Control API, help
Hi,
I'm trying to familiarize myself with the Control API (userland programs). I'm somewhat scared about the huge amount of API functions...
I hammered some code together but i'm not very sure if i'm doing it right. If anyone can comment about this concept code, would be nice.
What i intend to do:
1) Gain access to a control with numeric ID "CTRL_HRTF".
2) Read some info (value limits and such).
3) Write 6 (upto 112) integer values into that control.
The commented code (//) are things that i believe are not needed.
void test() {
int i;
snd_kcontrol_t *ctlp;
/* Open the control. Is this really needed ? */
if ((err = snd_ctl_open(&ctlp, "3d_hrtf", SND_CTL_ASYNC)) != 0) {
fprintf (stderr, "3D CTL failed: (%s)\n", snd_strerror (err));
exit(1);
} /* Retrieve some ifno to check if anything is as expected. */ snd_ctl_elem_info_t *info; snd_ctl_card_info_alloca(info)
/* Setup info struct. */
//snd_ctl_elem_info_set_id(info, const snd_ctl_elem_id_t *ptr);
snd_ctl_elem_info_set_numid(info, CTRL_HRTF);
snd_ctl_elem_info_set_interface(info, snd_ctl_elem_iface_t val);
snd_ctl_elem_info_set_device(info, 0);
snd_ctl_elem_info_set_subdevice(info, 2);
//snd_ctl_elem_info_set_name(info, const char *val);
/* Get info field 0. */
snd_ctl_elem_info_set_index(info, 0);
if ((err = snd_ctl_elem_info(ctlp, info)) != 0) {
fprintf (stderr, "3D CTL failed: (%s)\n", snd_strerror (err));
exit(1);
}
snd_ctl_elem_info_free(info);
/* Declare and setup ctl_elem_value struct. */
snd_ctl_elem_value_t *ctl_val;
snd_ctl_elem_value_alloca(ctl_val); //snd_ctl_elem_value_set_id(ctl_val, const snd_ctl_elem_id_t *ptr); snd_ctl_elem_value_set_numid(ctl_val, CTRL_HRTF /* Some const defined
elsewhere. */);
snd_ctl_elem_value_set_interface(ctl_val, SNDRV_CTL_ELEM_IFACE_PCM); snd_ctl_elem_value_set_device(ctl_val, 0); snd_ctl_elem_value_set_subdevice(ctl_val, 2); //snd_ctl_elem_value_set_name(ctl_val, const char *val);
/* Write values. */
for (i=0; i<6; i++) {
snd_ctl_elem_value_set_index(ctl_val, i);
snd_ctl_elem_value_alloca(ctl_val);
snd_ctl_elem_value_set_integer(ctl_val, unsigned int idx, long val);
}
/* Dispatch ctl write to soundcard. */
if ((err = snd_ctl_elem_write(ctlp, &control)) != 0) {
fprintf (stderr, "3D CTL failed: (%s)\n", snd_strerror (err));
exit(1); }
snd_ctl_elem_value_free(ctl_val);
}
Thank you very much.
Signature · 10 lines
Manuel Jander mjander(at)users(dot)sourceforge(dot)net ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn
At Mon, 19 Jan 2004 08:31:01 -0400,
Quoted 15 lines · Manuel Jander
Hi,
I'm trying to familiarize myself with the Control API (userland programs). I'm somewhat scared about the huge amount of API functions...
I hammered some code together but i'm not very sure if i'm doing it right. If anyone can comment about this concept code, would be nice.
What i intend to do:
1) Gain access to a control with numeric ID "
CTRL_HRTF".
2) Read some info (value limits and such).
3) Write 6 (upto 112) integer values into that control.
Quoted 5 lines
The commented code (//) are things that i believe are not needed.
void
test(){
int i;
snd_kcontrol_t*ctlp;
^^^^^^^^^^^^^^
snd_ctl_tQuoted 6 lines
/* Open the control. Is this really needed ? */
if ((err = snd_ctl_open(&ctlp, "3d_hrtf", SND_CTL_ASYNC)) != 0) {
fprintf (stderr, "3D CTL failed: (%s)\n", snd_strerror (err));
exit(1);
}if you open "3d_hrtf", you have to define this in your asoundrc. (i think it's intentional, right?)
Quoted 4 lines
/* Retrieve some ifno to check if anything is as expected. */
snd_ctl_elem_info_t*info;snd_ctl_card_info_alloca(info)
^^^^
elemQuoted 4 lines
/* Setup info struct. */ //snd_ctl_elem_info_set_id(info, const snd_ctl_elem_id_t *ptr); snd_ctl_elem_info_set_numid(info, CTRL_HRTF);
you should use the name/index pair rather than the numid. the number id may be changed e.g. if the driver is modified.
Quoted 3 lines
snd_ctl_elem_info_set_interface(info, snd_ctl_elem_iface_t val); snd_ctl_elem_info_set_device(info, 0); snd_ctl_elem_info_set_subdevice(info, 2);
subdevice 2 ??
Quoted 9 lines
//snd_ctl_elem_info_set_name(info, const char *val);
/* Get info field 0. */
snd_ctl_elem_info_set_index(info, 0);
if ((err = snd_ctl_elem_info(ctlp, info)) != 0) {
fprintf (stderr, "3D CTL failed: (%s)\n", snd_strerror (err));
exit(1);
}
snd_ctl_elem_info_free(info);if you call alloca, you cannot (or don't have to) free it explicitly.
Quoted 12 lines
/* Declare and setup ctl_elem_value struct. */ snd_ctl_elem_value_t *ctl_val; snd_ctl_elem_value_alloca(ctl_val);//snd_ctl_elem_value_set_id(ctl_val, const
snd_ctl_elem_id_t*ptr); snd_ctl_elem_value_set_numid(ctl_val,CTRL_HRTF/* Some const defined
elsewhere. */);
snd_ctl_elem_value_set_interface(ctl_val, SNDRV_CTL_ELEM_IFACE_PCM);snd_ctl_elem_value_set_device(ctl_val, 0);snd_ctl_elem_value_set_subdevice(ctl_val, 2); //snd_ctl_elem_value_set_name(ctl_val, const char *val);
Quoted 4 lines
/* Write values. */
for (i=0; i<6; i++) {
snd_ctl_elem_value_set_index(ctl_val, i);
snd_ctl_elem_value_alloca(ctl_val);allocate twice??
Quoted 1 line
snd_ctl_elem_value_set_integer(ctl_val, unsigned int idx, long val);
the second argument of set_integer is NOT the index of the element itself. it's the array index of that element. (a control element is an array of integer/boolean/etc.)
if you want to set different elements with different indices, call snd_ctl_elem_write() in this loop.
Quoted 7 lines
}
/* Dispatch ctl write to soundcard. */
if ((err = snd_ctl_elem_write(ctlp, &control)) != 0) {
fprintf (stderr, "3D CTL failed: (%s)\n", snd_strerror (err));
exit(1);
}
snd_ctl_elem_value_free(ctl_val);don't free the alloca'ed record.
Quoted 1 line
}
ciao,
Takashi
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn