Skip to contentSkip to conversation

Mainboard on which X86_UP_IOAPIC works? (mine crashes hard)

DISCUSSION Shawn 3 participants 5 messages Dec 16, 2003

lore
Share & tools
lore

Shawn

author
#0 lore raw

I'm looking to replace my mainboard, and need some help.

I've got a Biostar M7VIB KT266 MB (w/ up-to-date BIOS), and my system crashes reliably when UP-IO-APIC is enabled. In order to run linux at all I have to disable it in the BIOS settings.

So... I'd like to find a board where people are currently running UP-IOAPIC and don't get "APIC error on CPU[0]..." yadda errors preceding a nice solid crash.

Anyone?

#1 lore raw
Quoted 3 lines · Shawn

So... I'd like to find a board where people are currently running UP-IOAPIC and don't get "APIC error on CPU[0]..." yadda errors preceding a nice solid crash.

Abit KV7 works great for me with -test11.

author
#2 lore raw

Would you postulate that since the KV7 is a KT600, that the Asus A7V600 would also be "ok"? I ask because my local parts hole has the Asus and not the Abit...

Anyone here use either of the following and run X86_UP-IOAPIC?

	Asus A7V600
	Gigabyte 7VT600-L
Quoted 13 lines · Kevin P. Fleming
Quoted 3 lines · Shawn

So... I'd like to find a board where people are currently running UP-IOAPIC and don't get "APIC error on CPU[0]..." yadda errors preceding a nice solid crash.

Abit KV7 works great for me with -test11.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#3 lore raw
Quoted 3 lines · Shawn

Would you postulate that since the KV7 is a KT600, that the Asus A7V600 would also be "ok"? I ask because my local parts hole has the Asus and not the Abit...

I'd gamble and say probably yes, since the hardware is pretty much the same. I know that the BIOS can have some impact on this, though.

#4 lore raw
Quoted 6 lines · Kevin P. Fleming
Quoted 3 lines

Would you postulate that since the KV7 is a KT600, that the Asus A7V600 would also be "ok"? I ask because my local parts hole has the Asus and not the Abit...

I'd gamble and say probably yes, since the hardware is pretty much the same. I know that the BIOS can have some impact on this, though.

Since the reported APIC errors are a result of a bad design of inter-APIC
wiring, chances are the same chips may work just fine on one board and do not work on another one. Even routing of traces on the PCB is important.

Signature · 3 lines
+  Maciej W. Rozycki, Technical University of Gdansk, Poland   +
+--------------------------------------------------------------+
+        e-mail: [email protected], PGP key available        +