fixes to CVS iptables.8 and ip6tables.8 man pages
Hi,
Michael Haardt <[email protected]> made the suggestion that the assertion "every packet only passes through one of the three chains" is wrong, since both INPUT and OUTPUT chains are involved in the case of loopback traffic. That's a little detail, but I made it clear in both iptables and ip6tables man pages anyway.
Tatsuo Sekine <[email protected]> submitted some cosmetic fixes for iptables(8). I adapted them to the CVS version, and ported them to CVS ip6tables.8
For ip6tables.8, I ported some of the fixes already applied to iptables.8 in CVS: please try to keep both manpages in sync... updating only one of them at once is the best way to forget something and get inconsistencies... (not a big deal here, but let's try to get the habit to do things properly ;-)
So, here they are:
- port fix "correct manpage about information on '--syn' behaviour (Steve Snodgrass)",
- Martin added as Core Team Member (Jozsef)
Other fix:
- there is no NAT for ip6tables yet: example updated accordingly.
Question:
iptables supports icmp-admin-prohibited, whereas ip6tables icmp6-adm-prohibited (adm vs. admin). And in ip6tables, we can find things like addr-unreach and icmp6-addr-unreachable (unreach vs. unreachable). Why such name inconsistencies?
Herve
Signature · 4 lines
_ (°= Hervé Eychenne //) v_/_ WallFire project: http://www.wallfire.org/
iptables.8.new renamed from iptables.8.old +52 -41
@@ -91,8 +91,9 @@ that table if it is not already there. The tables are as follows: -.TP -.B "filter" +.RS +.TP .4i +.BR "filter" : This is the default table (if no -t option is passed). It contains the built-in chains .B INPUT
@@ -102,7 +103,7 @@ .B OUTPUT (for locally-generated packets). .TP -.B "nat" +.BR "nat" : This table is consulted when a packet that creates a new connection is encountered. It consists of three built-ins: .B PREROUTING
@@ -112,7 +113,7 @@ .B POSTROUTING (for altering packets as they are about to go out). .TP -.B "mangle" +.BR "mangle" : This table is used for specialized packet alteration. Until kernel 2.4.17 it had two built-in chains: .B PREROUTING
@@ -126,6 +127,7 @@ (for altering packets being routed through the box), and .B POSTROUTING (for altering packets as they are about to go out). +.RE .SH OPTIONS The options that are recognized by .B iptables
@@ -166,9 +168,9 @@ List all rules in the selected chain. If no chain is selected, all chains are listed. As every other iptables command, it applies to the specified table (filter is the default), so NAT rules get listed by -.br +.nf iptables -t nat -n -L -.br +.fi Please note that it is often used with the .B -n option, in order to avoid long reverse DNS lookups.
@@ -177,9 +179,9 @@ (zero) option as well, in which case the chain(s) will be atomically listed and zeroed. The exact output is affected by the other arguments given. The exact rules are suppressed until you use -.br +.nf iptables -L -v -.br +.fi .TP .BR "-F, --flush " "[\fIchain\fP]" Flush the selected chain (all the chains in the table if none is given).
@@ -450,12 +452,13 @@ .TP .BI "--helper " "string" Matches packets related to the specified conntrack-helper. -.TP +.RS +.PP string can be "ftp" for packets related to a ftp-session on default port. For other ports append -portnr to the value, ie. "ftp-2121". -.br +.PP Same rules apply for other conntrack-helpers. -.br +.RE .SS icmp This extension is loaded if `--protocol icmp' is specified. It provides the following option:
@@ -463,9 +466,9 @@ .BR "--icmp-type " "[!] \fItypename\fP" This allows specification of the ICMP type, which can be a numeric ICMP type, or one of the ICMP type names shown by the command -.br +.nf iptables -p icmp -h -.br +.fi .SS length This module matches the length of a packet against a specific value or range of values.
