igb: Don't add PHY address to PCDL address
Subsystems (2)
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH 2/5 igb: Don't add PHY address to PCDL address
There is no reason to add the PHY address into the PCDL register address.
Signed-off-by Aaron Sierra <[email protected]>
--- drivers/net/ethernet/intel/igb/e1000_phy.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/net/ethernet/intel/igb/e1000_phy.c +1 -2
@@ -1734,8 +1734,7 @@ s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw) goto out;/* Get cable length from PHY Cable Diagnostics Control Reg */ - ret_val = phy->ops.read_reg (hw, (I347AT4_PCDL + phy->addr), - &phy_data); + ret_val = phy->ops.read_reg (hw,I347AT4_PCDL , &phy_data);if (ret_val) goto out;
Signature · 1 line
1.9.1
Brown
PATCH 2/5 igb: Don't add PHY address to PCDL address
Quoted 6 lines
From: Intel-wired-lan [intel-wired-lan-bounces at lists.osuosl.org] on behalf of Aaron Sierra [asierra at xes-inc.com]
Sent: Tuesday, November 03, 2015 10:37 AM
To: Kirsher, Jeffrey T; intel-wired-lan at lists.osuosl.org
Cc: Joe Schultz
Subject: [Intel-wired-lan] [PATCH 2/5] igb: Don't add PHY address to PCDL address
Quoted 6 lines
There is no reason to add the PHY address into the PCDL register address.
Signed-off-by Aaron Sierra <[email protected]>--- drivers/net/ethernet/intel/igb/e1000_phy.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
Tested-by Aaron Brown <[email protected]>