ALSA 1.0.0pre3 release
Hi,
right now the ALSA 1.0.0pre3 packages are released.
In this version, alsa-tools package was divided to two several ones, alsa-tools and alsa-firmware. The latter contains only the firmware binary files required by loader programs in alsa-tools package. Please test them if you have a board requiring the loader (hdsp, mixart, vx, usx2y).
Especially, HDSP users, please test and report whether it works, since the hdsploader was modified to load the files dynamically.
Changes
- usb-audio driver supports async unlinking.
On 2.6 kernels, it's enabled as default, but on older kenrels, it's disabled to avoid a serious usb-uhci bug. If you have another controller, please try the module option async_unlink=1.
- hdsp driver update (including H9652 bugfixes).
- support of more Tascam USxxx devices.
- Audiotrak Prodigy bugfixes.
- fixed noise on vx222 with 24bit mode.
- complation fixes on alsa-drivers.
The 2.2 kernel is still not tested well. If you can test it, please let us know.
- fixed CM8738-MC6 5.1 alias.
- alsaconf fix for RH, Fedora and Mandrake.
- hdsp* tools updates. compilation fixes.
--
Takashi Iwai <[email protected]> ALSA Developer - www.alsa-project.org
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/
Quoted 4 lines · Takashi Iwai
Hi,
right now the ALSA 1.0.0pre3 packages are released.
Quoted 10 lines
In this version, alsa-tools package was divided to two several ones, alsa-tools and alsa-firmware. The latter contains only the firmware binary files required by loader programs in alsa-tools package. Please test them if you have a board requiring the loader (hdsp, mixart, vx, usx2y).
Especially, HDSP users, please test and report whether it works, since the hdsploader was modified to load the files dynamically.
mmap'ed sound with the cs46xx driver seems to be broken, every other half second the sound is muted. Non-mmap'ed sound plays normally. This is under 2.6.0-test9-mm5. The version included in test9-mm5 works as expected (there was some patches in mm5 against ALSA, but applying those to 1.0.0pre3 made no difference for this particular problem).
Signature · 9 lines
Ronny V. Vindenes <[email protected]> ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/
At Wed, 26 Nov 2003 01:11:07 +0100,
Quoted 17 lines · Ronny V. Vindenes
Quoted 4 lines · Takashi Iwai
Hi,
right now the ALSA 1.0.0pre3 packages are released.
Quoted 10 lines
In this version, alsa-tools package was divided to two several ones, alsa-tools and alsa-firmware. The latter contains only the firmware binary files required by loader programs in alsa-tools package. Please test them if you have a board requiring the loader (hdsp, mixart, vx, usx2y).
Especially, HDSP users, please test and report whether it works, since the hdsploader was modified to load the files dynamically.
Quoted 5 lines
mmap'ed sound with the cs46xx driver seems to be broken, every other half second the sound is muted. Non-mmap'ed sound plays normally. This is under 2.6.0-test9-mm5. The version included in test9-mm5 works as expected (there was some patches in mm5 against ALSA, but applying those to 1.0.0pre3 made no difference for this particular problem).
there is no big change in cs46xx driver itself, so the change is either in kernel core or in the config.
do you use CONFIG_SND_CS46XX_NEW_DSP ?
Takashi
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/
Quoted 25 lines · Takashi Iwai
At Wed, 26 Nov 2003 01:11:07 +0100,
Quoted 17 lines · Ronny V. Vindenes
Quoted 4 lines · Takashi Iwai
Hi,
right now the ALSA 1.0.0pre3 packages are released.
Quoted 10 lines
In this version, alsa-tools package was divided to two several ones, alsa-tools and alsa-firmware. The latter contains only the firmware binary files required by loader programs in alsa-tools package. Please test them if you have a board requiring the loader (hdsp, mixart, vx, usx2y).
Especially, HDSP users, please test and report whether it works, since the hdsploader was modified to load the files dynamically.
