -D mydmix test.wav
?
The only other difference is that I don't have rate 44100. It is my understanding that the intel8x0 is locked at 48000 for the hardware I have. My only gripe with dmix now is normalization. All the music I have is normalized and when I sum that up, it distorts, so I have to be careful. Also, jack doesn't like dmix. For starters, dmix is for playback only. Would be nice to be able to create a composite device that had dmix and dsnoop.... wait... that's jack! ;-)
d!
Quoted 113 lines · Nathaniel Gray
I'm sending this again since I got no response the first time and dmix does not appear to be under heavy development, despite how incredibly useful it would be if it worked.
[n8gray@golux alsa-lib-0.9.3]$ cat
/proc/asound/versionAdvanced Linux Sound Architecture Driver Version 0.9.3a. Compiled on May 9 2003 for kernel 2.4.21-0.16mm-mdkcustom. Using alsa-libs 0.9.3.The dmix plugin seems to be very unreliable, or else maybe I'm not setting it up correctly. Here's my asoundrc:
=================== .asoundrc =================== pcm.intel8x0 {
type hw
card 0
}ctl.intel8x0 {
type hw
card 0
}pcm.mydmix { type dmix ipc_key 12349 ipc_key_add_uid true slave { pcm "hw:0,0" # Setting this rate to 44100 seems to help rate 44100 } }ctl.mydmix {
type hw
card 0
}pcm.mixed { type plug slave { pcm mydmix } }ctl.mixed {
type hw
card 0
}
=================================================If I run this command nothing happens:
[n8gray@golux sounds]$ aplay -D mixed KDE_Beep_ClockChime.wav Playing WAVE 'KDE_Beep_ClockChime.wav' : Unsigned 8 bit, Rate 7418 Hz, MonoI get no sound, no error, aplay uses no cpu time. Here's the tail end of the same command under strace:
open("KDE_Beep_ClockChime.wav", O_RDONLY)= 5read(5, "RIFF\256\17\0\0WAVEfmt \20\0\0\0\1\0\1\0", 24)= 24read(5, "\372\34", 2)= 2read(5, "\0\0\372\34\0\0\1\0\10\0", 10)= 10read(5, "data\212\17\0\0", 8)= 8write(2, "Playing WAVE \'KDE_Beep_ClockChim"..., 41Playing WAVE 'KDE_Beep_ClockChime.wav' : )= 41write(2, "Unsigned 8 bit, ", 16Unsigned 8 bit, )= 16write(2, "Rate 7418 Hz, ", 14Rate 7418 Hz, )= 14write(2, "Mono", 4Mono)= 4
write(2, "\n", 1
) = 1shmget(IPC_PRIVATE, 49152, 0x1b6|0666) = 10747908 shmat(10747908, 0, 0) = 0x40274000 shmget(IPC_PRIVATE, 12288, 0x1b6|0666) = 10780677 shmat(10780677, 0, 0) = 0x40023000read(5, "G\214j\313\267hqG\234\250Yn;\206\274[e=t\305\207\217FM"...,
927) = 927
read(5, "\206\177U\217\214\207\211S\201\215\211\231[p\204\201\242"...,
927) = 927
poll([at this point the program just hangs]If I run this command it completes but I get no sound output:
[n8gray@golux sounds]$ aplay -D mixed pop.wav
Playing WAVE 'pop.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, MonoThe same file plays properly (with sound) if I leave out the "-D mixed" flag. This command, however, works perfectly:
[n8gray@golux sounds]$ aplay -D mixed info.wav
Playing WAVE 'info.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, MonoIf I actually try to mix two streams, though, I get xruns and cracks in the sound:
[n8gray@golux sounds]$ aplay -D mixed info.wav & aplay -D mixed info.wav
[1] 12952
Playing WAVE 'info.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono
Playing WAVE 'info.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono
xrun!!! (at least 0.030 ms long)
xrun!!! (at least 0.008 ms long)
[1]+ Done aplay -D mixed info.wavI've tried this experiment with long sounds to try to eliminate any startup inefficiency, but the cracks last as long as the streams are being mixed.
I'll be glad to help debug in any way I can. I've tried using the C versions of
mix_areas1andmix_areas2and it doesn't help any of these problems.Thanks,
-Nathan
Quoted 8 lines · David E. Storey
nice. Your config just helped me make it work for me. I too have an intel8x0. (I also have some other gear, but in essence I can use alsaplayer and xmms on my intel8x0 simultaneously.) Not being an expert in .asound voodoo, I would say that yours is a bit more complicated than it needs to be. Without changing your .asound file, have you tried:
aplay -D mydmix test.wav
I'm pretty sure that will only work if the sample you're playing is at the "correct" rate. In other words, dmix doesn't do any resampling, so if you try to play a file that has the wrong rate you'll get problems. That's the reason for the extra layer with the "plug" plugin -- it does rate conversion.
Quoted 3 lines
The only other difference is that I don't have rate 44100. It is my understanding that the intel8x0 is locked at 48000 for the hardware I have.
Certain files play with the "rate 44100" line and others don't, but more play with it than without it. I'd recommend testing it with the KDE_* files in /usr/share/sounds if you have KDE installed. They have lots of funky sampling rates that aplay seems to choke on.
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
-- Nathaniel Gray -- Caltech Computer Science ------> -- Mojave Project -- http://mojave.cs.caltech.edu -->
-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software. http://www.objectstore.net/sourceforge