ppc64 iommu rewrite part 4/5

Fix drivers/ide when using an IOMMU

# This is a BitKeeper generated diff -Nru style patch. #
# ChangeSet

#   2004/02/27 22:28:18+11:00 [email protected] 
#   Make IDE advertise only 128 entries of SG table on archs with an IOMMU.
#   The current IOMMU implementations of pci_map_sg() may produce segments
#   that don't match the boundary requirements of IDE, thus causing the
#   driver to break them up. The BIO is supposed to account for that,
#   however, it cannot account for a pci_map_sg producing a segment of
#   the requested size, but with incorrect alignement, thus we may still
#   try to break up the list in more entries than is supported by the HW.
#   A similar fix already went in libata. The "real" long term fix will be
#   to move the boundary requirements to struct device so that pci_map_sg()
#   can respect them when producing the sglist. In the meantime, this
#   band-aid works around the problem.
# 
# drivers/ide/ide-probe.c
#   2004/02/27 22:28:06+11:00 [email protected] +16 -1
#   Make IDE advertise only 128 entries of SG table on archs with an IOMMU.
#   The current IOMMU implementations of pci_map_sg() may produce segments
#   that don't match the boundary requirements of IDE, thus causing the
#   driver to break them up. The BIO is supposed to account for that,
#   however, it cannot account for a pci_map_sg producing a segment of
#   the requested size, but with incorrect alignement, thus we may still
#   try to break up the list in more entries than is supported by the HW.
#   A similar fix already went in libata. The "real" long term fix will be
#   to move the boundary requirements to struct device so that pci_map_sg()
#   can respect them when producing the sglist. In the meantime, this
#   band-aid works around the problem.
# 
diff -Nru a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
--- a/drivers/ide/ide-probe.c	Fri Feb 27 22:44:36 2004
+++ b/drivers/ide/ide-probe.c	Fri Feb 27 22:44:36 2004
@@ -50,6 +50,7 @@
 #include <linux/spinlock.h>
 #include <linux/pci.h>
 #include <linux/kmod.h>
+#include <linux/pci.h>

#include <asm/byteorder.h>
#include <asm/irq.h>
@@ -926,11 +927,25 @@
max_sectors = hwif->rqsize;
blk_queue_max_sectors(q, max_sectors);

- /* IDE DMA can do PRD_ENTRIES number of segments. */
+#if !defined(CONFIG_PCI) || PCI_DMA_BUS_IS_PHYS
+ /* IDE DMA can do PRD_ENTRIES number of segments. */
blk_queue_max_hw_segments(q, PRD_ENTRIES);

/* This is a driver limit and could be eliminated. */ blk_queue_max_phys_segments(q, PRD_ENTRIES);
+#else
+ /* When we have an IOMMU, we may have a problem where pci_map_sg()
+ * creates segments that don't completely match our boundary
+ * requirements and thus need to be broken up again. Because it
+ * doesn't align properly neither, we may actually have to break up
+ * to more segments than what was we got in the first place, a max
+ * worst case is twice as many.
+ * This will be fixed once we teach pci_map_sg() about our boundary
+ * requirements, hopefully soon
+ */
+ blk_queue_max_hw_segments(q, PRD_ENTRIES / 2);
+ blk_queue_max_phys_segments(q, PRD_ENTRIES / 2);
+#endif

/* assign drive and gendisk queue */
drive->queue = q;