Quoted 5 lines
mmap'ed sound with the cs46xx driver seems to be broken, every other half second the sound is muted. Non-mmap'ed sound plays normally. This is under 2.6.0-test9-mm5. The version included in test9-mm5 works as expected (there was some patches in mm5 against ALSA, but applying those to 1.0.0pre3 made no difference for this particular problem).
Quoted 3 lines
there is no big change in cs46xx driver itself, so the change is either in kernel core or in the config.
do you useCONFIG_SND_CS46XX_NEW_DSP?
Yes.
I've tested it with 2.6.0-test10 too now, and I've narrowed it down a
bit: native alsa mmap'ed or not works, but oss emulation only works correctly when not using mmap.
Things like wine, quake3, Enemy Territory all sound awful. Plain 2.6.0-test10 works fine in all cases.
Signature · 9 lines
Ronny V. Vindenes <[email protected]> ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/
At Wed, 26 Nov 2003 13:10:11 +0100,
Quoted 31 lines · Ronny V. Vindenes
Quoted 25 lines · Takashi Iwai
At Wed, 26 Nov 2003 01:11:07 +0100,
Quoted 17 lines · Ronny V. Vindenes
Quoted 4 lines · Takashi Iwai
Hi,
right now the ALSA 1.0.0pre3 packages are released.
Quoted 10 lines
In this version, alsa-tools package was divided to two several ones, alsa-tools and alsa-firmware. The latter contains only the firmware binary files required by loader programs in alsa-tools package. Please test them if you have a board requiring the loader (hdsp, mixart, vx, usx2y).
Especially, HDSP users, please test and report whether it works, since the hdsploader was modified to load the files dynamically.
Quoted 5 lines
mmap'ed sound with the cs46xx driver seems to be broken, every other half second the sound is muted. Non-mmap'ed sound plays normally. This is under 2.6.0-test9-mm5. The version included in test9-mm5 works as expected (there was some patches in mm5 against ALSA, but applying those to 1.0.0pre3 made no difference for this particular problem).
Quoted 3 lines
there is no big change in cs46xx driver itself, so the change is either in kernel core or in the config.
do you useCONFIG_SND_CS46XX_NEW_DSP?
Quoted 8 lines
Yes.
I've tested it with 2.6.0-test10 too now, and I've narrowed it down a
bit: native alsa mmap'ed or not works, but oss emulation only works correctly when not using mmap.Things like wine, quake3, Enemy Territory all sound awful. Plain 2.6.0-test10 works fine in all cases.
to be sure, try to set direct mode for oss-emulation via writing to the proc file. see alsa-kernel/Documentation/OSS-Emulation.txt.
also, please check /proc/asound/card0/pcm0p/sub0/* files in both cases.
Takashi
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/
Quoted 39 lines · Takashi Iwai
At Wed, 26 Nov 2003 13:10:11 +0100,
Quoted 37 lines · Ronny V. Vindenes
Quoted 25 lines · Takashi Iwai
At Wed, 26 Nov 2003 01:11:07 +0100,
Quoted 17 lines · Ronny V. Vindenes
Quoted 4 lines · Takashi Iwai
Hi,
right now the ALSA 1.0.0pre3 packages are released.
Quoted 10 lines
In this version, alsa-tools package was divided to two several ones, alsa-tools and alsa-firmware. The latter contains only the firmware binary files required by loader programs in alsa-tools package. Please test them if you have a board requiring the loader (hdsp, mixart, vx, usx2y).
Especially, HDSP users, please test and report whether it works, since the hdsploader was modified to load the files dynamically.
Quoted 5 lines
mmap'ed sound with the cs46xx driver seems to be broken, every other half second the sound is muted. Non-mmap'ed sound plays normally. This is under 2.6.0-test9-mm5. The version included in test9-mm5 works as expected (there was some patches in mm5 against ALSA, but applying those to 1.0.0pre3 made no difference for this particular problem).
Quoted 3 lines
there is no big change in cs46xx driver itself, so the change is either in kernel core or in the config.
do you useCONFIG_SND_CS46XX_NEW_DSP?Yes.
I've tested it with 2.6.0-test10 too now, and I've narrowed it down a
bit: native alsa mmap'ed or not works, but oss emulation only works correctly when not using mmap.
