platform/x86: acer-wireless: Bind to a platform device instead of an ACPI one
Subsystems (2)
Rafael J. Wysocki
maintainercover platform/x86: acer-wireless: Bind to a platform device instead of an ACPI one
Hi All,
This series is part of a larger effort to switch over all drivers using the struct acpi_driver interface to the more common struct platform_driver interface and eliminate the former. The background is explained in Documentation/driver-api/acpi/acpi-drivers.rst and in the changelog of the patch that introduced the above document:
https://lore.kernel.org/all/[email protected]/
The bottom line is that the kernel would be better off without struct acpi_driver and so it is better to get rid of it.
This series carries out driver conversion of the platform x86 acer-wireless driver.
Patch [1/2] updates the driver to install an ACPI notify handler by itself instead of using the .notify() callback from struct acpi_driver, which is requisite for the driver conversion.
Patch [2/2] converts the driver to using struct platform_driver for device binding.
Thanks!
Rafael J. Wysocki
maintainerPATCH 1/2 platform/x86: acer-wireless: Register ACPI notify handler directly
From: "Rafael J. Wysocki" <[email protected]>
To facilitate subsequent conversion of the driver to a platform one, make it install an ACPI notify handler directly instead of using a .notify() callback in struct acpi_driver.
No intentional functional impact.
--- drivers/platform/x86/acer-wireless.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-)
drivers/platform/x86/acer-wireless.c +16 -3
@@ -18,8 +18,9 @@ static const struct acpi_device_id acer_wireless_acpi_ids[] = { };MODULE_DEVICE_TABLE (acpi, acer_wireless_acpi_ids); -static void acer_wireless_notify (struct acpi_device *adev,u32 event) +static void acer_wireless_notify (acpi_handle handle,u32 event,void *data) { +struct acpi_device *adev = data;struct input_dev *idev =acpi_driver_data (adev);dev_dbg (&adev->dev,"event=%#x\n" , event);
@@ -36,6 +37,7 @@ static void acer_wireless_notify(struct acpi_device *adev, u32 event)static int acer_wireless_add (struct acpi_device *adev) {struct input_dev *idev; +int ret; idev =devm_input_allocate_device (&adev->dev);if (!idev)
@@ -50,7 +52,18 @@ static int acer_wireless_add(struct acpi_device *adev)set_bit (EV_KEY , idev->evbit);set_bit (KEY_RFKILL , idev->keybit); -return input_register_device (idev); + ret =input_register_device (idev); +if (ret) +return ret; + +return acpi_dev_install_notify_handler (adev,ACPI_DEVICE_NOTIFY , + acer_wireless_notify, adev); +} + +static void acer_wireless_remove (struct acpi_device *adev) +{ +acpi_dev_remove_notify_handler (adev,ACPI_DEVICE_NOTIFY , + acer_wireless_notify); }static struct acpi_driver acer_wireless_driver = {
@@ -59,7 +72,7 @@ static struct acpi_driver acer_wireless_driver = { .ids = acer_wireless_acpi_ids, .ops = { .add = acer_wireless_add, - .notify = acer_wireless_notify, + .remove = acer_wireless_remove, }, };module_acpi_driver (acer_wireless_driver);
Signature · 1 line
2.51.0
Rafael J. Wysocki
maintainerPATCH 2/2 platform/x86: acer-wireless: Convert ACPI driver to a platform one
In reply to Rafael J. WysockiFrom: "Rafael J. Wysocki" <[email protected]>
In all cases in which a struct acpi_driver is used for binding a driver to an ACPI device object, a corresponding platform device is created by the ACPI core and that device is regarded as a proper representation of underlying hardware. Accordingly, a struct platform_driver should be used by driver code to bind to that device. There are multiple reasons why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their ACPI companions, so convert the Acer wireless ACPI driver to a platform one.
After this change, the subordinate input device will be registered under the platform device used for driver binding instead of its ACPI companion.
While this is not expected to alter functionality, it changes sysfs layout and so it will be visible to user space.
