Remote Serial Console on 2.6.x ?

Hi,

I was used to debug my kernel code with the remote serial console facility on the 2.4.x serie, but I really can't figure how does it works to activate it on the 2.6.0-test9 that I just got.

I took a look at the relevant HOWTO:
http://www.tldp.org/HOWTO/Remote-Serial-Console-HOWTO/kernelcompile-25.html

But, it seems that all the configure scheme has changed for the 2.6.x...

Can anybody give me some pointers on a documentation or give me some hints ???

Regards

Emmanuel Fleury

Computer Science Department, |  Office: B1-201
Aalborg University,          |  Phone:  +45 96 35 72 23
Fredriks Bajersvej 7E,       |  Fax:    +45 98 15 98 89
9220 Aalborg East, Denmark   |  Email:  [email protected]

On Mon, 27 Oct 2003 10:58:29 +0100 Emmanuel Fleury <[email protected]> wrote:

| Hi,
| 
| I was used to debug my kernel code with the remote serial console
| facility on the 2.4.x serie, but I really can't figure how does it works
| to activate it on the 2.6.0-test9 that I just got.
| 
| I took a look at the relevant HOWTO:
| http://www.tldp.org/HOWTO/Remote-Serial-Console-HOWTO/kernelcompile-25.html
| 
| But, it seems that all the configure scheme has changed for the 2.6.x...
| 
| Can anybody give me some pointers on a documentation or give me some
| hints ???

Hi,

Here's how it looks in 2.6.0-test9:

Device Drivers:
Character devices:

    Serial drivers:
      <*> 8250/16550 and compatible serial support
          (CONFIG_SERIAL_8250=y)
      [*]   Console on 8250/16550 and compatible serial port
            (CONFIG_SERIAL_8250_CONSOLE=y)

HTH.
--
~Randy