Skip to contentSkip to conversation

thermal: core: More cleanups after bind/unbind changes

PATCH New Rafael J. Wysocki 1 participant 5 messages Aug 26, 2024 Thermal

lore
Share & tools
lore
#1 lore raw

PATCH 1/4 thermal: core: Drop redundant lockdep_assert_held()

From: Rafael J. Wysocki <[email protected]>

Along the lines of commit 24aad192c671 ("thermal: core: Drop redundant checks from thermal_bind_cdev_to_trip()") notice that thermal_unbind_cdev_from_trip() is only called by thermal_zone_cdev_unbind() under the thermal zone lock, so it need not use lockdep_assert_held() for that lock.

No functional impact.

---
 drivers/thermal/thermal_core.c |    2 --
 1 file changed, 2 deletions(-)
drivers/thermal/thermal_core.c +0 -2
Index: linux-pm/drivers/thermal/thermal_core.c
===================================================================
@@ -891,8 +891,6 @@ static void thermal_unbind_cdev_from_tri
 {
 	struct thermal_instance *pos, *next;
 
-	lockdep_assert_held(&tz->lock);
-
 	mutex_lock(&cdev->lock);
 	list_for_each_entry_safe(pos, next, &tz->thermal_instances, tz_node) {
 		if (pos->trip == trip && pos->cdev == cdev) {
#2 lore raw

PATCH 2/4 thermal: core: Drop dead code from monitor_thermal_zone()

In reply to Rafael J. Wysocki

From: Rafael J. Wysocki <[email protected]>

Since monitor_thermal_zone() is only called when the given thermal zone has been enabled, as per the thermal_zone_device_is_enabled() check in __thermal_zone_device_update(), the tz->mode check in it always evaluates to "false" and the thermal_zone_device_set_polling() invocation depending on it is dead code, so drop it.

No functional impact.

---
 drivers/thermal/thermal_core.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/thermal/thermal_core.c +1 -3
Index: linux-pm/drivers/thermal/thermal_core.c
===================================================================
@@ -364,9 +364,7 @@ static void thermal_zone_recheck(struct
 
 static void monitor_thermal_zone(struct thermal_zone_device *tz)
 {
-	if (tz->mode != THERMAL_DEVICE_ENABLED)
-		thermal_zone_device_set_polling(tz, 0);
-	else if (tz->passive > 0)
+	if (tz->passive > 0)
 		thermal_zone_device_set_polling(tz, tz->passive_delay_jiffies);
 	else if (tz->polling_delay_jiffies)
 		thermal_zone_device_set_polling(tz, tz->polling_delay_jiffies);
#3 lore raw

PATCH 3/4 thermal: core: Check passive delay in monitor_thermal_zone()

In reply to Rafael J. Wysocki

From: Rafael J. Wysocki <[email protected]>

The only case in which thermal_zone_device_set_polling() is called with its second argument equal to zero is when passive cooling is under way and passive_delay_jiffies is 0, which only happens when the given thermal zone is not polled at all.

If monitor_thermal_zone() is modified to check passive_delay_jiffies directly, the check of the thermal_zone_device_set_polling() second argument against 0 can be dropped and a passive_delay check can be dropped from thermal_zone_device_register_with_trips(), so change the code accordingly.

No intentional functional impact.

---
 drivers/thermal/thermal_core.c |   16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)
drivers/thermal/thermal_core.c +3 -13
Index: linux-pm/drivers/thermal/thermal_core.c
===================================================================
@@ -323,11 +323,6 @@ static void thermal_zone_broken_disable(
 static void thermal_zone_device_set_polling(struct thermal_zone_device *tz,
 					    unsigned long delay)
 {
-	if (!delay) {
-		cancel_delayed_work(&tz->poll_queue);
-		return;
-	}
-
 	if (delay > HZ)
 		delay = round_jiffies_relative(delay);
 
