Skip to contentSkip to conversation

2.6.3 vs. ibm xseries 445 (4 way)

DISCUSSION Max Payne 3 participants 3 messages Feb 23, 2004

lore
Share & tools
lore

Max Payne

author
#0 lore raw

Hi!

Hardware:

ibm xseries 445, 4 way intel pentium xeon 3GHz, 8GB RAM

with SuSE Linux SLES8 (2.4.19-64GB-SMP kernel) everything is OK, i have 4 CPU (reported by "cat /proc/cpuinfo" and "top")

with vanilla 2.6.3 i have only one CPU. Yes, SMP kernel. Any idea?

.config attached

Thanks.

--
Max

#1 lore raw

On Mon, 23 Feb 2004 14:46:54 +0100 (CET) Max Payne <"max..payne"@freemail.hu> wrote:

| Hi!
| 
| Hardware:
| 
| ibm xseries 445, 4 way intel pentium xeon 3GHz, 8GB RAM
| 
| with SuSE Linux SLES8 (2.4.19-64GB-SMP kernel) everything is
| OK, i have 4 CPU (reported by "cat /proc/cpuinfo" and "top") 
| 
| with vanilla 2.6.3 i have only one CPU. Yes, SMP kernel. Any
| idea?
| 
| .config attached

Try changing
CONFIG_NR_CPUS=32
to see if that works.

There have been some issues with CPU number assignments (by BIOS) being rather sparse.

--
~Randy

#2 lore raw
In reply to Max Payne
Quoted 9 lines · Max Payne

Hardware:

ibm xseries 445, 4 way intel pentium xeon 3GHz, 8GB RAM

with SuSE Linux SLES8 (2.4.19-64GB-SMP kernel) everything is OK, i have 4 CPU (reported by "cat /proc/cpuinfo" and "top")

with vanilla 2.6.3 i have only one CPU. Yes, SMP kernel. Any idea?

Under "Processor type and features" make sure "Subarchitecture Type" is set to "Summit/EXA" or "Generic"

Hope that helps, and please let me know if you have any further problems.

thanks
-john