Skip to contentSkip to conversation

psmouse.c - synaptics touchpad driver sync problem

DISCUSSION Thorsten Hirsch 1 participant 1 message May 10, 2004

lore
Share & tools
lore
#0 lore raw

Hi Dmitry,

Quoted 2 lines

Could you please try the patch below - it changes the way we process interrupts from the keyboard controller.

Done. I used 2.6.6-mm1 (your patch succeeded), but there's still the same problem. Well, at least I guess it's the same, because the errors in dmesg are looking different:

Synaptics driver lost sync at byte 1 Synaptics driver lost sync at byte 1 Synaptics driver lost sync at byte 1 Synaptics driver lost sync at byte 1 Synaptics driver lost sync at byte 1 Synaptics driver resynced. Synaptics driver lost sync at byte 4 Synaptics driver lost sync at byte 1 Synaptics driver resynced.
[...]

Quoted 2 lines

Also, in your dmesg, do you see
messages like "psmouse.c: bad data from KBC - timeout"?

No. No timeout at all.
Here's the output of "dmesg | grep serio"...I just thought this might be helpful:

serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
input: SynPS/2 Synaptics TouchPad on isa0060/serio2
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0

Thorsten

P.S.: no need to CC me anymore, as I'm subscribed now to the lkml :-)

Signature · 2 lines
PGP public key:
http://home.arcor.de/thorstenhirsch/thirschatwebde.asc