Removing USB Bluetooth dongle Oopses 2.6.4
Hello lkml!
Here comes the oops:
PREEMPT
CPU: 0
EIP: 0060:[<e1921149>] Not tainted
EIP is at urb_unlink+0x31/0x8e [usbcore]
eax: c17c069c ebx: 00000000 ecx: 00000000 edx: dec74000
esi: 00000246 edi: c17c0694 ebp: de5aa1f0 esp: dec75e14
ds: 007b es: 007b ss: 0068
Process hotplug (pid: 6150, threadinfo=dec74000 task=dfa6a100)
Stack: c17c0694 de5aa000 dec75edc c17c0694 dec75edc de5aa000 e19218af c17c0694
c17c0694 dec74000 c17c0694 e19f5db4 de5aa000 c17c0694 dec75edc dec75edc
de5aa1d0 de5aa1d0 de5aa000 dec75edc e19f5f72 de5aa000 dec75edc 00701300
Call trace:
[<e19218af>] usb_hcd_giveback_urb+0x1b/0x39 [usbcore]
[<e19f5db4>] uhci_finish_completion+0x61/0x9c [uhci_hcd]
[<e19f5f72>] uhci_irq+0x103/0x165 [uhci_hcd]
[<e1921903>] usb_hcd_irq+0x36/0x67 [usbcore]
[<c010ae8a>] handle_IRQ_event+0x3a/0x64
[<c010b1f7>] do_IRQ+0x94/0x136
[<c0116eea>] do_page_fault+0x0/0x50c
[<c0109750>] common_interrupt+0x18/0x20
[<c0116eea>] do_page_fault+0x0/0x50c
[<c0116f11>] do_page_fault+0x27/0x50c
[<c0141c0b>] unmap_vmas+0xdc/0x212
[<c01451b7>] unmap_vma+0x40/0x7d
[<c0145210>] unmap_vma_list+0x1c/0x28
[<c0145625>] do_munmap+0x146/0x183
[<c0116eea>] do_page_fault+0x0/0x50c
[<c010980d>] error_code+0x2d/0x38
Code: 89 59 04 89 0b 89 40 04 89 47 08 8b 5f 14 56 9d 8b 42 08 83
<0>Kernel panic: Fatal exception in interruptIn interrupt handler - not syncing
Here is the modules list:
Module Size Used by rfcomm 33820 0 l2cap 21124 3 rfcomm hci_usb 9728 1 bluetooth 43108 3 rfcomm,l2cap,hci_usb ide_cd 37636 0 cdrom 35872 1 ide_cd ds 11524 2 hid 23040 0 intel_agp 15772 1 agpgart 25896 1 intel_agp uhci_hcd 29200 0 ehci_hcd 23428 0 snd_intel8x0 28804 0 snd_ac97_codec 58756 1 snd_intel8x0 snd_mpu401_uart 6272 1 snd_intel8x0 snd_rawmidi 20128 1 snd_mpu401_uart snd_seq_oss 31488 0 snd_seq_midi_event 6272 1 snd_seq_oss snd_seq 50192 4 snd_seq_oss,snd_seq_midi_event snd_seq_device 6536 3 snd_rawmidi,snd_seq_oss,snd_seq snd_pcm_oss 48164 0 snd_pcm 84900 2 snd_intel8x0,snd_pcm_oss snd_page_alloc 9348 2 snd_intel8x0,snd_pcm snd_timer 21380 2 snd_seq,snd_pcm snd_mixer_oss 17280 1 snd_pcm_oss snd 45796 12 snd_intel8x0,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_oss,snd_seq_midi_event,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss soundcore 7392 1 snd rtc 10552 0 usbcore 89820 6 hci_usb,hid,uhci_hcd,ehci_hcd md5 3712 1 ipv6 228160 11 fan 4236 0 button 6296 0 thermal 16400 0 processor 24496 1 thermal battery 10636 0 ac 5004 0 e100 29056 0 yenta_socket 14336 0 pcmcia_core 59872 2 ds,yenta_socket unix 23472 12
You'll find the kernel config attached:
Steps to reproduce the problem:
1) Insert the usb bt dongle
2) Start the bluetooth services (rfcomm, hcid...)
3) Stop the bluetooth services
4) Extrach the dongle - Doing rmmod uhci_hcd also causes the same oops.
Notice that SCO BT support is NOT compiled into the kernel, so this is a different oops than similar ones reported before.
After step 3 it is possible to remove rfcomm and l2cap, but hci_usb and bluetooth seem to lock one another, making it impossible to remove them from the running kernel.
Regards,
Silla
Hi Silla,
Quoted 33 lines
Here comes the oops:
PREEMPT
CPU: 0
EIP: 0060:[<e1921149>] Not tainted
EIP is aturb_unlink+0x31/0x8e[usbcore]
eax:c17c069cebx: 00000000 ecx: 00000000 edx:dec74000
esi: 00000246 edi:c17c0694ebp:de5aa1f0esp:dec75e14
ds: 007b es: 007b ss: 0068
Process hotplug (pid: 6150, threadinfo=dec74000 task=dfa6a100)Stack: c17c0694 de5aa000 dec75edc c17c0694 dec75edc de5aa000 e19218af c17c0694 c17c0694 dec74000 c17c0694 e19f5db4 de5aa000 c17c0694 dec75edc dec75edc de5aa1d0 de5aa1d0 de5aa000 dec75edc e19f5f72 de5aa000 dec75edc 00701300 Call trace: [<e19218af>] usb_hcd_giveback_urb+0x1b/0x39 [usbcore] [<e19f5db4>] uhci_finish_completion+0x61/0x9c [uhci_hcd] [<e19f5f72>] uhci_irq+0x103/0x165 [uhci_hcd] [<e1921903>] usb_hcd_irq+0x36/0x67 [usbcore] [<c010ae8a>] handle_IRQ_event+0x3a/0x64 [<c010b1f7>] do_IRQ+0x94/0x136 [<c0116eea>] do_page_fault+0x0/0x50c [<c0109750>] common_interrupt+0x18/0x20 [<c0116eea>] do_page_fault+0x0/0x50c [<c0116f11>] do_page_fault+0x27/0x50c [<c0141c0b>] unmap_vmas+0xdc/0x212 [<c01451b7>] unmap_vma+0x40/0x7d [<c0145210>] unmap_vma_list+0x1c/0x28 [<c0145625>] do_munmap+0x146/0x183 [<c0116eea>] do_page_fault+0x0/0x50c [<c010980d>] error_code+0x2d/0x38 Code: 89 59 04 89 0b 89 40 04 89 47 08 8b 5f 14 56 9d 8b 42 08 83 <0>Kernel panic: Fatal exception in interrupt
Quoted 1 line
In interrupt handler - not syncing
this looks like another unlink-during-submit bug in the uhci-hcd host driver. With the latest 2.6.4-bk2 the ohci-hcd is now free from it and an unplug works again without any oops or freezes. Post your oops to the USB developer mailing list.
Regards
Marcel
Quoted 8 lines
this looks like another unlink-during-submit bug in the uhci-hcd host driver. With the latest 2.6.4-bk2 the ohci-hcd is now free from it and an unplug works again without any oops or freezes. Post your oops to the USB developer mailing list.
Regards
Marcel
I've just tried 2.6.4-bk3 but the oops is still there; I'll forward it to the usb mailing list.
Regards, Silla