--- drivers/platform/x86/acer-wireless.c | 41 +++++++++++++++------------- 1 file changed, 22 insertions(+), 19 deletions(-)
drivers/platform/x86/acer-wireless.c +22 -19
@@ -10,6 +10,7 @@#include <linux/kernel.h> #include <linux/module.h> #include <linux/pci_ids.h> +#include <linux/platform_device.h> #include <linux/types.h> static const struct acpi_device_id acer_wireless_acpi_ids[] = {
@@ -20,12 +21,12 @@ MODULE_DEVICE_TABLE(acpi, acer_wireless_acpi_ids);static void acer_wireless_notify (acpi_handle handle,u32 event,void *data) { -struct acpi_device *adev = data; -struct input_dev *idev =acpi_driver_data (adev); +struct device *dev = data; +struct input_dev *idev =dev_get_drvdata (dev); -dev_dbg (&adev->dev,"event=%#x\n" , event); +dev_dbg (dev,"event=%#x\n" , event);if (event !=0x80 ) { -dev_notice (&adev->dev,"Unknown SMKB event: %#x\n" , event); +dev_notice (dev,"Unknown SMKB event: %#x\n" , event);return ; }input_report_key (idev,KEY_RFKILL ,1 );
@@ -34,16 +35,16 @@ static void acer_wireless_notify(acpi_handle handle, u32 event, void *data)input_sync (idev); } -static int acer_wireless_add (struct acpi_device *adev) +static int acer_wireless_probe (struct platform_device *pdev) {struct input_dev *idev;int ret; - idev =devm_input_allocate_device (&adev->dev); + idev =devm_input_allocate_device (&pdev->dev);if (!idev)return -ENOMEM ; - adev->driver_data = idev; +platform_set_drvdata (pdev, idev); idev->name ="Acer Wireless Radio Control" ; idev->phys ="acer-wireless/input0" ; idev->id.bustype =BUS_HOST ;
@@ -56,26 +57,28 @@ static int acer_wireless_add(struct acpi_device *adev)if (ret)return ret; -return acpi_dev_install_notify_handler (adev,ACPI_DEVICE_NOTIFY , - acer_wireless_notify, adev); +return acpi_dev_install_notify_handler (ACPI_COMPANION (&pdev->dev), +ACPI_DEVICE_NOTIFY , + acer_wireless_notify, + &pdev->dev); } -static void acer_wireless_remove (struct acpi_device *adev) +static void acer_wireless_remove (struct platform_device *pdev) { -acpi_dev_remove_notify_handler (adev,ACPI_DEVICE_NOTIFY , +acpi_dev_remove_notify_handler (ACPI_COMPANION (&pdev->dev), +ACPI_DEVICE_NOTIFY , acer_wireless_notify); } -static struct acpi_driver acer_wireless_driver = { - .name ="Acer Wireless Radio Control Driver" , - .class ="hotkey" , - .ids = acer_wireless_acpi_ids, - .ops = { - .add = acer_wireless_add, - .remove = acer_wireless_remove, +static struct platform_driver acer_wireless_driver = { + .probe = acer_wireless_probe, + .remove = acer_wireless_remove, + .driver = { + .name ="Acer Wireless Radio Control Driver" , + .acpi_match_table = acer_wireless_acpi_ids, }, }; -module_acpi_driver (acer_wireless_driver); +module_platform_driver (acer_wireless_driver);MODULE_DESCRIPTION ("Acer Wireless Radio Control Driver" );MODULE_AUTHOR ("Chris Chiu <[email protected]>" );
Signature · 1 line
2.51.0
Ilpo Järvinen
maintainerQuoted 9 lines · Rafael J. Wysocki
This series is part of a larger effort to switch over all drivers using the struct
acpi_driverinterface to the more common structplatform_driverinterface and eliminate the former. The background is explained inDocumentation/driver-api/acpi/acpi-drivers.rstand in the changelog of the patch that introduced the above document:https://lore.kernel.org/all/[email protected]/
[...]
Thank you for your contribution, it has been applied to my local review-ilpo-next branch. Note it will show up in the public platform-drivers-x86/review-ilpo-next branch only once I've pushed my local branch there, which might take a while.
The list of commits applied:
[1/2] platform/x86: acer-wireless: Register ACPI notify handler directly
commit: 6fdc70794cc15b450e3fd750ca048318764a343e
[2/2] platform/x86: acer-wireless: Convert ACPI driver to a platform one
commit: b30a462720ad15613ede9e365938d401ed464095--
i.