aic79xx: are these hardware or software errors?

DISCUSSION Jeffrey W. Baker 1 participant 1 message Feb 10, 2004 SCSI

Share & tools

Jeffrey W. Baker

author

2004-02-10 20:48 UTC #0 lore raw

I believe these indicate problems with our SCSI hardware or bus, and are not problems with the kernel or driver. Correct?

scsi0:0:0:0: Attempting to abort cmd f77e1e00: 0x28 0x0 0x6 0x85 0x29 0x2f 0x0 0x0 0x50 0x0 scsi0:0:0:0: Command not found
scsi0:0:0:0: Attempting to abort cmd f77e2000: 0x28 0x0 0x6 0x85 0x29 0x7f 0x0 0x0 0x10 0x0 scsi0:0:0:0: Command not found
scsi0:0:0:0: Attempting to abort cmd f77e2200: 0x28 0x0 0x6 0x85 0x29 0x8f 0x0 0x0 0x10 0x0 scsi0:0:0:0: Command not found
scsi0:0:0:0: Attempting to abort cmd f77e2400: 0x28 0x0 0x6 0x85 0x29 0x9f 0x0 0x0 0x8 0x0 scsi0:0:0:0: Command not found
scsi0:0:0:0: Attempting to abort cmd f77e2600: 0x28 0x0 0x6 0x85 0x29 0xa7 0x0 0x0 0x20 0x0 scsi0:0:0:0: Command not found

Our SCSI bus currently consists of one Adaptec 39320D PCI-X HBA with one RAID controller attached to it on channel A. Kernel is 2.4.25-rc1 with aic79xx driver 1.3.10. It's a pretty simple setup that we're trying to diagnose.

-jwb