Skip to contentSkip to conversation

Selection of PtP connection type

Bluez-users Pavel Ruzicka 5 participants 9 messages Feb 22, 2004 – Feb 23, 2004 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

Hello,

I want to connect my Desktop Mandrake linux with my Sharp Zaurus. On desktop side I want automatic solution. Only insert USB dongle.

On Zaurus side I have network connector with PPP connection support, (it's works with my Nokia 6310i phone), and with PAN support. I want only click "connect" on Zaurus side.

I read many FAQ, but many of them are outdated or not complete. I know, there are ppp over rfcomm, ppp over bnep, bridge over bnep, or anything else? I'am a little confused about it.

What is the preferred way of connecting two devices today?

----------------------------------------------------------------------
Other problem is with automatic configuring. For autoloading
of kernel modules I have in kernel 2.6.3 autoloader, and in /etc/modprobe.conf I have this:

# bluetooth stuff
alias net-pf-31 bluez
alias bt-proto-0 l2cap
alias bt-proto-2 sco
alias bt-proto-3 rfcomm
alias bt-proto-4 bnep
alias tty-ldisc-11 hci_usb

This works for me, but Is it the right way?

I'am a little confused from hotplug. Must I start some daemon, or this makes kernel?
Where can I place configuration for automatic configuring and removing interface?
This will probably depends on first question about connection type. For example, on my Zaurus is cardctl daemon, which operates CF slot.

Please give me some answers or links to documents. Best regards,
Pavel Ruzicka

-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

#1 lore raw

[Bluez-users] Pairing multiple devices

Hi,

I have several bluetooth devices, which I am having a hard time getting them all connected at the same time.

The problem is that, one device (a Logitech MS 900) doesn't seem to work if I have encryption and authentication enabled.

However my apple wireless keyboard does not work with out those options enabled.

With encryption and authentication on, the mouse does not have a successful pairing. (always failing on the key request)

Is there a way to specify that a specific connect uses (or doesn't use) encryption and authentication?

Alex

maintainer
#2 lore raw

Re: [Bluez-users] Pairing multiple devices

Hi Alex,

Quoted 5 lines

I have several bluetooth devices, which I am having a hard time getting them all connected at the same time.

The problem is that, one device (a Logitech MS 900) doesn't seem to work if I have encryption and authentication enabled.

and this is correct. Read the HID profile for more details.

Quoted 2 lines

However my apple wireless keyboard does not work with out those options enabled.

The Apple mouse is wrong here, because the HID device must not decide this. In the case of HID the host stack must trigger the authentication.

Quoted 2 lines

With encryption and authentication on, the mouse does not have a successful pairing. (always failing on the key request)

With auth and encrypt set in hcid.conf or with hciconfig you enable security mode 3 and this is not what you really want. Disable it and let the device decide when to ask for authentication.

Quoted 2 lines

Is there a way to specify that a specific connect uses (or doesn't use) encryption and authentication?

See above. You are in security mode 3, but what you want is security mode 2.

Regards

Marcel

-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

maintainer
#3 lore raw
In reply to Pavel Ruzicka

Hi Pavel,

Quoted 10 lines

I want to connect my Desktop Mandrake linux with my Sharp Zaurus. On desktop side I want automatic solution. Only insert USB dongle.

On Zaurus side I have network connector with PPP connection support, (it's works with my Nokia 6310i phone), and with PAN support. I want only click "connect" on Zaurus side.

I read many FAQ, but many of them are outdated or not complete. I know, there are ppp over rfcomm, ppp over bnep, bridge over bnep, or anything else? I'am a little confused about it.

there is no PPP over BNEP, because BNEP itself is an ethernet emulation.

Quoted 1 line

What is the preferred way of connecting two devices today?

The preferred way is to use the PAN profile (BNEP).

Quoted 12 lines

----------------------------------------------------------------------
Other problem is with automatic configuring. For autoloading
of kernel modules I have in kernel 2.6.3 autoloader, and in /etc/modprobe.conf I have this:

# bluetooth stuff
alias net-pf-31 bluez
alias bt-proto-0 l2cap
alias bt-proto-2 sco
alias bt-proto-3 rfcomm
alias bt-proto-4 bnep
alias tty-ldisc-11 hci_usb
Quoted 1 line

This works for me, but Is it the right way?

No.

alias net-pf-31 bluetooth (for 2.4 this is bluez)
alias bt-proto-0 l2cap
alias bt-proto-2 sco
alias bt-proto-3 rfcomm
alias bt-proto-4 bnep
alias bt-proto-5 cmtp
alias tty-ldisc-15 hci_uart

Quoted 2 lines

Where can I place configuration for automatic configuring and removing interface?

Start hcid. And you can make use of bluetooth.agent.

Regards

Marcel

-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

#4 lore raw
In reply to Pavel Ruzicka
Quoted 1 line · Pavel Ruzicka

Hello,

Hello.

