Single process freeze when opening capture device
I have found what seems to be a bug in ALSA (CVS of this afternoon). When a program opens certain PCM devices for capture the program blocks forever in snd_pcm_open (both the library function and the kernel function actually). The PCM device I have been testing it with is surround40 on a emu10k1 (SBLive Value). I am trying to capture on this device because I want to have jack use surround40 (actually a route plugin device pointing to it) so that I can use all 4 outs and both ins at the same time.
Below is a minimal setup that reproduces the problem for me.
alsa_freeze.c
------------------
#include <alsa/asoundlib.h>
int main( int argc, char* argv[] )
{
snd_pcm_t *pcm;
snd_pcm_open(&pcm, "surround40", SND_PCM_STREAM_CAPTURE, 0);
return 0;
}------------------
.asoundrc
------------------
<confdir:cards/EMU10K1.conf>
------------------
using SysRq-T I captured a kernel stack trace
------------------
Using defaults from ksymoops -t elf32-i386 -a i386
Call Trace: [<e094908e>] [<e0922b20>] [<e0948f60>] [<e091b220>]
[<c018c325>]
[<c014bf59>] [<c013ea43>] [<c013e968>] [<c013ed43>] [<c010774f>]
Warning (Oops_read): Code line not seen, dumping what data is available
Proc; alsa_test_sim
Quoted 1 line
Quoted 1 line
EIP; 00000000 Before first symbol
Trace; e094908e <[snd-pcm]snd_pcm_open+12e/190>
Trace; e0922b20 <[snd]snd_fops+0/48>
Trace; e0948f60 <[snd-pcm]snd_pcm_open+0/190>
Trace; e091b220 <[snd]snd_open+e0/160>
Trace; c018c325 <devfs_open+195/210>
Trace; c014bf59 <path_lookup+39/40>
Trace; c013ea43 <dentry_open+d3/1e0>
Trace; c013e968 <filp_open+68/70>
Trace; c013ed43 <sys_open+53/c0>
Trace; c010774f <system_call+33/38>
------------------
I suspect that snd_pcm_open+12e is line 1974 in pcm_native.c. Everytime I checked it was at this address.
------------------
set_current_state(TASK_INTERRUPTIBLE);
schedule();
>>>> if (signal_pending(current)) { <<<
err = -ERESTARTSYS;
break;
}------------------
Please tell me you need anymore info or if you want me to try anything.
-Arthur
Signature · 8 lines
Arthur Peters <[email protected]> ------------------------------------------------------- This SF.net email is sponsored by: eBay Get office equipment for less on eBay! http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
Quoted 15 lines · Arthur Peters
I have found what seems to be a bug in ALSA (CVS of this afternoon). When a program opens certain PCM devices for capture the program blocks forever in
snd_pcm_open(both the library function and the kernel function actually). The PCM device I have been testing it with is surround40 on a emu10k1 (SBLive Value). I am trying to capture on this device because I want to have jack use surround40 (actually a route plugin device pointing to it) so that I can use all 4 outs and both ins at the same time.Below is a minimal setup that reproduces the problem for me.
alsa_freeze.c
------------------
#include <alsa/asoundlib.h>
Quoted 6 lines
int
main( int argc, char* argv[] ){ snd_pcm_t *pcm; snd_pcm_open(&pcm, "surround40", SND_PCM_STREAM_CAPTURE, 0); return 0; }
It is limit of current alsa-lib configuration. We cannot distinct playback and capture. But I am not sure, if returning an error helps you (surround40 configuration is NOT valid for emu10k1). I suggest to fix jack to allow different names for playback and capture with different count of channels.
Jaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project, SuSE Labs
-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
Jaroslav Kysela ha scritto:
Quoted 26 lines · Arthur Peters
Quoted 17 lines
I have found what seems to be a bug in ALSA (CVS of this afternoon). When a program opens certain PCM devices for capture the program blocks forever in
snd_pcm_open(both the library function and the kernel function actually). The PCM device I have been testing it with is surround40 on a emu10k1 (SBLive Value). I am trying to capture on this device because I want to have jack use surround40 (actually a route plugin device pointing to it) so that I can use all 4 outs and both ins at the same time.Below is a minimal setup that reproduces the problem for me.
alsa_freeze.c
------------------
#include <alsa/asoundlib.h>Quoted 6 lines
int
main( int argc, char* argv[] ){ snd_pcm_t *pcm; snd_pcm_open(&pcm, "surround40", SND_PCM_STREAM_CAPTURE, 0); return 0; }
Quoted 6 lines
It is limit of current alsa-lib configuration. We cannot distinct playback and capture. But I am not sure, if returning an error helps you (surround40 configuration is NOT valid for emu10k1). I suggest to fix jack to allow different names for playback and capture with different count of channels.
What about a "dir" field in common section of pcm configuration?
dir STR # PCM allowed directions "playback", "capture", "both" (default)
Signature · 12 lines
Abramo Bagnara mailto:[email protected] Opera Unica Phone: +39.546.656023 Via Emilia Interna, 140 48014 Castel Bolognese (RA) - Italy ------------------------------------------------------- This SF.net email is sponsored by: eBay Get office equipment for less on eBay! http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
Quoted 3 lines · Abramo Bagnara
What about a "dir" field in common section of pcm configuration?
dir STR # PCM allowed directions "playback", "capture", "both" (default)
I'd like to solve the problem with same names, but different configurations for streams.
I have an idea like:
pcm.name {
... global configuration ...
playback {
... playback configuration ...
}
capture {
... capture configuration ...
}
}Also, we have copy of configuration for each open which is used for run-time evaluation. I think that we may pass from the open code some more information and use some {} region as data caching:
private { # reserved for internal data only, warn and ignore if user defines it
direction playback ctl_cache_handle 0x%p # cache ctl handle for runtime evaluation ... etc, etc ... }
We may add condition (if - else) evaluation functions to runtime parsing which can test the contents of private variables. Now, we have same driver with different chip revisions which add/remove some features (mainly controls) and we need to test them to behave correctly.
Also, the first proposal requires to change all plugins, the later will rewrite the configuration at run-time, so no changes are required for plugins.
Jaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project, SuSE Labs
-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
hdsp9652+alsamixer -> kernel panic
dear alsa gurus!
i'm trying to get a rme hdsp 9652 to work, and have bad results:
loading snd-hammerfall-mem and snd-hdsp works fine, starting jack or some alsa-playback too (or at least seems to). but when i start alsamixer or alsactl and want to unmute the channels i get massive xruns and no sound, sometimes a kernel panic. i tried a pentium3- and a amd-duron system and ran into the same behavior.
the card worked for the previous owner, but i have no windows-system to test it there.
has anybody had similar expiriences or any hints for me? regards
d13b
my setup:
rme hdsp 9652 with adi8-ae interface
kernel 2.4.20 (straight forward)
latest alsa from cvs
cat /proc/asound/card0/hdsp gives me:
RME HDSP 9652 (Card #1)
Buffers: capture d4000000 playback d3e00000
IRQ: 12 Registers bus: 0xeb000000 VM: 0xdc8a2000
Control register: 0x10080de
Status register: 0x3400008
Status2 register: 0xffff8041
FIFO status: 0
MIDI1 Output status: 0xffffff00
MIDI1 Input status: 0xffffff38
MIDI2 Output status: 0xffffff00
MIDI2 Input status: 0xffffff38
Buffer Size (Latency): 8192 samples (2 periods of 32768 bytes) Hardware pointer (frames): 0
Passthru: no
Line out: on
Firmware version: 1
Sample Clock Source: Internal 48 kHz
Preferred Sync Reference: ADAT1
AutoSync Reference: ADAT1
AutoSync Frequency: 44100
System Clock Mode: Master
System Clock Frequency: 48000
IEC958 input: Internal
IEC958 output: Coaxial only
IEC958 quality: Consumer
IEC958 emphasis: off
IEC958 NonAudio: off
IEC958 sample rate: Error flag set
ADAT1: Lock
ADAT2: No Lock
ADAT3: No Lock
SPDIF: No Lock
Word Clock: No Lock
ADAT Sync: No Lock
-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
Re: hdsp9652+alsamixer -> kernel panic
Quoted 6 lines
dear alsa gurus!
