No sound with alsa and intel8x0 on Intel ICH5R
Hi
I have a Gigabyte GA-8IK1100 motherboard with an onboard ICH5R chip and the AC97 CODEC. With ALSA I get no sound at all and with OSS I get sound but at wrong frequency (playing too slow).
I haved tried alsa with gentoo kernel 2.6.1 and 2.6.1-r1 and also with 2.6.1-mm3 from kernel.org.
When trying to compile alsa-drivers separately it complains about linux/arch/x86 not existing (and it doesn't). This was after resolving issues with PDE not detected OK by ./configure.
thanks
/joel
parts of output from dmesg:
***************************
ICH5: IDE controller at PCI slot 0000:00:1f.1
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later intel8x0_measure_ac97_clock: measured 25120 usecs
intel8x0: clocking to 48000
ALSA sound/pci/intel8x0.c:2695: joystick(s) found
ALSA sound/core/pcm_lib.c:224: Unexpected hw_pointer value [2] (stream = 0, delta: -16, max jitter = 4352): wrong interrupt acknowledge?
/var/log/messages after "alsasound restart":
*******************************************
Jan 15 13:35:18 p4 PCI: Setting latency timer of device 0000:00:1f.5 to 64 Jan 15 13:35:18 p4 intel8x0_measure_ac97_clock: measured 37636 usecs Jan 15 13:35:18 p4 intel8x0: clocking to 48000 Jan 15 13:35:18 p4 ALSA sound/pci/intel8x0.c:2695: joystick(s) found
aplay -v:
*********
p4 root # aplay -v /usr/share/sounds/startup3.wav
Playing WAVE '/usr/share/sounds/startup3.wav' : Signed 16 bit Little Endian, Rat e 44100 Hz, Stereo
Plug PCM: Rate conversion PCM (48000, sformat=S16_LE)
Its setup is:
stream : PLAYBACK
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
rate : 44100
exact rate : 44100 (44100/1)
msbits : 16buffer_size : 11025period_size : 5512period_time : 125000tick_time : 1000tstamp_mode : NONEperiod_step : 1sleep_min : 0avail_min : 5512xfer_align : 5512start_threshold : 11024stop_threshold : 11025silence_threshold: 0silence_size : 0
boundary : 1445068800
Slave: Hardware PCM card 0 'Intel ICH5' device 0 subdevice 0
Its setup is:
stream : PLAYBACK
access : MMAP_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
rate : 48000
exact rate : 48000 (48000/1)
msbits : 16buffer_size : 12000period_size : 6000period_time : 125000tick_time : 1000tstamp_mode : NONEperiod_step : 1sleep_min : 0avail_min : 6000xfer_align : 6000start_threshold : 12000stop_threshold : 12000silence_threshold: 0silence_size : 0
boundary : 1572864000
when running mplayer on /dev/dvd using OSS:
*******************************************
--
Opening audio decoder: [liba52] AC3 decoding with liba52 Using SSE optimized IMDCT transform
AC3: 2.0 (stereo) 48000 Hz 192.0 kbit/s
Using MMX optimized resampler
AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 24000->192000 (192.0 kbit) Selected audio codec: [a52] afm:liba52 (AC3-liba52)
==========================================================================
Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed intAF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 4013Hz 2ch Signed 16-bit (Little-Endian) (2 bps) Building audio filter chain for 48000Hz/2ch/16bit -> 4013Hz/2ch/16bit... [resample] The output sample frequency must be between 8kHz and 192kHz. Current value is 4013
Couldn't find matching filter / ao format!
-------------------------------------------------------
This SF.net email is sponsored by: Perforce Software. Perforce is the Fast Software Configuration Management System offering advanced branching capabilities and atomic changes on 50+ platforms. Free Eval! http://www.perforce.com/perforce/loadprog.html
Quoted 2 lines · Joel Metelius
I have a Gigabyte GA-8IK1100 motherboard with an onboard ICH5R chip and the AC97 CODEC.
What codec? (see first line of /proc/asound/card0/codec97#0/ac97#0-0)
Quoted 2 lines
With ALSA I get no sound at all and with OSS I get sound but at wrong frequency (playing too slow).
ALSA has a bug in connection with ALC655/658 codecs. Please try to reconfigure the audio jacks with alsamixer.
Quoted 2 lines
When trying to compile alsa-drivers separately it complains about linux/arch/x86 not existing (and it doesn't).
You need the kernel sources to compile ALSA. See the --with-kernel option of configure.
HTH
Clemens
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn