Skip to contentSkip to conversation

emu10k1 under kernel 2.6?

DISCUSSION Heinz Ulrich Stille 3 participants 4 messages Dec 2, 2003 – Dec 3, 2003

lore
Share & tools
lore
#0 lore raw

Hi!

I feel I must be missing something obvious, but I just can't get the SB Live to work with a 2.6 kernel. The module snd-emu10k1 depends on snd-ac97-codec, which doesn't load and says:

ALSA sound/pci/ac97/ac97_codec.c:1671: AC'97 0:0 does not respond - RESET
EMU10K1_Audigy: probe of 0000:02:06.0 failed with error -6

It's working just fine with kernel 2.4. What's wrong now?

MfG, Ulrich

Signature · 2 lines
Heinz Ulrich Stille / Tel.: +49-541-9400463 / Fax: +49-541-9400450
design_d gmbh / Lortzingstr. 2 / 49074 Osnabrück / www.design-d.de
#1 lore raw

Quoting Heinz Ulrich Stille <[email protected]>:

Quoted 6 lines

Hi!

I feel I must be missing something obvious, but I just can't get the SB Live to work with a 2.6 kernel. The module snd-emu10k1 depends on snd-ac97-codec, which doesn't load and says:

Quoted 6 lines

ALSA sound/pci/ac97/ac97_codec.c:1671: AC'97 0:0 does not respond - RESET
EMU10K1_Audigy: probe of 0000:02:06.0 failed with error -6

It's working just fine with kernel 2.4. What's wrong now?

MfG, Ulrich

You have to setup your sound drivers in the kernel now (either OSS or ALSA, the latter is preferred). I have my SB Live! working on all of the 2.6 kernels (including the -mm patchsets).

Also, a quick Google search[0] returns at least one page (it shows 10 pages) of usefull information.

-sandalle

[0] Searching for: AC'97 0:0 does not respond

Signature · 17 lines
PGP Key Fingerprint:  FCFF 26A1 BE21 08F4 BB91  FAED 1D7B 7D74 A8EF DD61
http://search.keyserver.net:11371/pks/lookup?op=get&search=0xA8EFDD61

-----BEGIN GEEK CODE BLOCK-----
Version: 3.12
GCS/E/IT$ d-- s++:+>: a-- C++(+++) BL++++VIS>$ P+(++) L+++ E-(---) W++ N+@ o?
K? w++++>-- O M-@ V-- PS+(+++) PE(-) Y++(+) PGP++(+) t+() 5++ X(+) R+(++)
tv(--)b++(+++) DI+@ D++(+++) G>+++ e>+++ h---(++) r++ y+
------END GEEK CODE BLOCK------

Eric Sandall                     |  Source Mage GNU/Linux Developer
[email protected]                  |  http://www.sourcemage.org/
http://eric.sandall.us/          |  SysAdmin @ Inst. Shock Physics @ WSU
http://counter.li.org/  #196285  |  http://www.shock.wsu.edu/

----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
#2 lore raw
Quoted 3 lines · Eric Sandall

Quoting Heinz Ulrich Stille <[email protected]>:

Quoted 2 lines

ALSA sound/pci/ac97/ac97_codec.c:1671: AC'97 0:0 does not respond - RESET
EMU10K1_Audigy: probe of 0000:02:06.0 failed with error -6

[...]

Quoted 3 lines

You have to setup your sound drivers in the kernel now (either OSS or ALSA, the latter is preferred). I have my SB Live! working on all of the 2.6 kernels (including the -mm patchsets).

I'm using ALSA in 2.4 as well as in 2.6, but where can I find a setup?

Quoted 2 lines

Also, a quick Google search[0] returns at least one page (it shows 10 pages) of usefull information.

Hm, looks like I tried the wrong set of words. Even now I did not find anything definitive, but I got the impression that IRQ sharing does not work anymore (I never checked that - I've got exactly two cards on my board, graphics and sound and guess what - I seem to have picked the one PCI slot that shares it's IRQ with AGP...).
Could that really be the problem? It does work with 2.4.

Btw, the system is SMP, a Tyan Tiger MPX with two Athlon XPs.

MfG, Ulrich

Signature · 2 lines
Heinz Ulrich Stille / Tel.: +49-541-9400463 / Fax: +49-541-9400450
design_d gmbh / Lortzingstr. 2 / 49074 Osnabrück / www.design-d.de
#3 lore raw
Quoted 14 lines · Heinz Ulrich Stille
Quoted 3 lines · Eric Sandall

Quoting Heinz Ulrich Stille <[email protected]>:

Quoted 2 lines

ALSA sound/pci/ac97/ac97_codec.c:1671: AC'97 0:0 does not respond - RESET
EMU10K1_Audigy: probe of 0000:02:06.0 failed with error -6

[...]

Quoted 3 lines

You have to setup your sound drivers in the kernel now (either OSS or ALSA, the latter is preferred). I have my SB Live! working on all of the 2.6 kernels (including the -mm patchsets).

I'm using ALSA in 2.4 as well as in 2.6, but where can I find a setup?

Quoted 2 lines

Also, a quick Google search[0] returns at least one page (it shows 10 pages) of usefull information.

Quoted 8 lines

Hm, looks like I tried the wrong set of words. Even now I did not find anything definitive, but I got the impression that IRQ sharing does not work anymore (I never checked that - I've got exactly two cards on my board, graphics and sound and guess what - I seem to have picked the one PCI slot that shares it's IRQ with AGP...).
Could that really be the problem? It does work with 2.4.

Btw, the system is SMP, a Tyan Tiger MPX with two Athlon XPs.

I have a tyan tiger MP with two Athlon MPs, and my emu10k1 does not work with ALSA on 2.4. I haven't looked into it closely, as I don't really use sound on this box, but maybe it's a SMP thing? Probably not the right list for this, but it's a datapoint.

Signature · 1 line
Daniel Gryniewicz <[email protected]>