Skip to contentSkip to conversation

package/qt5enginio: needs ssl

PATCH Superseded Fabrice Fontaine 3 participants 8 messages Mar 9, 2019 – Apr 29, 2019

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 package/qt5enginio: needs ssl

Remove select on BR2_PACKAGE_QT5BASE and BR2_PACKAGE_OPENSSL to avoid a circular dependency

Fixes:
- http://autobuild.buildroot.org/results/60678cab68ec9aa17184b8417b64b3b79adf428a

---
 package/qt5/qt5enginio/Config.in | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
package/qt5/qt5enginio/Config.in +1 -2
index 102058e7c5..cce0f2a1cb 100644
@@ -1,7 +1,6 @@
 config BR2_PACKAGE_QT5ENGINIO
 	bool "qt5enginio"
-	select BR2_PACKAGE_OPENSSL
-	select BR2_PACKAGE_QT5BASE
+	depends on BR2_PACKAGE_QT5BASE_OPENSSL
 	select BR2_PACKAGE_QT5BASE_GUI
 	select BR2_PACKAGE_QT5BASE_NETWORK
 	help
Signature · 1 line
2.20.1
#1 lore raw

PATCH 1/1 package/qt5enginio: needs ssl

Hello Fabrice,

Quoted 2 lines · On Sat, 9 Mar 2019 23:29:53 +0100 Fabrice Fontaine…

Remove select on BR2_PACKAGE_QT5BASE and BR2_PACKAGE_OPENSSL to avoid a circular dependency

I don't really understand where the "circular dependency" is.

To me it seems like the problem is rather:

"""
Qt 5.6 SSL support is no longer available with OpenSSL since the bump of OpenSSL to 1.1.x. Therefore selecting Qt5 and OpenSSL does not guarantee that qt5base will be built with SSL support. Due to this, the build of qt5enginio currently fails on Qt 5.6.
"""

package/qt5/qt5enginio/Config.in line 3

Quoted 10 lines
package/qt5/qt5enginio/Config.in +1 -2
index 102058e7c5..cce0f2a1cb 100644
@@ -1,7 +1,6 @@
 config BR2_PACKAGE_QT5ENGINIO
 	bool "qt5enginio"
-	select BR2_PACKAGE_OPENSSL
-	select BR2_PACKAGE_QT5BASE
+	depends on BR2_PACKAGE_QT5BASE_OPENSSL

Either we do this, or:

select BR2_PACKAGE_OPENSSL if BR2_PACKAGE_QT5_VERSION_LATEST select BR2_PACKAGE_LIBRESSL if BR2_PACKAGE_QT5_VERSION_5_6

Best regards,

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#2 lore raw

PATCH 1/1 package/qt5enginio: needs ssl

Hello Thomas,
Le mar. 12 mars 2019 ? 23:29, Thomas Petazzoni
<[email protected]> a ?crit :

Quoted 33 lines

Hello Fabrice,

Quoted 2 lines · On Sat, 9 Mar 2019 23:29:53 +0100 Fabrice Fontaine…

Remove select on BR2_PACKAGE_QT5BASE and BR2_PACKAGE_OPENSSL to avoid a circular dependency

I don't really understand where the "circular dependency" is.

To me it seems like the problem is rather:

"""
Qt 5.6 SSL support is no longer available with OpenSSL since the bump of OpenSSL to 1.1.x. Therefore selecting Qt5 and OpenSSL does not guarantee that qt5base will be built with SSL support. Due to this, the build of qt5enginio currently fails on Qt 5.6.
"""

package/qt5/qt5enginio/Config.in line 3

Quoted 10 lines
package/qt5/qt5enginio/Config.in +1 -2
index 102058e7c5..cce0f2a1cb 100644
@@ -1,7 +1,6 @@
 config BR2_PACKAGE_QT5ENGINIO
      bool "qt5enginio"
-     select BR2_PACKAGE_OPENSSL
-     select BR2_PACKAGE_QT5BASE
+     depends on BR2_PACKAGE_QT5BASE_OPENSSL

Either we do this, or:

Quoted 2 lines

select BR2_PACKAGE_OPENSSL if BR2_PACKAGE_QT5_VERSION_LATEST select BR2_PACKAGE_LIBRESSL if BR2_PACKAGE_QT5_VERSION_5_6

I tried this, but I assume that I must add the dependencies of libressl if QT 5.6 is true, for example like this:

depends on !BR2_PACKAGE_QT5_VERSION_5_6 || \
                (BR2_PACKAGE_QT5_VERSION_5_6 && \
                (!BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL && \
                !(BR2_TOOLCHAIN_USES_UCLIBC && !BR2_USE_MMU)))

But then, this creates the following circular dependency:

package/sqlcipher/Config.in:1:error: recursive dependency detected! package/sqlcipher/Config.in:1: symbol BR2_PACKAGE_SQLCIPHER depends on BR2_PACKAGE_SQLITE
package/sqlite/Config.in:1: symbol BR2_PACKAGE_SQLITE is selected by BR2_PACKAGE_QT5BASE_SQLITE_SYSTEM package/qt5/qt5base/Config.in:104: symbol BR2_PACKAGE_QT5BASE_SQLITE_SYSTEM is part of choice <choice> package/qt5/qt5base/Config.in:88: choice <choice> contains symbol <choice> package/qt5/qt5base/Config.in:88: choice <choice> contains symbol BR2_PACKAGE_QT5BASE
package/qt5/qt5base/Config.in:1: symbol BR2_PACKAGE_QT5BASE is selected by BR2_PACKAGE_QT5ENGINIO package/qt5/qt5enginio/Config.in:1: symbol BR2_PACKAGE_QT5ENGINIO depends on BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL package/openssl/Config.in:1: symbol BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL is selected by BR2_PACKAGE_SQLCIPHER

Did I made a mistake? Shouldn't we add the libressl dependencies?

Quoted 8 lines

Best regards,

Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Best Regards,

Fabrice

#3 lore raw

PATCH 1/1 package/qt5enginio: needs ssl

Quoted 66 lines · Fabrice Fontaine

Hello Thomas,
Le mar. 12 mars 2019 ? 23:29, Thomas Petazzoni
<[email protected]> a ?crit :

Quoted 33 lines

Hello Fabrice,

Quoted 2 lines · On Sat, 9 Mar 2019 23:29:53 +0100 Fabrice Fontaine…

Remove select on BR2_PACKAGE_QT5BASE and BR2_PACKAGE_OPENSSL to avoid a circular dependency

I don't really understand where the "circular dependency" is.

To me it seems like the problem is rather:

"""
Qt 5.6 SSL support is no longer available with OpenSSL since the bump of OpenSSL to 1.1.x. Therefore selecting Qt5 and OpenSSL does not guarantee that qt5base will be built with SSL support. Due to this, the build of qt5enginio currently fails on Qt 5.6.
"""

package/qt5/qt5enginio/Config.in line 3

Quoted 10 lines
package/qt5/qt5enginio/Config.in +1 -2
index 102058e7c5..cce0f2a1cb 100644
@@ -1,7 +1,6 @@
 config BR2_PACKAGE_QT5ENGINIO
      bool "qt5enginio"
-     select BR2_PACKAGE_OPENSSL
-     select BR2_PACKAGE_QT5BASE
+     depends on BR2_PACKAGE_QT5BASE_OPENSSL

Either we do this, or:

Quoted 2 lines

select BR2_PACKAGE_OPENSSL if BR2_PACKAGE_QT5_VERSION_LATEST select BR2_PACKAGE_LIBRESSL if BR2_PACKAGE_QT5_VERSION_5_6

I tried this, but I assume that I must add the dependencies of libressl if QT 5.6 is true, for example like this:

depends on !BR2_PACKAGE_QT5_VERSION_5_6 || \
                (BR2_PACKAGE_QT5_VERSION_5_6 && \
                (!BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL && \
                !(BR2_TOOLCHAIN_USES_UCLIBC && !BR2_USE_MMU)))