@@ -364,7 +359,7 @@ static void thermal_zone_recheck(struct
 
 static void monitor_thermal_zone(struct thermal_zone_device *tz)
 {
-	if (tz->passive > 0)
+	if (tz->passive > 0 && tz->passive_delay_jiffies)
 		thermal_zone_device_set_polling(tz, tz->passive_delay_jiffies);
 	else if (tz->polling_delay_jiffies)
 		thermal_zone_device_set_polling(tz, tz->polling_delay_jiffies);
@@ -1411,13 +1406,8 @@ thermal_zone_device_register_with_trips(
 	if (num_trips > 0 && !trips)
 		return ERR_PTR(-EINVAL);
 
-	if (polling_delay) {
-		if (passive_delay > polling_delay)
-			return ERR_PTR(-EINVAL);
-
-		if (!passive_delay)
-			passive_delay = polling_delay;
-	}
+	if (polling_delay && passive_delay > polling_delay)
+		return ERR_PTR(-EINVAL);
 
 	if (!thermal_class)
 		return ERR_PTR(-ENODEV);
#4 lore raw

PATCH 4/4 thermal: core: Drop thermal_zone_device_is_enabled()

In reply to Rafael J. Wysocki

From: Rafael J. Wysocki <[email protected]>

There are only two callers of thermal_zone_device_is_enabled() and one of them call is under the zone lock and the other one uses lockdep_assert_held() on that lock. Thus the lockdep_assert_held() in thermal_zone_device_is_enabled() is redundant and it could be dropped, but then the function would merely become a wrapper around a simple tz->mode check that is more convenient to do directly.

Accordingly, drop thermal_zone_device_is_enabled() altogether and update its callers to check tz->mode directly as appropriate.

While at it, combine the tz->mode and tz->suspended checks in __thermal_zone_device_update() because they are of a similar category and if any of them evaluates to "true", the outcome is the same.

No intentinal functional impact.

---
 drivers/thermal/thermal_core.c  |   12 +-----------
 drivers/thermal/thermal_core.h  |    3 ---
 drivers/thermal/thermal_sysfs.c |    2 +-
 3 files changed, 2 insertions(+), 15 deletions(-)
drivers/thermal/thermal_core.c +1 -11
Index: linux-pm/drivers/thermal/thermal_core.c
===================================================================
@@ -547,10 +547,7 @@ void __thermal_zone_device_update(struct
 	int low = -INT_MAX, high = INT_MAX;
 	int temp, ret;
 
-	if (tz->suspended)
-		return;
-
-	if (!thermal_zone_device_is_enabled(tz))
+	if (tz->suspended || tz->mode != THERMAL_DEVICE_ENABLED)
 		return;
 
 	ret = __thermal_zone_get_temp(tz, &temp);
@@ -652,13 +649,6 @@ int thermal_zone_device_disable(struct t
 }
 EXPORT_SYMBOL_GPL(thermal_zone_device_disable);
 
-int thermal_zone_device_is_enabled(struct thermal_zone_device *tz)
-{
-	lockdep_assert_held(&tz->lock);
-
-	return tz->mode == THERMAL_DEVICE_ENABLED;
-}
-
 static bool thermal_zone_is_present(struct thermal_zone_device *tz)
 {
 	return !list_empty(&tz->node);
drivers/thermal/thermal_core.h +0 -3
Index: linux-pm/drivers/thermal/thermal_core.h
===================================================================
@@ -284,7 +284,4 @@ thermal_cooling_device_stats_update(stru
 				    unsigned long new_state) {}
 #endif /* CONFIG_THERMAL_STATISTICS */
 
-/* device tree support */
-int thermal_zone_device_is_enabled(struct thermal_zone_device *tz);
-
 #endif /* __THERMAL_CORE_H__ */
drivers/thermal/thermal_sysfs.c +1 -1
Index: linux-pm/drivers/thermal/thermal_sysfs.c
===================================================================
@@ -53,7 +53,7 @@ mode_show(struct device *dev, struct dev
 	int enabled;
 
 	mutex_lock(&tz->lock);
-	enabled = thermal_zone_device_is_enabled(tz);
+	enabled = tz->mode == THERMAL_DEVICE_ENABLED;
 	mutex_unlock(&tz->lock);
 
 	return sprintf(buf, "%s\n", enabled ? "enabled" : "disabled");