Quoted 5 lines
Quoted 2 lines
Things like wine, quake3, Enemy Territory all sound awful. Plain 2.6.0-test10 works fine in all cases.
to be sure, try to set direct mode for oss-emulation via writing to the proc file. see
alsa-kernel/Documentation/OSS-Emulation.txt.
Setting direct mode made no difference.
Quoted 3 lines
also, please check
/proc/asound/card0/pcm0p/sub0/*files in both cases.
I've attached cat /proc/asound/card0/pcm0p/sub0/* for both cases
Signature · 1 line
Ronny V. Vindenes <[email protected]>
access: MMAP_INTERLEAVED
format: S16_LE
subformat: STD
channels: 2
rate: 22050 (22050/1)period_size: 512buffer_size: 16384tick_time: 1000
OSS format: S16_LE
OSS channels: 2
OSS rate: 22050
OSS period bytes: 2048
OSS periods: 32
card: 0
device: 0
subdevice: 0
stream: PLAYBACK
id: CS46xx
name: CS46xx
subname: subdevice #0
class: 0
subclass: 0subdevices_count: 31subdevices_avail: 30
64
state: RUNNINGtrigger_time: 1069855349.000085703
tstamp : 1069855357.000765834
delay : 15968
avail : 416avail_max : 32912
-----hw_ptr : 191392appl_ptr : 207360tstamp_mode: NONEperiod_step: 1sleep_min: 0avail_min: 1xfer_align: 1start_threshold: 1stop_threshold: 1073741824silence_threshold: 528silence_size: 528
boundary: 1073741824
access: RW_INTERLEAVED
format: S16_LE
subformat: STD
channels: 2
rate: 44100 (44100/1)period_size: 512buffer_size: 16384tick_time: 1000
OSS format: S16_LE
OSS channels: 2
OSS rate: 44100
OSS period bytes: 2048
OSS periods: 32
card: 0
device: 0
subdevice: 0
stream: PLAYBACK
id: CS46xx
name: CS46xx
subname: subdevice #0
class: 0
subclass: 0subdevices_count: 31subdevices_avail: 30
64
state: RUNNINGtrigger_time: 1069855565.000290916
tstamp : 1069855577.000743808
delay : 9392
avail : 6992avail_max : 15872
-----hw_ptr : 549200appl_ptr : 558592tstamp_mode: NONEperiod_step: 1sleep_min: 0avail_min: 1xfer_align: 1start_threshold: 1stop_threshold: 16384silence_threshold: 528silence_size: 528
boundary: 1073741824
At Wed, 26 Nov 2003 15:10:06 +0100,
Quoted 47 lines · Ronny V. Vindenes
Quoted 39 lines · Takashi Iwai
At Wed, 26 Nov 2003 13:10:11 +0100,
Quoted 37 lines · Ronny V. Vindenes
Quoted 25 lines · Takashi Iwai
At Wed, 26 Nov 2003 01:11:07 +0100,
Quoted 17 lines · Ronny V. Vindenes
Quoted 4 lines · Takashi Iwai
Hi,
right now the ALSA 1.0.0pre3 packages are released.
Quoted 10 lines
In this version, alsa-tools package was divided to two several ones, alsa-tools and alsa-firmware. The latter contains only the firmware binary files required by loader programs in alsa-tools package. Please test them if you have a board requiring the loader (hdsp, mixart, vx, usx2y).
Especially, HDSP users, please test and report whether it works, since the hdsploader was modified to load the files dynamically.
Quoted 5 lines
mmap'ed sound with the cs46xx driver seems to be broken, every other half second the sound is muted. Non-mmap'ed sound plays normally. This is under 2.6.0-test9-mm5. The version included in test9-mm5 works as expected (there was some patches in mm5 against ALSA, but applying those to 1.0.0pre3 made no difference for this particular problem).
Quoted 3 lines
there is no big change in cs46xx driver itself, so the change is either in kernel core or in the config.
do you useCONFIG_SND_CS46XX_NEW_DSP?Yes.
