Skip to contentSkip to conversation

serverworks usb under 2.4.22

DISCUSSION Brian Beattie 2 participants 3 messages Nov 14, 2003

lore
Share & tools
lore
#0 lore raw

I've got a system with a Super Micro P3 dual processor board. This board uses the Serverworks chipset and the 2.4.22 kernel is unable to allocate an IRQ when initializing the USB (usb-ohic) interface. This board works fine under 2.4.20 and 2.4.21.

Any ideas?

Signature · 6 lines
Brian Beattie            | Experienced kernel hacker/embedded systems
[email protected] | programmer, direct or contract, short or
www.beattie-home.net     | long term, available immediately.

"Honor isn't about making the right choices.
It's about dealing with the consequences." -- Midori Koto
#1 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi Brian,
hi lkml,

Quoted 4 lines · Brian Beattie

I've got a system with a Super Micro P3 dual processor board. This board uses the Serverworks chipset and the 2.4.22 kernel is unable to allocate an IRQ when initializing the USB (usb-ohic) interface. This board works fine under 2.4.20 and 2.4.21.

Which Serverworks chipset? There are various.

I for one need to pass "noapic" on the kernel command line. Otherwise the IRQ routing is broken, I can't get the USB IRQ and the kernel complains. a lot about a broken APIC IRQ routing.

My board is an ASUS CUR-CLS. The chipset there is "ServerWorks LE".

Hop that helps.

Regards

Ingo Oeser

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)

iD8DBQE/tIlrU56oYWuOrkARAsPBAKDVHqTnQHRlgB7CdMphY70GpVn3fQCdE8bQ U4/gpKuad2q40FAPqmAeC6I=
=kUSh
-----END PGP SIGNATURE-----

#2 lore raw
Quoted 6 lines · Ingo Oeser

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi Brian,
hi lkml,

Quoted 7 lines
Quoted 4 lines · Brian Beattie

I've got a system with a Super Micro P3 dual processor board. This board uses the Serverworks chipset and the 2.4.22 kernel is unable to allocate an IRQ when initializing the USB (usb-ohic) interface. This board works fine under 2.4.20 and 2.4.21.

Which Serverworks chipset? There are various.

I posted that info ealier today.

Quoted 4 lines

I for one need to pass "noapic" on the kernel command line. Otherwise the IRQ routing is broken, I can't get the USB IRQ and the kernel complains. a lot about a broken APIC IRQ routing.

nopic did not seem to help

Signature · 6 lines
Brian Beattie            | Experienced kernel hacker/embedded systems
[email protected] | programmer, direct or contract, short or
www.beattie-home.net     | long term, available immediately.

"Honor isn't about making the right choices.
It's about dealing with the consequences." -- Midori Koto