strange error messages with ide-cd in 2.6.2
Since 2.6.2 I get the following messages every time when I load the ide-cd module:
hdd: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdd: status error: error=0x20LastFailedSense 0x02
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdd: status error: error=0x00
hdd: drive not ready for command
hdd: ATAPI reset complete
.
.
.
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
These error messages repeat ca 10 times
What's wrong there? I didn't get these messages with 2.6.1. My IDE controller is a VIA vt82c686a
Please CC me, I'm not on the list.
Thanks in advance
Julien Langer