Nvidia drivers and 2.6.x kernel

Hi. I also have an Nvidia Ti4200, running on Fedora Core with the 2.6.2-rc1 kernel. The easiest way to get the driver installed was to grab a pre-built no-fuss installer from
http://www.sh.nu/download/nvidia/linux-2.6/ and after you build your new kernel, boot into it, kill X and make sure it stays dead by modifying /etc/inittab by changing
respawn:/etc/X11/prefdm -nodaemon
to
# x:5:respawn:/etc/X11/prefdm -nodaemon
(save) and type init q ...if X wasn't dead before, it is now. You should now be able to install the driver (where ever you put it) by just running >sh <drivername>
Assuming your XF86Config is still setup to deal with the binary nVidia driver, when you uncomment the line in the /etc/inittab file and re-run init q, X should start with an nvidia splash screen. Please be aware that there are problems with agpgart on via chipsets (I don't have one, I'm quoting from the minion page). And there is a procedure for getting mesa (and optionally glut) installed alongside the binary nvidia driver (and a bit more if you want tv with overscan).