But then, this creates the following circular dependency:

package/sqlcipher/Config.in:1:error: recursive dependency detected! package/sqlcipher/Config.in:1: symbol BR2_PACKAGE_SQLCIPHER depends on BR2_PACKAGE_SQLITE
package/sqlite/Config.in:1: symbol BR2_PACKAGE_SQLITE is selected by BR2_PACKAGE_QT5BASE_SQLITE_SYSTEM package/qt5/qt5base/Config.in:104: symbol BR2_PACKAGE_QT5BASE_SQLITE_SYSTEM is part of choice <choice> package/qt5/qt5base/Config.in:88: choice <choice> contains symbol <choice> package/qt5/qt5base/Config.in:88: choice <choice> contains symbol BR2_PACKAGE_QT5BASE
package/qt5/qt5base/Config.in:1: symbol BR2_PACKAGE_QT5BASE is selected by BR2_PACKAGE_QT5ENGINIO package/qt5/qt5enginio/Config.in:1: symbol BR2_PACKAGE_QT5ENGINIO depends on BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL package/openssl/Config.in:1: symbol BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL is selected by BR2_PACKAGE_SQLCIPHER

Quoted 1 line

Did I made a mistake? Shouldn't we add the libressl dependencies?

Whaa, kconfig...

How about just depending on QT5_LATEST || BR2_PACKAGE_QT5BASE_OPENSSL? Or does
that also give a circular dependency?

Regards,
Arnout

Quoted 16 lines
Quoted 8 lines

Best regards,

Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Best Regards,

Fabrice
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

#4 lore raw

PATCH 1/1 package/qt5enginio: needs ssl

Dear Arnout,

Le mar. 26 mars 2019 ? 23:52, Arnout Vandecappelle <[email protected]> a ?crit :

Quoted 70 lines · Fabrice Fontaine
Quoted 66 lines

Hello Thomas,
Le mar. 12 mars 2019 ? 23:29, Thomas Petazzoni
<[email protected]> a ?crit :

Quoted 33 lines

Hello Fabrice,

Quoted 2 lines · On Sat, 9 Mar 2019 23:29:53 +0100 Fabrice Fontaine…

Remove select on BR2_PACKAGE_QT5BASE and BR2_PACKAGE_OPENSSL to avoid a circular dependency

I don't really understand where the "circular dependency" is.

To me it seems like the problem is rather:

"""
Qt 5.6 SSL support is no longer available with OpenSSL since the bump of OpenSSL to 1.1.x. Therefore selecting Qt5 and OpenSSL does not guarantee that qt5base will be built with SSL support. Due to this, the build of qt5enginio currently fails on Qt 5.6.
"""

package/qt5/qt5enginio/Config.in line 3

Quoted 10 lines
package/qt5/qt5enginio/Config.in +1 -2
index 102058e7c5..cce0f2a1cb 100644
@@ -1,7 +1,6 @@
 config BR2_PACKAGE_QT5ENGINIO
      bool "qt5enginio"
-     select BR2_PACKAGE_OPENSSL
-     select BR2_PACKAGE_QT5BASE
+     depends on BR2_PACKAGE_QT5BASE_OPENSSL

Either we do this, or:

Quoted 2 lines

select BR2_PACKAGE_OPENSSL if BR2_PACKAGE_QT5_VERSION_LATEST select BR2_PACKAGE_LIBRESSL if BR2_PACKAGE_QT5_VERSION_5_6

I tried this, but I assume that I must add the dependencies of libressl if QT 5.6 is true, for example like this:

depends on !BR2_PACKAGE_QT5_VERSION_5_6 || \
                (BR2_PACKAGE_QT5_VERSION_5_6 && \
                (!BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL && \
                !(BR2_TOOLCHAIN_USES_UCLIBC && !BR2_USE_MMU)))

