Skip to contentSkip to conversation

LSI53C1030 (Fustion MPT) performance

DISCUSSION Karl Pitrich 2 participants 3 messages Nov 24, 2003 – Nov 25, 2003

lore
Share & tools
lore
#0 lore raw

hi,

i got a new ibm intellistation z pro dual xeon (6221-49G) with on board Fusion MPT chipset (LSI53C1030) and fast U160 disks.

2.4.20-8 (redhat) and 2.6.0-test9-vanilla
(each customer compiled minimal kernels)
both yield very poor disk performance.

i didn't do specific benkchmarking, but mv'ing a 3GB $HOME to another partition takes at least 4x the time as on my old P4 workstation with IDE drive.

is poor performance with this controller a known problem? could that have to do something with smp?

in 2.6.0, the driver's cvs-versions seem to match the ones in the sources offered by LSI for download.
lkml-archives and google weren't all too helpful.

any info/help apreciated,

/ karl

PS: in the course of this i studied dmesg and found:

calibrating APIC timer ...
..... CPU clock speed is 3066.0234 MHz.
..... host bus clock speed is 133.0314 MHz.

is 'host bus clock speed' != front side bus speed?
this shows up also on other p4 machines with much faster FSB than 133 mhz.

#1 lore raw
Quoted 14 lines · Karl Pitrich

hi,

i got a new ibm intellistation z pro dual xeon (6221-49G) with on board Fusion MPT chipset (LSI53C1030) and fast U160 disks.

2.4.20-8 (redhat) and 2.6.0-test9-vanilla
(each customer compiled minimal kernels)
both yield very poor disk performance.

i didn't do specific benkchmarking, but mv'ing a 3GB $HOME to another partition takes at least 4x the time as on my old P4 workstation with IDE drive.

Quoted 7 lines

is poor performance with this controller a known problem? could that have to do something with smp?

in 2.6.0, the driver's cvs-versions seem to match the ones in the sources offered by LSI for download.
lkml-archives and google weren't all too helpful.

The 2.6 driver runs nicely in single-disk mode but has been reported to run like a dog in RAID mode. I do not know if the 2.4 driver has the same problem.

#2 lore raw
Quoted 2 lines · Andrew Morton
Quoted 1 line · Karl Pitrich

<snip>

Quoted 4 lines
Quoted 1 line

The 2.6 driver runs nicely in single-disk mode but has been reported to run like a dog in RAID mode. I do not know if the 2.4 driver has the same problem.

well, i don't have a raid or mirror container configured.
the driver from 2.6.0-test9 (vanilla) runns nicely in fact, but is really, really slow, my UDMA IDE machine is quite fast compared to the MPT.
(FYI: colleagues having the same machine running win2003 also tell me the disks are relatively slow)

further, i kindly heard from Dan Creswell <[email protected]> that several people experience performance problems with this controller and that LSI is also aware of that and eager to fix this.

/ karl