Skip to contentSkip to conversation

Exception on host-PCI-bridge master-abort

DISCUSSION [email protected] 2 participants 2 messages Nov 7, 2003 – Nov 10, 2003

lore
Share & tools
lore
#0 lore raw

Items: custom PCI card, master-abort on host-PCI bridge, i386 PC, kernel 2.4.18

Hi,
I'm developing i386 linux drivers for a custom PCI card basically built on
a programmable FPGA.

Every time I re-program the FPGA (without re-booting the PC), the PCI configuration regs of the card are resetted, which makes memory and I/O aperture of the card disappearing from the PCI bus.

By calling pci_restore_state() I restore the proper configuration, but unfortunately sometimes I'm not fast enough, and the PC issues a read or write requests when the card is still wrong configured.
In such bad situation the PC freezes!

From the PCI spec, if a card does not respond, after a small timeout
a
master-abort situation will accour.

It will be desiderable having, e.g. a CPU exception when the host-PCI bridge fails with a master-abort.
By putting a pci_restore_state() call in the exception handler I could solve the problem.

Digging in the kernel code I didn't found a way for doing that. No PCI bridge for PC seems having such a feature. Isn't it?

Using a ARM Integrator platform instead of a PC, the solution seems easy. The V3 PCI controller is programmed to rise an exception when a master-abort accurs (v3_fault() in arch/arm/mach-integrator/pci_v3.c).

Please could you suggest me a way for getting this exception on PC?

Currently I'm using a PC with SIS620 chipset, but if you know solutions related with different chipsets, I'm ready to change MB.

Regards
Antonio Borneo
[email protected]

__________________________________________________________________
Tiscali ADSL SENZA CANONE, paghi solo quello che consumi! Navighi a 1,5 euro all'ora e il modem e' gratis! Abbonati subito.
http://point.tiscali.it/Adsl/prodotti/senzacanone/

#1 lore raw
Quoted 4 lines · On Fri, 2003-11-07 at 19:34, [email protected] wrote:

I'm developing i386 linux drivers for a custom PCI card basically built on
a programmable FPGA.

Quoted 8 lines

Every time I re-program the FPGA (without re-booting the PC), the PCI configuration regs of the card are resetted, which makes memory and I/O aperture of the card disappearing from the PCI bus.

By calling pci_restore_state() I restore the proper configuration, but unfortunately sometimes I'm not fast enough, and the PC issues a read or write requests when the card is still wrong configured.
In such bad situation the PC freezes!

I've dealt with cards like that, but without that sort of problem. Here's some things to think about:

1) Linux should not issue read or write requests to PCI devices randomly. If the request is directed to your card, are you sure that it isn't coming from your own driver code? If so, fix your driver.

2) If the fatal access is to another device, then does your device pass through an intermediate state where it corrupts accesses to other cards on the same bus? If so, you need to use a PCI-PCI bridge to put it on a bus by itself.

3) If it's a new custom card, worry about electrical issues. Maybe the FPGA configuration fails sometimes.

- Adrian Cox
http://www.humboldt.co.uk/