I've tested it with 2.6.0-test10 too now, and I've narrowed it down a
bit: native alsa mmap'ed or not works, but oss emulation only works correctly when not using mmap.Quoted 5 lines
Quoted 2 lines
Things like wine, quake3, Enemy Territory all sound awful. Plain 2.6.0-test10 works fine in all cases.
to be sure, try to set direct mode for oss-emulation via writing to the proc file. see
alsa-kernel/Documentation/OSS-Emulation.txt.
Quoted 7 lines
Setting direct mode made no difference.
Quoted 3 lines
also, please check
/proc/asound/card0/pcm0p/sub0/*files in both cases.I've attached cat
/proc/asound/card0/pcm0p/sub0/*for both cases
sorry, i meant the ALSA 1.0.0pre3 and the 2.6.0-test10 (oss-emu with mmap). it's known that the mmap support of this chip is not perfect. but i still suspect that the base oss-emu code change affected this.
Takashi
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/
Quoted 55 lines · Takashi Iwai
At Wed, 26 Nov 2003 15:10:06 +0100,
Quoted 53 lines · Ronny V. Vindenes
Quoted 39 lines · Takashi Iwai
At Wed, 26 Nov 2003 13:10:11 +0100,
Quoted 37 lines · Ronny V. Vindenes
Quoted 25 lines · Takashi Iwai
At Wed, 26 Nov 2003 01:11:07 +0100,
Quoted 17 lines · Ronny V. Vindenes
Quoted 4 lines · Takashi Iwai
Hi,
right now the ALSA 1.0.0pre3 packages are released.
Quoted 10 lines
In this version, alsa-tools package was divided to two several ones, alsa-tools and alsa-firmware. The latter contains only the firmware binary files required by loader programs in alsa-tools package. Please test them if you have a board requiring the loader (hdsp, mixart, vx, usx2y).
Especially, HDSP users, please test and report whether it works, since the hdsploader was modified to load the files dynamically.
Quoted 5 lines
mmap'ed sound with the cs46xx driver seems to be broken, every other half second the sound is muted. Non-mmap'ed sound plays normally. This is under 2.6.0-test9-mm5. The version included in test9-mm5 works as expected (there was some patches in mm5 against ALSA, but applying those to 1.0.0pre3 made no difference for this particular problem).
Quoted 3 lines
there is no big change in cs46xx driver itself, so the change is either in kernel core or in the config.
do you useCONFIG_SND_CS46XX_NEW_DSP?Yes.
I've tested it with 2.6.0-test10 too now, and I've narrowed it down a
bit: native alsa mmap'ed or not works, but oss emulation only works correctly when not using mmap.Quoted 5 lines
Quoted 2 lines
Things like wine, quake3, Enemy Territory all sound awful. Plain 2.6.0-test10 works fine in all cases.
to be sure, try to set direct mode for oss-emulation via writing to the proc file. see
alsa-kernel/Documentation/OSS-Emulation.txt.Setting direct mode made no difference.
Quoted 3 lines
also, please check
/proc/asound/card0/pcm0p/sub0/*files in both cases.
Quoted 9 lines
Quoted 1 line
I've attached cat
/proc/asound/card0/pcm0p/sub0/*for both casessorry, i meant the ALSA 1.0.0pre3 and the 2.6.0-test10 (oss-emu with mmap). it's known that the mmap support of this chip is not perfect. but i still suspect that the base oss-emu code change affected this.
