Skip to contentSkip to conversation

2.6.0 lockup with de4x5/de2104x driver

DISCUSSION Thomas Zehetbauer 2 participants 3 messages Dec 22, 2003 – Mar 22, 2004

lore
Share & tools
lore
#0 lore raw

Hi there,

I'm successfully using a "Digital Equipment Corporation DECchip 21041 [Tulip Pass 3] (rev 11)" with the de4x5 driver under 2.4.23.

Using the same driver the system does however lock up within milliseconds after bringing up the network interface in 2.6.0.

The de2104x driver primarily seems to fail receiving packets, running tcpdump I do only see arp-who-has packets beeing transmitted, after some time I do also get a 'eth0: timeout expired stopping DMA, kernel bug at drivers/net/tulip/de2104x.c:413!'

Regards
Tom

PS: I'm using a dual Celeron/Abit BP6

Signature · 5 lines
  T h o m a s   Z e h e t b a u e r   ( TZ251 )
  PGP encrypted mail preferred - KeyID 96FFCB89
       mail [email protected]

Everybody wants to go to heaven, but nobody wants to die.
#1 lore raw

Some more testing revealed that the de4x5 driver of the 2.6.0 kernel seems to be working with SMP disabled. Unfortunately this required a new kernel build instead of simply passing the nosmp parameter.

Regards
Tom

Signature · 5 lines
  T h o m a s   Z e h e t b a u e r   ( TZ251 )
  PGP encrypted mail preferred - KeyID 96FFCB89
       mail [email protected]

History has shown that the people who make history do not learn from it.
#2 lore raw
In reply to Thomas Zehetbauer
Quoted 4 lines · Thomas Zehetbauer

The de2104x driver primarily seems to fail receiving packets, running tcpdump I do only see arp-who-has packets beeing transmitted, after some time I do also get a 'eth0: timeout expired stopping DMA, kernel bug at drivers/net/tulip/de2104x.c:413!'

Does 2.6.5-rc2's de2104x driver work for you?

Jeff