@@ -650,9 +653,9 @@ set. Flags are: .BR "SYN ACK FIN RST URG PSH ALL NONE" . Hence the command -.br +.nf iptables -A FORWARD -p tcp --tcp-flags SYN,ACK,FIN,RST SYN -.br +.fi will only match packets with the SYN flag set, and the ACK, FIN and RST flags unset. .TP
@@ -730,7 +733,8 @@ .BR "-p udp" ). If no port range is specified, then the destination port will never be modified. -.TP +.RS +.PP You can add several --to-destination options. If you specify more than one destination address, either via an address range or multiple --to-destination options, a simple round-robin (one after another in
@@ -860,13 +864,15 @@ .TP .BI "--reject-with " "type" The type given can be -.BR icmp-net-unreachable , -.BR icmp-host-unreachable , -.BR icmp-port-unreachable , -.BR icmp-proto-unreachable , -.BR icmp-net-prohibited , -.BR "icmp-host-prohibited or" -.BR "icmp-admin-prohibited (*)" +.nf +.B " icmp-net-unreachable" +.B " icmp-host-unreachable" +.B " icmp-port-unreachable" +.B " icmp-proto-unreachable" +.B " icmp-net-prohibited" +.B " icmp-host-prohibited or" +.B " icmp-admin-prohibited (*)" +.fi which return the appropriate ICMP error message (\fBport-unreachable\fP is the default). The option .B tcp-reset
@@ -898,7 +904,8 @@ mapped to other ports below 512: those between 512 and 1023 inclusive will be mapped to ports below 1024, and other ports will be mapped to 1024 or above. Where possible, no port alteration will occur. -.TP +.RS +.PP You can add several --to-source options. If you specify more than one source address, either via an address range or multiple --to-source options, a simple round-robin (one after another in
@@ -915,19 +922,25 @@ problem are that everything works fine from your Linux firewall/router, but machines behind it can never exchange large packets: -.br - 1) Web browsers connect, then hang with no data received. -.br - 2) Small mail works fine, but large emails hang. -.br - 3) ssh works fine, but scp hangs after initial handshaking. -.br +.PD 0 +.RS 0.1i +.TP 0.3i +1) +Web browsers connect, then hang with no data received. +.TP +2) +Small mail works fine, but large emails hang. +.TP +3) +ssh works fine, but scp hangs after initial handshaking. +.RE +.PD Workaround: activate this option and add a rule to your firewall configuration like: -.br +.nf iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN \\ -.br -j TCPMSS --clamp-mss-to-pmtu +.fi .TP .BI "--set-mss " "value" Explicitly set MSS option to specified value.
@@ -944,9 +957,9 @@ .TP .BI "--set-tos " "tos" You can use a numeric TOS values, or use -.br +.nf iptables -j TOS -h -.br +.fi to see the list of valid TOS names. .SS ULOG This target provides userspace logging of matching packets. When this
@@ -994,7 +1007,8 @@ .B OUTPUT are only traversed for packets coming into the local host and originating from the local host respectively. Hence every packet only -passes through one of the three chains; previously a forwarded packet +passes through one of the three chains (except loopback traffic, which +involves both INPUT and OUTPUT chains); previously a forwarded packet would pass through all three. .PP The other main difference is that
@@ -1011,13 +1025,11 @@ optional extension modules. This should simplify much of the previous confusion over the combination of IP masquerading and packet filtering seen previously. So the following options are handled differently: -.br +.nf -j MASQ -.br -M -S -.br -M -L -.br +.fi There are several other changes in iptables. .SH SEE ALSO .BR iptables-save (8),
@@ -1052,7 +1064,6 @@ James Morris, Harald Welte and Rusty Russell. .PP Man page written by Herve Eychenne <[email protected]>. - .\" .. and did I mention that we are incredibly cool people? .\" .. sexy, too .. .\" .. witty, charming, powerful ..
ip6tables.8.new renamed from ip6tables.8.old +31 -27
128 lines not on this page · raw message
Quoted 1 line · Herve Eychenne
- Martin added as Core Team Member (Jozsef)
If you look at the patch it looks like Jozsef does twice as much work as the rest of us...
If you fix that part so it's corrent and resubmit the patches again I'll probably apply it :)
Signature · 1 line
/Martin
Quoted 6 lines · Martin Josefsson
Quoted 1 line · Herve Eychenne
- Martin added as Core Team Member (Jozsef)
If you look at the patch it looks like Jozsef does twice as much work as the rest of us...
Oh my god. Not only he does twice, but he seemed to have stolen your own work... shame on him. ;-)
Quoted 2 lines
If you fix that part so it's corrent and resubmit the patches again I'll probably apply it :)
I'm sorry. Fixed.
So here are the corrected patches, with another fix:
the complete removal of -C (which still appeared in the SYNOPSIS).
Herve
Signature · 4 lines
_ (°= Hervé Eychenne //) v_/_ WallFire project: http://www.wallfire.org/
iptables.8.new renamed from iptables.8.old +53 -42
@@ -25,7 +25,7 @@ .SH NAME iptables \- administration tool for IPv4 packet filtering and NAT .SH SYNOPSIS -.BR "iptables [-t table] -[ADC] " "chain rule-specification [options]" +.BR "iptables [-t table] -[AD] " "chain rule-specification [options]" .br .BR "iptables [-t table] -I " "chain [rulenum] rule-specification [options]" .br
@@ -91,8 +91,9 @@ that table if it is not already there. The tables are as follows: -.TP -.B "filter" +.RS +.TP .4i +.BR "filter" : This is the default table (if no -t option is passed). It contains the built-in chains .B INPUT
@@ -102,7 +103,7 @@ .B OUTPUT (for locally-generated packets). .TP -.B "nat" +.BR "nat" : This table is consulted when a packet that creates a new connection is encountered. It consists of three built-ins: .B PREROUTING
@@ -112,7 +113,7 @@ .B POSTROUTING (for altering packets as they are about to go out). .TP -.B "mangle" +.BR "mangle" : This table is used for specialized packet alteration. Until kernel 2.4.17 it had two built-in chains: .B PREROUTING
@@ -126,6 +127,7 @@ (for altering packets being routed through the box), and .B POSTROUTING (for altering packets as they are about to go out). +.RE .SH OPTIONS The options that are recognized by .B iptables
@@ -166,9 +168,9 @@ List all rules in the selected chain. If no chain is selected, all chains are listed. As every other iptables command, it applies to the specified table (filter is the default), so NAT rules get listed by -.br +.nf iptables -t nat -n -L -.br +.fi Please note that it is often used with the .B -n option, in order to avoid long reverse DNS lookups.
@@ -177,9 +179,9 @@ (zero) option as well, in which case the chain(s) will be atomically listed and zeroed. The exact output is affected by the other arguments given. The exact rules are suppressed until you use -.br +.nf iptables -L -v -.br +.fi .TP .BR "-F, --flush " "[\fIchain\fP]" Flush the selected chain (all the chains in the table if none is given).
@@ -450,12 +452,13 @@ .TP .BI "--helper " "string" Matches packets related to the specified conntrack-helper. -.TP +.RS +.PP string can be "ftp" for packets related to a ftp-session on default port. For other ports append -portnr to the value, ie. "ftp-2121". -.br +.PP Same rules apply for other conntrack-helpers. -.br +.RE .SS icmp This extension is loaded if `--protocol icmp' is specified. It provides the following option:
@@ -463,9 +466,9 @@ .BR "--icmp-type " "[!] \fItypename\fP" This allows specification of the ICMP type, which can be a numeric ICMP type, or one of the ICMP type names shown by the command -.br +.nf iptables -p icmp -h -.br +.fi .SS length This module matches the length of a packet against a specific value or range of values.