i'm trying to get a rme hdsp 9652 to work, and have bad results:
loading snd-hammerfall-mem and snd-hdsp works fine, starting jack or some alsa-playback too (or at least seems to).
but when i start alsamixer or alsactl and want to unmute the channels i get massive xruns and no sound, sometimes a kernel panic.
we need a ksymoops-processed kernel panic trace.
if it makes you feel any better, i wrote a lot of the driver, and i can't even load it right now: it locks up my system during the boot process unconditionally.
i haven't reported it because it started doing this without any reinstall of the module, and it was working before the reboot.
--p
-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
Re: hdsp9652+alsamixer -> kernel panic
Quoted 3 lines
we need a ksymoops-processed kernel panic trace.
ok, since i'm more a musician than a kernel-hacker, i don't exactly know what to do with the panic output. i see EIP: 0010:[<c0280005>] and search for it in /var/log/ksymoops right?
there i find
...c0106298 __up_wakeupc02bfff4 csum_partial_copy_generic_Rsmp_e8aa9a96
...
so, what to do next?
Quoted 3 lines
if it makes you feel any better, i wrote a lot of the driver, and i can't even load it right now: it locks up my system during the boot process unconditionally.
no, that makes me feel even more lost :(
regards
d13b
-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
Re: hdsp9652+alsamixer -> kernel panic
Quoted 7 lines
ok, since i'm more a musician than a kernel-hacker, i don't exactly know what to do with the panic output.
i see EIP: 0010:[<c0280005>] and search for it in/var/log/ksymoopsright? there i find
...c0106298__up_wakeupc02bfff4csum_partial_copy_generic_Rsmp_e8aa9a96
ah. are you running on an SMP system with current ALSA CVS? if so, its broken within the "core" of ALSA. you will need to back up to April 27th to get a working SMP version. nobody has a fix for this at this time, despite the fact that it makes ALSA unusable on an SMP system.
-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
Re: hdsp9652+alsamixer -> kernel panic
Quoted 6 lines · Paul Davis
Quoted 2 lines
c0106298__up_wakeupc02bfff4csum_partial_copy_generic_Rsmp_e8aa9a96ah. are you running on an SMP system with current ALSA CVS? if so, its broken within the "core" of ALSA. you will need to back up to April 27th to get a working SMP version. nobody has a fix for this at this time, despite the fact that it makes ALSA unusable on an SMP system.
Hmm, anyway to easily and reliably reproduce the bug?
I'm running the latest ALSA and JACK CVS (updated both today) and works fine on my SMP box (dual-celeron). And so do my other ALSA apps. And this is not just with one card, I've tested both with es1371 and ice1712 (Delta44) and no panics yet.
Signature · 9 lines
http://www.eca.cx Audio software for Linux! ------------------------------------------------------- This SF.net email is sponsored by: eBay Get office equipment for less on eBay! http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
Re: hdsp9652+alsamixer -> kernel panic
Quoted 10 lines · Paul Davis
Quoted 7 lines
Quoted 3 lines
c0106298__up_wakeupc02bfff4csum_partial_copy_generic_Rsmp_e8aa9a96ah. are you running on an SMP system with current ALSA CVS? if so, its broken within the "core" of ALSA. you will need to back up to April 27th to get a working SMP version. nobody has a fix for this at this time, despite the fact that it makes ALSA unusable on an SMP system.