Takashi
ok, here's from plain test10
Signature · 1 line
Ronny V. Vindenes <[email protected]>
access: MMAP_INTERLEAVED
format: S16_LE
subformat: STD
channels: 2
rate: 22050 (22050/1)period_size: 512buffer_size: 16384tick_time: 1000
OSS format: S16_LE
OSS channels: 2
OSS rate: 22050
OSS period bytes: 2048
OSS periods: 32
card: 0
device: 0
subdevice: 0
stream: PLAYBACK
id: CS46xx
name: CS46xx
subname: subdevice #0
class: 0
subclass: 0subdevices_count: 31subdevices_avail: 30
64
state: RUNNINGtrigger_time: 1069856885.000853207
tstamp : 1069856889.000718741
delay : 16144
avail : 240avail_max : 33200
-----hw_ptr : 85232appl_ptr : 101376tstamp_mode: NONEperiod_step: 1sleep_min: 0avail_min: 512xfer_align: 1start_threshold: 1stop_threshold: 1073741824silence_threshold: 528silence_size: 528
boundary: 1073741824
Quoted 35 lines · Takashi Iwai
Hi,
right now the ALSA 1.0.0pre3 packages are released.
In this version, alsa-tools package was divided to two several ones, alsa-tools and alsa-firmware. The latter contains only the firmware binary files required by loader programs in alsa-tools package. Please test them if you have a board requiring the loader (hdsp, mixart, vx, usx2y).
Especially, HDSP users, please test and report whether it works, since the hdsploader was modified to load the files dynamically.
Changes
- usb-audio driver supports async unlinking.
On 2.6 kernels, it's enabled as default, but on older kenrels, it's disabled to avoid a serious usb-uhci bug. If you have another controller, please try the module option async_unlink=1.- hdsp driver update (including H9652 bugfixes).
- support of more Tascam USxxx devices.
- Audiotrak Prodigy bugfixes.
- fixed noise on vx222 with 24bit mode.
- complation fixes on alsa-drivers.
The 2.2 kernel is still not tested well. If you can test it, please let us know.- fixed CM8738-MC6 5.1 alias.
Quoted 7 lines
- alsaconf fix for RH, Fedora and Mandrake.
- hdsp* tools updates. compilation fixes.
--
Takashi Iwai <[email protected]> ALSA Developer - www.alsa-project.org
Takashi it seems that at least for hdsploader (I didn't check the other tools) you forgot the trailing / in DATAPATH in Makefile.am, so the program fails to find the firmware file :
Unable to open file '/usr/local/share/alsa/firmware/hdsploadermultiface_firmware.bin' for reading
Thomas
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/
At Wed, 26 Nov 2003 17:38:04 +0100,
Quoted 45 lines · Thomas Charbonnel
Quoted 35 lines · Takashi Iwai
Hi,
right now the ALSA 1.0.0pre3 packages are released.
In this version, alsa-tools package was divided to two several ones, alsa-tools and alsa-firmware. The latter contains only the firmware binary files required by loader programs in alsa-tools package. Please test them if you have a board requiring the loader (hdsp, mixart, vx, usx2y).
Especially, HDSP users, please test and report whether it works, since the hdsploader was modified to load the files dynamically.
Changes
- usb-audio driver supports async unlinking.
On 2.6 kernels, it's enabled as default, but on older kenrels, it's disabled to avoid a serious usb-uhci bug. If you have another controller, please try the module option async_unlink=1.- hdsp driver update (including H9652 bugfixes).
- support of more Tascam USxxx devices.
- Audiotrak Prodigy bugfixes.
- fixed noise on vx222 with 24bit mode.
- complation fixes on alsa-drivers.
The 2.2 kernel is still not tested well. If you can test it, please let us know.- fixed CM8738-MC6 5.1 alias.
Quoted 7 lines
- alsaconf fix for RH, Fedora and Mandrake.
- hdsp* tools updates. compilation fixes.
--
Takashi Iwai <[email protected]> ALSA Developer - www.alsa-project.org
Quoted 6 lines
Takashi it seems that at least for hdsploader (I didn't check the other tools) you forgot the trailing / in DATAPATH in Makefile.am, so the program fails to find the firmware file :
Unable to open file '/usr/local/share/alsa/firmware/hdsploadermultiface_firmware.bin' for reading
oh yes, you're right.
is the attached patch ok?
i'll check it in.