@@ -650,9 +653,9 @@ set. Flags are: .BR "SYN ACK FIN RST URG PSH ALL NONE" . Hence the command -.br +.nf iptables -A FORWARD -p tcp --tcp-flags SYN,ACK,FIN,RST SYN -.br +.fi will only match packets with the SYN flag set, and the ACK, FIN and RST flags unset. .TP
@@ -730,7 +733,8 @@ .BR "-p udp" ). If no port range is specified, then the destination port will never be modified. -.TP +.RS +.PP You can add several --to-destination options. If you specify more than one destination address, either via an address range or multiple --to-destination options, a simple round-robin (one after another in
@@ -860,13 +864,15 @@ .TP .BI "--reject-with " "type" The type given can be -.BR icmp-net-unreachable , -.BR icmp-host-unreachable , -.BR icmp-port-unreachable , -.BR icmp-proto-unreachable , -.BR icmp-net-prohibited , -.BR "icmp-host-prohibited or" -.BR "icmp-admin-prohibited (*)" +.nf +.B " icmp-net-unreachable" +.B " icmp-host-unreachable" +.B " icmp-port-unreachable" +.B " icmp-proto-unreachable" +.B " icmp-net-prohibited" +.B " icmp-host-prohibited or" +.B " icmp-admin-prohibited (*)" +.fi which return the appropriate ICMP error message (\fBport-unreachable\fP is the default). The option .B tcp-reset
@@ -898,7 +904,8 @@ mapped to other ports below 512: those between 512 and 1023 inclusive will be mapped to ports below 1024, and other ports will be mapped to 1024 or above. Where possible, no port alteration will occur. -.TP +.RS +.PP You can add several --to-source options. If you specify more than one source address, either via an address range or multiple --to-source options, a simple round-robin (one after another in
@@ -915,19 +922,25 @@ problem are that everything works fine from your Linux firewall/router, but machines behind it can never exchange large packets: -.br - 1) Web browsers connect, then hang with no data received. -.br - 2) Small mail works fine, but large emails hang. -.br - 3) ssh works fine, but scp hangs after initial handshaking. -.br +.PD 0 +.RS 0.1i +.TP 0.3i +1) +Web browsers connect, then hang with no data received. +.TP +2) +Small mail works fine, but large emails hang. +.TP +3) +ssh works fine, but scp hangs after initial handshaking. +.RE +.PD Workaround: activate this option and add a rule to your firewall configuration like: -.br +.nf iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN \\ -.br -j TCPMSS --clamp-mss-to-pmtu +.fi .TP .BI "--set-mss " "value" Explicitly set MSS option to specified value.
@@ -944,9 +957,9 @@ .TP .BI "--set-tos " "tos" You can use a numeric TOS values, or use -.br +.nf iptables -j TOS -h -.br +.fi to see the list of valid TOS names. .SS ULOG This target provides userspace logging of matching packets. When this
@@ -994,7 +1007,8 @@ .B OUTPUT are only traversed for packets coming into the local host and originating from the local host respectively. Hence every packet only -passes through one of the three chains; previously a forwarded packet +passes through one of the three chains (except loopback traffic, which +involves both INPUT and OUTPUT chains); previously a forwarded packet would pass through all three. .PP The other main difference is that
@@ -1011,13 +1025,11 @@ optional extension modules. This should simplify much of the previous confusion over the combination of IP masquerading and packet filtering seen previously. So the following options are handled differently: -.br +.nf -j MASQ -.br -M -S -.br -M -L -.br +.fi There are several other changes in iptables. .SH SEE ALSO .BR iptables-save (8),
@@ -1052,7 +1064,6 @@ James Morris, Harald Welte and Rusty Russell. .PP Man page written by Herve Eychenne <[email protected]>. - .\" .. and did I mention that we are incredibly cool people? .\" .. sexy, too .. .\" .. witty, charming, powerful ..
ip6tables.8.new renamed from ip6tables.8.old +32 -28
136 lines not on this page · raw message
Martin Josefsson
AppliedQuoted 7 lines · Herve Eychenne
Quoted 4 lines
Quoted 1 line
- Martin added as Core Team Member (Jozsef)
If you look at the patch it looks like Jozsef does twice as much work as the rest of us...
Oh my god. Not only he does twice, but he seemed to have stolen your own work... shame on him. ;-)
Yes he's one bad puppy :)
Quoted 6 lines
Quoted 2 lines
If you fix that part so it's corrent and resubmit the patches again I'll probably apply it :)
I'm sorry. Fixed.
So here are the corrected patches, with another fix:
the complete removal of -C (which still appeared in the SYNOPSIS).
Thanks, applied.
Signature · 1 line
/Martin