Hmm, anyway to easily and reliably reproduce the bug?
run jack? :))
Quoted 4 lines
I'm running the latest ALSA and JACK CVS (updated both today) and works fine on my SMP box (dual-celeron). And so do my other ALSA apps. And this is not just with one card, I've tested both with es1371 and ice1712 (Delta44) and no panics yet.
i should try an update and see if its been fixed. it wasn't last week.
--p
-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
Re: hdsp9652+alsamixer -> kernel panic
Quoted 6 lines · Paul Davis
Quoted 6 lines
Quoted 4 lines
ah. are you running on an SMP system with current ALSA CVS? if so, its broken within the "core" of ALSA. you will need to back up to April 27th to get a working SMP version. nobody has a fix for this at this time, despite the fact that it makes ALSA unusable on an SMP system.
Hmm, anyway to easily and reliably reproduce the bug?
sorry for all the noise on the list.
i am running a singleprocessor system, but forgot to turn off the smp support in the kernel config. now - after recompiling everything- the kernel doesn't panic any more when i adjust the output-levels, but i still get nothing but silence from my card.
regards
d13b
-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
Re: hdsp9652+alsamixer -> kernel panic
Quoted 5 lines
sorry for all the noise on the list.
i am running a singleprocessor system, but forgot to turn off the smp support in the kernel config. now - after recompiling everything- the kernel doesn't panic any more when i adjust the output-levels, but i still get nothing but silence from my card.
oh dear. now i realize that i didn't read your subject line carefully enough.
the hdsp 9652 driver has one major issue at this time. i have been in lots of contact with RME to get the problem resolved, but they have not followed through on the most recent requests. the driver is not setting the card up so that you can hear anything, even though it does actually run quite normally. nobody (myself, thomas or anyone else) knows what might be wrong, and RME have told me that in theory nothing is necessary to make this work: by default, the hdsp9652 works just like the old hammerfall (i.e. playback stream N is routed at unity gain to output stream N). so, we are basically waiting for RME to respond in some way. it will probably turn out to be a one or two line change. i wish i could tell you when it will happen, but that would be dishonest.
--p
-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
Re: hdsp9652+alsamixer -> kernel panic
In reply to Paul DavisQuoted 4 lines · Paul Davis
Quoted 3 lines
Quoted 2 lines
ah. are you running on an SMP system with current ALSA CVS? if so, its broken within the "core" of ALSA. you will need to back up to April
Hmm, anyway to easily and reliably reproduce the bug?
run jack? :))
Well, I've done a lot of testing during the last few days (including running jack :)), sometimes with both soundcards running at the same time, and still no oopses (system uptime now 5days). So ALSA+SMP seems to work fine at least on some systems.
Btw; kernel is 2.4.19 with ll-patches.
Signature · 9 lines
http://www.eca.cx Audio software for Linux! ------------------------------------------------------- This SF.net email is sponsored by: eBay Get office equipment for less on eBay! http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
Re: hdsp9652+alsamixer -> kernel panic
Quoted 5 lines · Kai Vehmanen
Quoted 3 lines · Paul Davis
Quoted 3 lines
Quoted 2 lines
ah. are you running on an SMP system with current ALSA CVS? if so, its broken within the "core" of ALSA. you will need to back up to April
Hmm, anyway to easily and reliably reproduce the bug?
Quoted 8 lines
Quoted 1 line
run jack? :))
Well, I've done a lot of testing during the last few days (including running jack :)), sometimes with both soundcards running at the same time, and still no oopses (system uptime now 5days). So ALSA+SMP seems to work fine at least on some systems.
Btw; kernel is 2.4.19 with ll-patches.
Thanks for this report. Also many thanks for Takashi's verification of new pcm link code (and broken spinlocks fixes).
Jaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project, SuSE Labs
-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
Re: hdsp9652+alsamixer -> kernel panic
In reply to Kai VehmanenAt Sat, 31 May 2003 14:15:50 +0300 (EEST),
Quoted 5 lines · Kai Vehmanen
Quoted 2 lines · Paul Davis
Quoted 2 lines
Quoted 2 lines
ah. are you running on an SMP system with current ALSA CVS? if so, its broken within the "core" of ALSA. you will need to back up to April
Quoted 7 lines
Quoted 2 lines
Quoted 1 line
Hmm, anyway to easily and reliably reproduce the bug?
run jack? :))
Well, I've done a lot of testing during the last few days (including running jack :)), sometimes with both soundcards running at the same time, and still no oopses (system uptime now 5days). So ALSA+SMP seems to work fine at least on some systems.
which card are you using?
if it's the card with linked-stream feature (like trident, hdsp, ice1712, etc.), the bug was likely solved. if not, we still need to investigate the behabior...
ciao,
Takashi
-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
Re: hdsp9652+alsamixer -> kernel panic
Quoted 6 lines · Takashi Iwai
Quoted 2 lines
running jack :)), sometimes with both soundcards running at the same time, and still no oopses (system uptime now 5days). So ALSA+SMP seems to work
which card are you using?
if it's the card with linked-stream feature (like trident, hdsp, ice1712, etc.), the bug was likely solved. if not, we still need to investigate the behabior...
One Delta44/ice1712 and one ens1371.
Signature · 9 lines
http://www.eca.cx Audio software for Linux! ------------------------------------------------------- This SF.net email is sponsored by: eBay Get office equipment for less on eBay! http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
Re: hdsp9652+alsamixer -> kernel panic
In reply to Paul DavisQuoted 8 lines · Paul Davis
Quoted 7 lines
ok, since i'm more a musician than a kernel-hacker, i don't exactly know what to do with the panic output.
i see EIP: 0010:[<c0280005>] and search for it in/var/log/ksymoopsright? there i find
...c0106298__up_wakeupc02bfff4csum_partial_copy_generic_Rsmp_e8aa9a96
Quoted 4 lines
ah. are you running on an SMP system with current ALSA CVS? if so, its broken within the "core" of ALSA. you will need to back up to April 27th to get a working SMP version. nobody has a fix for this at this time, despite the fact that it makes ALSA unusable on an SMP system.
Anybody is willing to turn spinlock debugging in SMP kernel? I posted twice the guide... Edit linux/include/linux/spinlock.h:
#define DEBUG_SPINLOCKS 0 /* 0 == no debugging, 1 == maintain lock state, 2 == full debug */
Jaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project, SuSE Labs
-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
Re: hdsp9652+alsamixer -> kernel panic
Quoted 10 lines · Paul Davis
Quoted 9 lines
Quoted 8 lines
ok, since i'm more a musician than a kernel-hacker, i don't exactly know what to do with the panic output.
i see EIP: 0010:[<c0280005>] and search for it in/var/log/ksymoopsright? there i find
...c0106298__up_wakeupc02bfff4csum_partial_copy_generic_Rsmp_e8aa9a96
Quoted 7 lines
Quoted 4 lines
ah. are you running on an SMP system with current ALSA CVS? if so, its broken within the "core" of ALSA. you will need to back up to April 27th to get a working SMP version. nobody has a fix for this at this time, despite the fact that it makes ALSA unusable on an SMP system.
Anybody is willing to turn spinlock debugging in SMP kernel? I posted twice the guide... Edit
linux/include/linux/spinlock.h:
somebody already replied that this #define only has any impact in non-SMP mode. i haven't checked if this was true, it didn't seem unlikely.
-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
Jaroslav Kysela ha scritto:
Quoted 12 lines · Abramo Bagnara
Quoted 5 lines
What about a "dir" field in common section of pcm configuration?
dir STR # PCM allowed directions "playback", "capture", "both" (default)
I'd like to solve the problem with same names, but different configurations for streams.
I have an idea like:
Quoted 9 lines
pcm.name {
... global configuration ...
playback {
... playback configuration ...
