Skip to contentSkip to conversation

"does not support 28bit PCI busmaster DMA" on AMD64

DISCUSSION Russ Garrett 2 participants 3 messages Apr 29, 2004 – May 8, 2004

lore
Share & tools
lore
#0 lore raw

Just upgraded my system to an Athlon 64 processor, specs are:

Athlon 64 3200+
Gigabyte GA-K8N Pro (nForce3)
M-Audio Audiophile 2496 Sound card (Ice1712)
Linux 2.6.5

Whenever I try to modprobe snd_ice1712, I get the following error in dmesg:

architecture does not support 28bit PCI busmaster DMA
ICE1712: probe of 0000:01:0a.0 failed with error -6

Russ Garrett
[email protected]

-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click

#1 lore raw

At Thu, 29 Apr 2004 19:32:39 +0100,

Quoted 8 lines · Russ Garrett

Just upgraded my system to an Athlon 64 processor, specs are:

Athlon 64 3200+
Gigabyte GA-K8N Pro (nForce3)
M-Audio Audiophile 2496 Sound card (Ice1712)
Linux 2.6.5

Quoted 5 lines

Whenever I try to modprobe snd_ice1712, I get the following error in dmesg:

architecture does not support 28bit PCI busmaster DMA
ICE1712: probe of 0000:01:0a.0 failed with error -6

you can try "soft" boot option.
or, simply ignore the dma address check as the patch attached below :)

Takashi

arch/x86_64/kernel/pci-gart.c renamed from arch/x86_64/kernel/pci-gart.c-dist +0 -3
@@ -606,9 +606,6 @@ int pci_dma_supported(struct pci_dev *de
 		return 0; 
 	}
 
-	if (no_iommu && (mask < (end_pfn << PAGE_SHIFT)) && !swiotlb)
-		return 0;
-
 	return 1;
 } 
 
#2 lore raw
Quoted 10 lines · Takashi Iwai

At Thu, 29 Apr 2004 19:32:39 +0100,

Quoted 5 lines · Russ Garrett

Whenever I try to modprobe snd_ice1712, I get the following error in dmesg:

architecture does not support 28bit PCI busmaster DMA
ICE1712: probe of 0000:01:0a.0 failed with error -6

you can try "soft" boot option.
or, simply ignore the dma address check as the patch attached below :)

Thanks, the patch works fine for me. I don't fully understand what the problem is - is this likely to be fixed in a future version?

--
Russ Garrett
[email protected]

-------------------------------------------------------
This SF.Net email is sponsored by Sleepycat Software
Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO.
http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3