Takashi
Index: alsa-tools/hdsploader/hdsploader.c
===================================================================
RCS file: /suse/tiwai/cvs/alsa/alsa-tools/hdsploader/hdsploader.c,v retrieving revision 1.6
hdsploader/hdsploader.c +4 -4
@@ -83,16 +83,16 @@switch (version.io_type) {case Multiface:if (version.firmware_rev ==0xa ) { - err =read_bin_file (code,DATAPATH "multiface_firmware.bin" ); + err =read_bin_file (code,DATAPATH "/multiface_firmware.bin" ); }else { - err =read_bin_file (code,DATAPATH "multiface_firmware_rev11.bin" ); + err =read_bin_file (code,DATAPATH "/multiface_firmware_rev11.bin" ); }break ;case Digiface:if (version.firmware_rev ==0xa ) { - err =read_bin_file (code,DATAPATH "digiface_firmware.bin" ); + err =read_bin_file (code,DATAPATH "/digiface_firmware.bin" ); }else { - err =read_bin_file (code,DATAPATH "digiface_firmware_rev11.bin" ); + err =read_bin_file (code,DATAPATH "/digiface_firmware_rev11.bin" ); }break ;default :
Quoted 8 lines · Takashi Iwai
Quoted 2 lines
Takashi it seems that at least for hdsploader (I didn't check the other tools) you forgot the trailing / in DATAPATH in Makefile.am, so the program fails to find the firmware file :
Unable to open file '/usr/local/share/alsa/firmware/hdsploadermultiface_firmware.bin' for readingoh yes, you're right.
is the attached patch ok?
i'll check it in.
Good for me, thanks.
Please also apply the attached patch to hdspmixer, it fixes some problems with default presets file handling.
Thomas.
src/HDSPMixerWindow.cxx +19 -2
@@ -397,7 +397,13 @@ { FILE *file; if ((file = fopen(file_name, "r")) == NULL) { + int i = 0; fl_alert("Error opening file %s for reading", file_name); + while (cards[i] != NULL) { + restoreDefaults(i++); + } + inputs->buttons->presets->preset_change(1); + return; } for (int speed = 0; speed < 3; ++speed) { for (int card = 0; card < 3; ++card) {
@@ -533,6 +539,7 @@ h9632_an12_submix[2] = 1; num_modes = 3; phones = 0; + break; default: /* should never happen */ return;
@@ -624,8 +631,18 @@ cards[2] = hdsp_card3; current_card = current_preset = 0; prefs = new Fl_Preferences(Fl_Preferences::USER, "thomasATundata.org", "HDSPMixer"); - if (!prefs->get("default_file", file_name_buffer, NULL, FL_PATH_MAX-1)) file_name = NULL; - else file_name = file_name_buffer; + if (!prefs->get("default_file", file_name_buffer, NULL, FL_PATH_MAX-1)) { + file_name = NULL; + } else { + struct stat buf; + if (!stat(file_name_buffer, &buf)) { + file_name = file_name_buffer; + } else { + file_name = NULL; + prefs->deleteEntry("default_file"); + prefs->flush(); + } + } for (int j = 0; j < 3; ++j) { for (int i = 0; i < 8; ++i) { data[j][0][i] = new HDSPMixerPresetData();
src/HDSPMixerWindow.h +3 -0
@@ -35,6 +35,9 @@#include <stdlib.h> #include <math.h> #include <sys/ioctl.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <unistd.h> #include <alsa/asoundlib.h> #include <sound/hdsp.h> #include "HDSPMixerCard.h"
Takashi Iwai
AppliedAt Thu, 27 Nov 2003 01:46:19 +0100,
Quoted 11 lines · Thomas Charbonnel
Quoted 8 lines · Takashi Iwai
Quoted 6 lines
Takashi it seems that at least for hdsploader (I didn't check the other tools) you forgot the trailing / in DATAPATH in Makefile.am, so the program fails to find the firmware file :
Unable to open file '/usr/local/share/alsa/firmware/hdsploadermultiface_firmware.bin' for reading
Quoted 8 lines
Quoted 4 lines
oh yes, you're right.
is the attached patch ok?
i'll check it in.Good for me, thanks.
Please also apply the attached patch to hdspmixer, it fixes some problems with default presets file handling.
applied.
thanks,
Takashi
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/