}
capture {
... capture configuration ...
}
}I'm far from convinced that to have same name for different things is a good idea, and in this case I'd propose to have:
pcmc.name {
}
pcmp.name {
}
then specifying different namespaces for different things.
This also permits to leave current
pcm.name {
}
unmodified (although with lower priority wrt pcmc and pcmp).
Quoted 4 lines
Also, we have copy of configuration for each open which is used for run-time evaluation. I think that we may pass from the open code some more information and use some {} region as data caching:
private { # reserved for internal data only, warn and ignore if user defines it
Quoted 8 lines
direction playback ctl_cache_handle 0x%p # cache ctl handle for runtime evaluation ... etc, etc ... }We may add condition (if - else) evaluation functions to runtime parsing which can test the contents of private variables. Now, we have same driver with different chip revisions which add/remove some features (mainly controls) and we need to test them to behave correctly.
Also, the first proposal requires to change all plugins, the later will rewrite the configuration at run-time, so no changes are required for plugins.
I've reread many times this last part but I'm unable to understand what's your idea. Can you rephrase?
Signature · 12 lines
Abramo Bagnara mailto:[email protected] Opera Unica Phone: +39.546.656023 Via Emilia Interna, 140 48014 Castel Bolognese (RA) - Italy ------------------------------------------------------- This SF.net email is sponsored by: eBay Get office equipment for less on eBay! http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
At Thu, 29 May 2003 15:13:11 +0200,
Quoted 34 lines · Abramo Bagnara
Jaroslav Kysela ha scritto:
Quoted 13 lines · Abramo Bagnara
Quoted 5 lines
What about a "dir" field in common section of pcm configuration?
dir STR # PCM allowed directions "playback", "capture", "both" (default)
I'd like to solve the problem with same names, but different configurations for streams.
I have an idea like:
Quoted 9 lines
pcm.name { ... global configuration ... playback { ... playback configuration ... } capture { ... capture configuration ... } }I'm far from convinced that to have same name for different things is a good idea, and in this case I'd propose to have:
pcmc.name {
}pcmp.name {
}
Quoted 7 lines
then specifying different namespaces for different things.
This also permits to leave current
pcm.name {
}unmodified (although with lower priority wrt pcmc and pcmp).
i would accept both ideas.
IIRC, the pcm is looked up through the definition in /usr/share/alsa/alsa.conf, so if we have pcmc and pcmp definitions, we'll need to rewrite (add) these look-up, too?
Takashi
-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
Quoted 10 lines · Jaroslav Kysela
It is limit of current alsa-lib configuration. We cannot distinct playback and capture. But I am not sure, if returning an error helps you (surround40 configuration is NOT valid for emu10k1). I suggest to fix jack to allow different names for playback and capture with different count of channels.
Jaroslav
Surround40 playback seems to work on my SB Live emu10k1.
Some SB Live cards have 2 stereo audio inputs, so in theory they should be able to do Surround40 capture as well. Can the SB Live do 4 channel full duplex, or is there another factor involved.
Cheers
James
-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
Quoted 9 lines · James Courtier-Dutton
Quoted 8 lines · Jaroslav Kysela
It is limit of current alsa-lib configuration. We cannot distinct playback and capture. But I am not sure, if returning an error helps you (surround40 configuration is NOT valid for emu10k1). I suggest to fix jack to allow different names for playback and capture with different count of channels.
Quoted 7 lines
Quoted 2 lines
Jaroslav
Surround40 playback seems to work on my SB Live emu10k1. Some SB Live cards have 2 stereo audio inputs, so in theory they should be able to do Surround40 capture as well.
Can the SB Live do 4 channel full duplex, or is there another factor involved.
The multichannel capture must be implemented using the FX DSP code (like raw S/PDIF). The standard capture device for emu10k1 can handle only stereo stream.
Jaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project, SuSE Labs
-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5