RAID 10 and Persistent Superblock
A "simple" question regarding RAID 10. When I make a RAID 0 on top of three RAID 1 arrays, should I use "persistent superblock = 1" in that top level array? Won't that confuse the RAID software by putting two different UUIDs on the drives -- one for the RAID 1 arrays and one for the RAID 0 array?
As long as I have UUIDs for the three lower level RAID 1 arrays, I should be able to start those arrays with mdadm even if my device ids change.
Then shouldn't I be able to start the top level array without a UUID -- just by referring to the mdX numbers? In other words, if md0, md1, md2 start, there shouldn't be any confusion about which are the correct devices to start up md3. Or am I missing something?
Appreciate your answers.
Andy Liebman
I have a 56-disk RAID10 and I have persistent superblocks on all of the md devices. I believe the RAID code is smart enough to know that a superblock already exists and places a new superblock 'before' the other one.
So the end of your disk should look like the following drawing:
-----------------------------------| DATA | RAID0SB | RAID1SB | -----------------------------------|
When I created my RAID10 array, I believe that the superblocks were created in this fashion. Any RAID guru care to comment?
Regards,
Andy.
Quoted 20 lines · On Fri, 2003-10-31 at 10:23, [email protected] wrote:
A "simple" question regarding RAID 10. When I make a RAID 0 on top of three RAID 1 arrays, should I use "persistent superblock = 1" in that top level array? Won't that confuse the RAID software by putting two different UUIDs on the drives -- one for the RAID 1 arrays and one for the RAID 0 array?
As long as I have UUIDs for the three lower level RAID 1 arrays, I should be able to start those arrays with mdadm even if my device ids change.
Then shouldn't I be able to start the top level array without a UUID -- just by referring to the mdX numbers? In other words, if md0, md1, md2 start, there shouldn't be any confusion about which are the correct devices to start up md3. Or am I missing something?
Appreciate your answers.
Andy Liebman
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 3 lines
Regards, Andrew Rechenberg Infrastructure Team, Sherman Financial Group