Skip to contentSkip to conversation

2.6.x kernels and ttyS45 for 6 serial ports ?

PATCH Ruud Linders 3 participants 4 messages Apr 5, 2004

lore
Share & tools
lore
#0 lore raw

Some time ago I reported that serial ports numbering on 2.5.x/2.6.x was rather weird when used with a 4-serial port PCI card and 2 standard onboard serial ports.
I got devices ttyS0/1/14/15/2/3 or something.

Now checking this on 2.6.5 it got more confusing, I now have with total of 6 serial ports a device number ttyS45 !?

The way this device numbering seems to work is that many device names are reserved in include/asm/serial.h for devices like fourport/boca/hub6. Anything else (=all PCI cards?) gets a number still unassigned.

Note that eg. the SCSI disk equivalent of this strategy would be to reserver eg. sda-sde for IBM disks and other brands start numbering at sdf !

Attached patch 'fixes' this for me, been using it for past 6 months or so.

Regards,
Ruud Linders

__

Dmesg from 2.6.5
================
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS14 at I/O 0xb800 (irq = 21) is a 16550A
ttyS15 at I/O 0xb808 (irq = 21) is a 16550A
ttyS44 at I/O 0xb810 (irq = 21) is a 16550A
ttyS45 at I/O 0xb818 (irq = 21) is a 16550A

Applied this patch on stock 2.6.5
=================================

serial_core.c 2004-04-05 12:32:33.000000000 +0200 renamed from serial_core.c.ORIG 2004-03-19 18:29:20.000000000 +0100 +0 -11
@@ -2306,17 +2306,6 @@
                        return &drv->state[i];
 
        /*
-        * We didn't find a matching entry, so look for the first
-        * free entry.  We look for one which hasn't been previously
-        * used (indicated by zero iobase).
-        */
-       for (i = 0; i < drv->nr; i++)
-               if (drv->state[i].port->type == PORT_UNKNOWN &&
-                   drv->state[i].port->iobase == 0 &&
-                   drv->state[i].count == 0)
-                       return &drv->state[i];
-
-       /*
         * That also failed.  Last resort is to find any currently
         * entry which doesn't have a real port associated with it.
         */

And now I get this more logical numbering
=========================================
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS2 at I/O 0xb800 (irq = 21) is a 16550A
ttyS3 at I/O 0xb808 (irq = 21) is a 16550A
ttyS4 at I/O 0xb810 (irq = 21) is a 16550A
ttyS5 at I/O 0xb818 (irq = 21) is a 16550A

#1 lore raw
Quoted 2 lines · Ruud Linders

Now checking this on 2.6.5 it got more confusing, I now have with total of 6 serial ports a device number ttyS45 !?

And what happens if you detect a PCI modem at IO address 0x2e8 after you've detected your PCI card and assigned it ttyS4?

Don't you think that would complain that their modem should be assigned ttyS4 rather than their PCI multiport card getting it?

Signature · 4 lines
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 PCMCIA      - http://pcmcia.arm.linux.org.uk/
                 2.6 Serial core
#2 lore raw

I realise that my 'patch' isn't the perfect solution. But how much sense makes adding a 4-port card and getting ttyS14/15/44/45 for these 4-ports ?

As the first 4 serial ports, on x86 at least, are more or less on standard 3f8/2f8/3e8/2e8 IO-ports an argument could be made to reserve ttyS0/1/2/3 for these.
Reserving ttyS0-S43 (with ttyS14-15 as spare) doesn't make sense to me.
And what if my next mobo doesn't have serial ports anymore and I plugin a PCI card, I would expect them to start at ttyS0.

Anyway, I just wanted to point out that
a)these are strange numbers from user point of view b)over kernel versions my ports keep moving to different names
and I'm NOT plugging in different hardware.

I guess I'll just do "cd /dev;ln -nfs ttyS14 ttyS2" and be done with it or use udev (good time as ever to give that a try) or keep patching my kernel or ...

_
Ruud

Now my PCI ports are moving between kernel versions

Quoted 12 lines · Russell King
Quoted 2 lines · Ruud Linders

Now checking this on 2.6.5 it got more confusing, I now have with total of 6 serial ports a device number ttyS45 !?

And what happens if you detect a PCI modem at IO address 0x2e8 after you've detected your PCI card and assigned it ttyS4?

Don't you think that would complain that their modem should be assigned ttyS4 rather than their PCI multiport card getting it?

#3 lore raw
Quoted 3 lines · Ruud Linders

I realise that my 'patch' isn't the perfect solution. But how much sense makes adding a 4-port card and getting ttyS14/15/44/45 for these 4-ports ?

does it matter really ????
(and if it does, why aren't you using udev ;)