Skip to contentSkip to conversation

sbLive! -Drive digital IOs exchanged?

DISCUSSION Eckhard Jokisch 3 participants 4 messages Dec 24, 2003 – Jan 6, 2004

lore
Share & tools
lore
#0 lore raw

Hello guys,
I just noticed that the controls ( or their names) of the digital inputs of Live!-drive are changed. If I want ot get sound out of the coaxial inputs I have to raise the optocal s "sliders" in alsamixer as well as in alsermixergui.

Merry Xmas to all of you

Eckhard Jokisch

-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click

#1 lore raw

At Wed, 24 Dec 2003 22:20:57 +0100,

Quoted 6 lines · Eckhard Jokisch

Hello guys,
I just noticed that the controls ( or their names) of the digital inputs of Live!-drive are changed. If I want ot get sound out of the coaxial inputs I have to raise the optocal s "sliders" in alsamixer as well as in alsermixergui.

i don't see any changes of codes regarding this...
is only the capture switch swapped?
(to be sure, do you mean "IEC958 Optical Capture" and "IEC958 Coax Capture", right?)

Takashi

-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click

#2 lore raw
Quoted 9 lines · Takashi Iwai

At Wed, 24 Dec 2003 22:20:57 +0100,

Quoted 6 lines · Eckhard Jokisch

Hello guys,
I just noticed that the controls ( or their names) of the digital inputs of Live!-drive are changed. If I want ot get sound out of the coaxial inputs I have to raise the optocal s "sliders" in alsamixer as well as in alsermixergui.

Quoted 8 lines

i don't see any changes of codes regarding this...
is only the capture switch swapped?
(to be sure, do you mean "IEC958 Optical Capture" and "IEC958 Coax Capture", right?)

Takashi

Recently the I/O's of the Hammerfall Light also changed:

Old

playback_1-8 -> ADAT1
playback_9_16 -> ADAT2
playback_17-18 -> spdif (I suppose)

Now

playback_3-10 -> ADAT1
playback_11-18 -> ADAT2
playback_1-2 -> spdif (I suppose)

-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click

#3 lore raw
In reply to Takashi Iwai

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 10 lines · Takashi Iwai

At Wed, 24 Dec 2003 22:20:57 +0100,

Quoted 5 lines · Eckhard Jokisch

Hello guys,
I just noticed that the controls ( or their names) of the digital inputs of Live!-drive are changed. If I want ot get sound out of the coaxial inputs I have to raise the optocal s "sliders" in alsamixer as well as in alsermixergui.

i don't see any changes of codes regarding this...

Hrrgl ... I knew the word "changed" will cause problems ;-) I mean *swapped*.

Quoted 1 line

is only the capture switch swapped?

No - it's like that:
I connct my TC-electronics"M5000" with acoaxial cable to the front panel's "Digital In" (that's S/PDIF right?). To hear something I have to lift up the fader for "IEC958 Optical". I didn't try yet the capture. And I remeber that I had to lift "IEC958 Coaxial" fader when I once was recording something via optical interface. If I had to use "IEC958coaxial capture" I don't remeber. But as things tend to be easy I think the capture faders are swapped as well. Actually I will get back my equipment this afternoon so I can test this again.

As I tok a short look in the code there seems to be an enum responsible for the ordering of the names. Surely I could repair this piece of code but wnted to be sure that's not only me having this problem.

Quoted 2 lines

(to be sure, do you mean "IEC958 Optical Capture" and "IEC958 Coax Capture", right?)

For completeness: No - not just the captures.

Quoted 3 lines

Takashi

Eckhard
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)

iD4DBQE/+pqQiF9FD4kCbGQRAtJSAJ9CWhzTHUGjNXq80m1OgRl3dxZ9pQCXezeZ /sJ+4PVd6t1o/scexAvJ7A==
=GLgP
-----END PGP SIGNATURE-----

-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id78&alloc_id371&op=click