But then, this creates the following circular dependency:

package/sqlcipher/Config.in:1:error: recursive dependency detected! package/sqlcipher/Config.in:1: symbol BR2_PACKAGE_SQLCIPHER depends on BR2_PACKAGE_SQLITE
package/sqlite/Config.in:1: symbol BR2_PACKAGE_SQLITE is selected by BR2_PACKAGE_QT5BASE_SQLITE_SYSTEM package/qt5/qt5base/Config.in:104: symbol BR2_PACKAGE_QT5BASE_SQLITE_SYSTEM is part of choice <choice> package/qt5/qt5base/Config.in:88: choice <choice> contains symbol <choice> package/qt5/qt5base/Config.in:88: choice <choice> contains symbol BR2_PACKAGE_QT5BASE
package/qt5/qt5base/Config.in:1: symbol BR2_PACKAGE_QT5BASE is selected by BR2_PACKAGE_QT5ENGINIO package/qt5/qt5enginio/Config.in:1: symbol BR2_PACKAGE_QT5ENGINIO depends on BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL package/openssl/Config.in:1: symbol BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL is selected by BR2_PACKAGE_SQLCIPHER

Quoted 6 lines
Quoted 1 line

Did I made a mistake? Shouldn't we add the libressl dependencies?

Whaa, kconfig...

How about just depending on QT5_LATEST || BR2_PACKAGE_QT5BASE_OPENSSL? Or does
that also give a circular dependency?

Yes, adding the select suggested by Thomas and the above dependencies also give a circular dependency.
The issue is that we can't select BR2_PACKAGE_LIBRESSL without adding a circular dependency because of the BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL option that can be selected by any package that can't work with libressl.
Currently, this option is selected by 4 packages: sqlcipher, wpa_supplicant, tpm2-tss and softether.
So until this option is removed (if the above packages can work with libressl), I think my current patch is the only solution.

Quoted 21 lines

Regards,
Arnout

Quoted 16 lines
Quoted 8 lines

Best regards,

Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Best Regards,

Fabrice
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

Best Regards,

Fabrice

#5 lore raw

PATCH 1/1 package/qt5enginio: needs ssl

Quoted 79 lines · Fabrice Fontaine

Dear Arnout,

Le mar. 26 mars 2019 ? 23:52, Arnout Vandecappelle <[email protected]> a ?crit :

Quoted 70 lines · Fabrice Fontaine
Quoted 66 lines

Hello Thomas,
Le mar. 12 mars 2019 ? 23:29, Thomas Petazzoni
<[email protected]> a ?crit :

Quoted 33 lines

Hello Fabrice,

Quoted 2 lines · On Sat, 9 Mar 2019 23:29:53 +0100 Fabrice Fontaine…

Remove select on BR2_PACKAGE_QT5BASE and BR2_PACKAGE_OPENSSL to avoid a circular dependency

I don't really understand where the "circular dependency" is.

To me it seems like the problem is rather:

"""
Qt 5.6 SSL support is no longer available with OpenSSL since the bump of OpenSSL to 1.1.x. Therefore selecting Qt5 and OpenSSL does not guarantee that qt5base will be built with SSL support. Due to this, the build of qt5enginio currently fails on Qt 5.6.
"""

package/qt5/qt5enginio/Config.in line 3

Quoted 10 lines
package/qt5/qt5enginio/Config.in +1 -2
index 102058e7c5..cce0f2a1cb 100644
@@ -1,7 +1,6 @@
 config BR2_PACKAGE_QT5ENGINIO
      bool "qt5enginio"
-     select BR2_PACKAGE_OPENSSL
-     select BR2_PACKAGE_QT5BASE
+     depends on BR2_PACKAGE_QT5BASE_OPENSSL

Either we do this, or:

Quoted 2 lines

select BR2_PACKAGE_OPENSSL if BR2_PACKAGE_QT5_VERSION_LATEST select BR2_PACKAGE_LIBRESSL if BR2_PACKAGE_QT5_VERSION_5_6

I tried this, but I assume that I must add the dependencies of libressl if QT 5.6 is true, for example like this:

depends on !BR2_PACKAGE_QT5_VERSION_5_6 || \
                (BR2_PACKAGE_QT5_VERSION_5_6 && \
                (!BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL && \
                !(BR2_TOOLCHAIN_USES_UCLIBC && !BR2_USE_MMU)))

