(no subject)
Hi, I would like to add a certain rule to my firewall, but I have a dynamic IP, I'm wondering if there is some way I can work with this the line is as follows:
iptables -A INPUT -p tcp -d <MyDynamicIP> --tcp-flags SYN,FIN SYN,FIN -j DROP
Thanks for any information you can provide.
--tony
Quoted 6 lines · Anthony de Almeida Lopes
Hi, I would like to add a certain rule to my firewall, but I have a dynamic IP, I'm wondering if there is some way I can work with this the line is as follows:
iptables -A INPUT -p tcp -d <MyDynamicIP> --tcp-flags SYN,FIN SYN,FIN -j DROP
OTOMH:
iptables -A INPUT -p tcp -d ip ad sh dev <external interface, like eth1>|grep inet|awk '{print $2}'|cut -d / -f 1 --tcp-flags SYN,FIN SYN,FIN -j DROP
I may be wrong on the "ip" output, You may need to change $2
No, but if you have a dynamic IP on the firewall, you can use the -i <dynamic_ip_network_interface> instead to do the same thing.
Quoted 12 lines · Anthony de Almeida Lopes
Hi, I would like to add a certain rule to my firewall, but I have a dynamic IP, I'm wondering if there is some way I can work with this the line is as follows:
iptables -A INPUT -p tcp -d <MyDynamicIP> --tcp-flags SYN,FIN SYN,FIN -j DROP
Thanks for any information you can provide.
--tony
A fast way to do this is with a script and something like this (could be a lot of other options and ways to do this)
MY_IP=ifconfig eth0 | grep "inet addr" | cut -d':' -f2 | cut -d' ' -f1
and then
iptables -A INPUT -p tcp -d $MY_IP --tcp-flags SYN,FIN SYN,FIN -j DROP
of course, you need to change eth0 to the interface that you need to obtain an ip address.
If this interface is related to an ppp interface it could be easy, in a file called ip-up in /etc/ppp you could set your script with the following vars
# When the ppp link comes up, this script is called with the following
# parameters # $1 the interface name used by pppd (e.g. ppp3) # $2 the tty device name # $3 the tty device speed # $4 the local IP address for the interface # $5 the remote IP address # $6 the parameter specified by the 'ipparam' option to pppd
pppd executes this script when it comes up
so you can use $1 where i put $MY_IP in the iptables command.
then, if you need to change some parameters when the ppp connection cames down, just set it in ip-down
and thats it
Hello Anthony,
Saturday, February 21, 2004, 9:46:59 AM, you wrote:
AdAL> Hi, I would like to add a certain rule to my firewall, but I have a AdAL> dynamic IP, I'm wondering if there is some way I can work with this AdAL> the line is as follows:
AdAL> iptables -A INPUT -p tcp -d <MyDynamicIP> --tcp-flags SYN,FIN SYN,FIN -j AdAL> DROP
AdAL> Thanks for any information you can provide.
AdAL> --tony
Signature · 2 lines
Best regards, Alexis mailto:[email protected]
How about a faster way to do that, that is static to any interface that pops up, "iptables -A INPUT -i ! lo --tcp-flags SYN,FIN SYN,FIN -j DROP" that will protect every interface that is not lo(Loop Back).
Quoted 60 lines · On Sat, 21 Feb 2004 19:49:22 -0300 Alexis <[email protected]> wrote:
A fast way to do this is with a script and something like this (could be a lot of other options and ways to do this)
MY_IP=
ifconfig eth0 | grep "inet addr" | cut -d':' -f2 | cut -d' ' -f1and then
iptables -A INPUT -p tcp -d $MY_IP --tcp-flags SYN,FIN SYN,FIN -j DROPof course, you need to change eth0 to the interface that you need to obtain an ip address.
If this interface is related to an ppp interface it could be easy, in a file called ip-up in
/etc/pppyou could set your script with the following vars# When the ppp link comes up, this script is called with the following
# parameters # $1 the interface name used by pppd (e.g. ppp3) # $2 the tty device name # $3 the tty device speed # $4 the local IP address for the interface # $5 the remote IP address # $6 the parameter specified by the 'ipparam' option to pppdpppd executes this script when it comes up
so you can use $1 where i put $MY_IP in the iptables command.
then, if you need to change some parameters when the ppp connection cames down, just set it in ip-down
and thats it
Hello Anthony,
Saturday, February 21, 2004, 9:46:59 AM, you wrote:
AdAL> Hi, I would like to add a certain rule to my firewall, but I have a AdAL> dynamic IP, I'm wondering if there is some way I can work with this AdAL> the line is as follows:
AdAL> iptables -A INPUT -p tcp -d <MyDynamicIP> --tcp-flags SYN,FIN SYN,FIN -j AdAL> DROP
AdAL> Thanks for any information you can provide.
AdAL> --tony
Signature · 2 lines
Best regards, Alexis mailto:[email protected]
Signature · 5 lines
This e-mail may be privileged and/or confidential, and the sender does not waive any related rights and obligations. Any distribution, use or copying of this e-mail or the information it contains by other than an intended recipient is unauthorized. If you received this e-mail in error, please advise me (by return e-mail or otherwise) immediately.
Thanks, that's also a good idea. I'll try that too :)
Quoted 67 lines · On Sat, 2004-02-21 at 19:23, c0ldbyte wrote:
How about a faster way to do that, that is static to any interface that pops up, "iptables -A INPUT -i ! lo --tcp-flags SYN,FIN SYN,FIN -j DROP" that will protect every interface that is not lo(Loop Back).
Quoted 60 lines · On Sat, 21 Feb 2004 19:49:22 -0300 Alexis <[email protected]> wrote:
A fast way to do this is with a script and something like this (could be a lot of other options and ways to do this)
MY_IP=
ifconfig eth0 | grep "inet addr" | cut -d':' -f2 | cut -d' ' -f1and then
iptables -A INPUT -p tcp -d $MY_IP --tcp-flags SYN,FIN SYN,FIN -j DROPof course, you need to change eth0 to the interface that you need to obtain an ip address.
If this interface is related to an ppp interface it could be easy, in a file called ip-up in
/etc/pppyou could set your script with the following vars# When the ppp link comes up, this script is called with the following
# parameters # $1 the interface name used by pppd (e.g. ppp3) # $2 the tty device name # $3 the tty device speed # $4 the local IP address for the interface # $5 the remote IP address # $6 the parameter specified by the 'ipparam' option to pppdpppd executes this script when it comes up
so you can use $1 where i put $MY_IP in the iptables command.
then, if you need to change some parameters when the ppp connection cames down, just set it in ip-down
and thats it
Hello Anthony,
Saturday, February 21, 2004, 9:46:59 AM, you wrote:
AdAL> Hi, I would like to add a certain rule to my firewall, but I have a AdAL> dynamic IP, I'm wondering if there is some way I can work with this AdAL> the line is as follows:
AdAL> iptables -A INPUT -p tcp -d <MyDynamicIP> --tcp-flags SYN,FIN SYN,FIN -j AdAL> DROP
AdAL> Thanks for any information you can provide.
AdAL> --tony
Signature · 2 lines
Best regards, Alexis mailto:[email protected]
Signature · 3 lines
--------------------------------------------------------------- Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html