Quoted 2 lines

I want to connect my Desktop Mandrake linux with my Sharp Zaurus. On desktop side I want automatic solution. Only insert USB dongle.

[snip]

Quoted 1 line

What is the preferred way of connecting two devices today?

In my opinion you should use the PAN Profile to connect the devices. If you don't want to share the internet connection of your mandrake box, you do not need to worry about bridging. As a rough summary:

1) Install bluez-pan on both sides
2) Issue "pand -s -r NAP" on the mandrake box
3) make "pand -c aa:bb:cc:dd:ee:00" on the zaurus (replace the part after -c with the bluetooth address of the mandrake box

And you should be connected. But still read the documentation. And by the way, PPP over BNEP does not make sense.

[snip]

Simi

-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

#5 lore raw

Hello,

Quoted 3 lines

In my opinion you should use the PAN Profile to connect the devices. If you don't want to share the internet connection of your mandrake box, you do not need to worry about bridging. As a rough summary:

Thanks, I now use PAN.

Quoted 1 line

1) Install bluez-pan on both sides

It was done from package...

Quoted 1 line

2) Issue "pand -s -r NAP" on the mandrake box

Yes it works.

Quoted 2 lines

3) make "pand -c aa:bb:cc:dd:ee:00" on the zaurus (replace the part after -c with the bluetooth address of the mandrake box

Yes it works too.

I created /etc/sysconfig/network-scripts/ifcfg-bnep0
-------------------------
DEVICE=bnep0
BOOTPROTO=static
IPADDR=192.168.130.1
NETMASK=255.255.255.0
ONBOOT=no
-------------------------
When I want to connect, I must run on desktop "pand -s -rNAP", next run "connect" on Zaurus, and next "ifup bnep0" on desktop.

How can I automate process on desktop side?
Marcel writes about hcid and bluetooth.agent.
Are there some examples or links to official documentation? Man with examples would be great ;-)

Quoted 1 line

And by the way, PPP over BNEP does not make sense.

This is probably my mistake from this document:
http://www.cs.ucla.edu/~cclljj/work/ucla/bluez/pand_dund.html

Thank you and Marcel for great help.

Best regards,

Pavel Ruzicka

-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

maintainer
#6 lore raw

Hi Pavel,

Quoted 11 lines

I created /etc/sysconfig/network-scripts/ifcfg-bnep0
-------------------------
DEVICE=bnep0
BOOTPROTO=static
IPADDR=192.168.130.1
NETMASK=255.255.255.0
ONBOOT=no
-------------------------
When I want to connect, I must run on desktop "pand -s -rNAP", next run "connect" on Zaurus, and next "ifup bnep0" on desktop.

Quoted 1 line

How can I automate process on desktop side?

you can start pand from an init script. The automatic ifup is specific to your distribution.

Regards

Marcel

-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

#7 lore raw
In reply to Pavel Ruzicka

Hi Pavel,
Check out this page http://my-zaurus.narod.ru/bluetooth.html

I use the network applets: they work well.

Cheers,
Steve

Quoted 51 lines · Pavel Ruzicka

Hello,

I want to connect my Desktop Mandrake linux with my Sharp Zaurus. On desktop side I want automatic solution. Only insert USB dongle.

On Zaurus side I have network connector with PPP connection support, (it's works with my Nokia 6310i phone), and with PAN support. I want only click "connect" on Zaurus side.

I read many FAQ, but many of them are outdated or not complete. I know, there are ppp over rfcomm, ppp over bnep, bridge over bnep, or anything else? I'am a little confused about it.

What is the preferred way of connecting two devices today?

----------------------------------------------------------------------
Other problem is with automatic configuring. For autoloading
of kernel modules I have in kernel 2.6.3 autoloader, and in /etc/modprobe.conf I have this:

# bluetooth stuff
alias net-pf-31 bluez
alias bt-proto-0 l2cap
alias bt-proto-2 sco
alias bt-proto-3 rfcomm
alias bt-proto-4 bnep
alias tty-ldisc-11 hci_usb

This works for me, but Is it the right way?

I'am a little confused from hotplug. Must I start some daemon, or this makes kernel?
Where can I place configuration for automatic configuring and removing interface?
This will probably depends on first question about connection type. For example, on my Zaurus is cardctl daemon, which operates CF slot.

Please give me some answers or links to documents. Best regards,
Pavel Ruzicka

-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Signature · 14 lines
Stephen Crane, Rococo Software Ltd. http://www.rococosoft.com
[email protected] +353-1-6601315 (ext 209)



-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
#8 lore raw

Hello,

Quoted 2 lines

Hi Pavel,
Check out this page http://my-zaurus.narod.ru/bluetooth.html

Thanks,
I am using network applet in Cacko.biz rom on Zaurus side, which works great.

Best regards,

Pavouk

-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users