But then, this creates the following circular dependency:

package/sqlcipher/Config.in:1:error: recursive dependency detected! package/sqlcipher/Config.in:1: symbol BR2_PACKAGE_SQLCIPHER depends on BR2_PACKAGE_SQLITE
package/sqlite/Config.in:1: symbol BR2_PACKAGE_SQLITE is selected by BR2_PACKAGE_QT5BASE_SQLITE_SYSTEM package/qt5/qt5base/Config.in:104: symbol BR2_PACKAGE_QT5BASE_SQLITE_SYSTEM is part of choice <choice> package/qt5/qt5base/Config.in:88: choice <choice> contains symbol <choice> package/qt5/qt5base/Config.in:88: choice <choice> contains symbol BR2_PACKAGE_QT5BASE
package/qt5/qt5base/Config.in:1: symbol BR2_PACKAGE_QT5BASE is selected by BR2_PACKAGE_QT5ENGINIO package/qt5/qt5enginio/Config.in:1: symbol BR2_PACKAGE_QT5ENGINIO depends on BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL package/openssl/Config.in:1: symbol BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL is selected by BR2_PACKAGE_SQLCIPHER

Quoted 6 lines
Quoted 1 line

Did I made a mistake? Shouldn't we add the libressl dependencies?

Whaa, kconfig...

How about just depending on QT5_LATEST || BR2_PACKAGE_QT5BASE_OPENSSL? Or does
that also give a circular dependency?

Quoted 10 lines

Yes, adding the select suggested by Thomas and the above dependencies also give a circular dependency.
The issue is that we can't select BR2_PACKAGE_LIBRESSL without adding a circular dependency because of the BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL option that can be selected by any package that can't work with libressl.
Currently, this option is selected by 4 packages: sqlcipher, wpa_supplicant, tpm2-tss and softether.
So until this option is removed (if the above packages can work with libressl), I think my current patch is the only solution.

I think I got it to work like this:

# This is a hack to avoid circular dependencies when selecting OPENSSL config BR2_PACKAGE_QT5ENGINIO_SELECT_OPENSSL
bool
default y if BR2_PACKAGE_QT5ENGINIO
select BR2_PACKAGE_OPENSSL

config BR2_PACKAGE_QT5ENGINIO

	bool "qt5enginio"
	depends on !BR2_PACKAGE_QT5_VERSION_5_6 || \
                (BR2_PACKAGE_QT5_VERSION_5_6 && \
                (!BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL && \
                !(BR2_TOOLCHAIN_USES_UCLIBC && !BR2_USE_MMU)))
	select BR2_PACKAGE_QT5BASE_GUI
	select BR2_PACKAGE_QT5BASE_NETWORK

Could you give that a go?

Regards,
Arnout

#6 lore raw

PATCH 1/1 package/qt5enginio: needs ssl

Hello Arnout,

Le dim. 28 avr. 2019 ? 00:33, Arnout Vandecappelle <[email protected]> a ?crit :

Quoted 112 lines · Fabrice Fontaine
Quoted 79 lines

Dear Arnout,

Le mar. 26 mars 2019 ? 23:52, Arnout Vandecappelle <[email protected]> a ?crit :

Quoted 70 lines · Fabrice Fontaine
Quoted 66 lines

Hello Thomas,
Le mar. 12 mars 2019 ? 23:29, Thomas Petazzoni
<[email protected]> a ?crit :

Quoted 33 lines

Hello Fabrice,

Quoted 2 lines · On Sat, 9 Mar 2019 23:29:53 +0100 Fabrice Fontaine…

Remove select on BR2_PACKAGE_QT5BASE and BR2_PACKAGE_OPENSSL to avoid a circular dependency

I don't really understand where the "circular dependency" is.

To me it seems like the problem is rather:

"""
Qt 5.6 SSL support is no longer available with OpenSSL since the bump of OpenSSL to 1.1.x. Therefore selecting Qt5 and OpenSSL does not guarantee that qt5base will be built with SSL support. Due to this, the build of qt5enginio currently fails on Qt 5.6.
"""

package/qt5/qt5enginio/Config.in line 3

Quoted 10 lines
package/qt5/qt5enginio/Config.in +1 -2
index 102058e7c5..cce0f2a1cb 100644
@@ -1,7 +1,6 @@
 config BR2_PACKAGE_QT5ENGINIO
      bool "qt5enginio"
-     select BR2_PACKAGE_OPENSSL
-     select BR2_PACKAGE_QT5BASE
+     depends on BR2_PACKAGE_QT5BASE_OPENSSL

Either we do this, or:

Quoted 2 lines

select BR2_PACKAGE_OPENSSL if BR2_PACKAGE_QT5_VERSION_LATEST select BR2_PACKAGE_LIBRESSL if BR2_PACKAGE_QT5_VERSION_5_6

I tried this, but I assume that I must add the dependencies of libressl if QT 5.6 is true, for example like this:

depends on !BR2_PACKAGE_QT5_VERSION_5_6 || \
                (BR2_PACKAGE_QT5_VERSION_5_6 && \
                (!BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL && \
                !(BR2_TOOLCHAIN_USES_UCLIBC && !BR2_USE_MMU)))

But then, this creates the following circular dependency:

package/sqlcipher/Config.in:1:error: recursive dependency detected! package/sqlcipher/Config.in:1: symbol BR2_PACKAGE_SQLCIPHER depends on BR2_PACKAGE_SQLITE
package/sqlite/Config.in:1: symbol BR2_PACKAGE_SQLITE is selected by BR2_PACKAGE_QT5BASE_SQLITE_SYSTEM package/qt5/qt5base/Config.in:104: symbol BR2_PACKAGE_QT5BASE_SQLITE_SYSTEM is part of choice <choice> package/qt5/qt5base/Config.in:88: choice <choice> contains symbol <choice> package/qt5/qt5base/Config.in:88: choice <choice> contains symbol BR2_PACKAGE_QT5BASE
package/qt5/qt5base/Config.in:1: symbol BR2_PACKAGE_QT5BASE is selected by BR2_PACKAGE_QT5ENGINIO package/qt5/qt5enginio/Config.in:1: symbol BR2_PACKAGE_QT5ENGINIO depends on BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL package/openssl/Config.in:1: symbol BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL is selected by BR2_PACKAGE_SQLCIPHER

Quoted 6 lines
Quoted 1 line

Did I made a mistake? Shouldn't we add the libressl dependencies?

Whaa, kconfig...

How about just depending on QT5_LATEST || BR2_PACKAGE_QT5BASE_OPENSSL? Or does
that also give a circular dependency?

Quoted 10 lines

Yes, adding the select suggested by Thomas and the above dependencies also give a circular dependency.
The issue is that we can't select BR2_PACKAGE_LIBRESSL without adding a circular dependency because of the BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL option that can be selected by any package that can't work with libressl.
Currently, this option is selected by 4 packages: sqlcipher, wpa_supplicant, tpm2-tss and softether.
So until this option is removed (if the above packages can work with libressl), I think my current patch is the only solution.

I think I got it to work like this:

# This is a hack to avoid circular dependencies when selecting OPENSSL config BR2_PACKAGE_QT5ENGINIO_SELECT_OPENSSL
bool
default y if BR2_PACKAGE_QT5ENGINIO
select BR2_PACKAGE_OPENSSL

config BR2_PACKAGE_QT5ENGINIO

        bool "qt5enginio"
        depends on !BR2_PACKAGE_QT5_VERSION_5_6 || \
                (BR2_PACKAGE_QT5_VERSION_5_6 && \
                (!BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL && \
                !(BR2_TOOLCHAIN_USES_UCLIBC && !BR2_USE_MMU)))
        select BR2_PACKAGE_QT5BASE_GUI
        select BR2_PACKAGE_QT5BASE_NETWORK
Quoted 1 line

Could you give that a go?

It works :-). Should I sent a new version of my patch or do you prefer to send it as this your solution?

Quoted 3 lines

Regards,
Arnout

Best Regards,

Fabrice

#7 lore raw

PATCH 1/1 package/qt5enginio: needs ssl

Quoted 2 lines · Fabrice Fontaine

It works :-). Should I sent a new version of my patch or do you prefer to send it as this your solution?

Better if you send it. The comment update is still to do, and that is
complicated as well, so I will not get around to it.

Regards,
Arnout