Skip to contentSkip to conversation

2.6.6-rc3-mm2

DISCUSSION Andrew Morton 34 participants 90 messages May 5, 2004 – May 15, 2004 1 message not in the archive

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.6-rc3/2.6.6-rc3-mm2/

- Lots of little fixes and updates. Nothing really major.

- The huge memory leak from 2.6.6-rc3-mm1 is fixed.

Changes since 2.6.6-rc3-mm2:

linus.patch
bk-acpi.patch
bk-agpgart.patch
bk-alsa.patch
bk-cifs.patch
bk-cpufreq.patch
bk-driver-core.patch
bk-drm.patch
bk-i2c.patch
bk-input.patch
bk-libata.patch
bk-netdev.patch
bk-ntfs.patch
bk-pci.patch
bk-scsi.patch
bk-usb.patch

Latest versions of various development trees

-cifs-build-fix.patch
-nfs-printk-warning-fix.patch -efivars-sysfs-fix.patch -dvbfix-adapter-module-removal-bug.patch -s390-oprofile-config-cleanup.patch -make-ikconfig-quiet.patch -ppc64-shmget-translation-bugfix.patch -aic7xxx-deadlock-fix.patch -aic7xxx-section-fix.patch -string_h-needs-compiler_h.patch -new-set-of-input-patches-synaptics-cleanup.patch -new-set-of-input-patches-synaptics-middle-button-support.patch -new-set-of-input-patches-dont-change-max-proto.patch -new-set-of-input-patches-atkbd-soften-accusation.patch -new-set-of-input-patches-atkbd-trailing-whitespace.patch -new-set-of-input-patches-atkbd-use-bitfields.patch -new-set-of-input-patches-atkbd-timeout-complaints.patch -new-set-of-input-patches-psmouse-rescan-on-hotplug.patch -new-set-of-input-patches-psmouse-reconnect-after-error.patch -new-set-of-input-patches-psmouse-add-protocol_handler.patch -new-set-of-input-patches-psmouse-sliced-commands.patch -new-set-of-input-patches-atkbd-reconnect-probe.patch -new-set-of-input-patches-allow-disabling-psaux.patch -new-set-of-input-patches-serio-whitespace.patch -new-set-of-input-patches-serio-open-close-optional.patch

Merged

+page_mapping-race-fix.patch

Avoid a possible BUG in the rmap code.

+fealnx-bogon-fix.patch

Locking fix

+rmap-9-page_add_anon_rmap-bug-fix.patch

Fix a BUG in the rmap code

+rmap-anonhd-locking-fix.patch

Fix a race in the rmap code

+small-numa-api-fixups.patch

Fixes against the NUMA API

+vm_area_struct-size-comment.patch
+rmapc-comment-style-fixups.patch
+rmap-20-i_mmap_shared-into-i_mmap.patch
+rmap-21-try_to_unmap_one-mapcount.patch
+rmap-22-flush_dcache_mmap_lock.patch
+rmap-23-empty-flush_dcache_mmap_lock.patch

More VM/rmap work

+partial-prefetch-for-vma_prio_tree_next.patch

Might speed up the prio-tree code.

+fix-deadlock-in-journalled-quota-fix.patch

Fix fix-deadlock-in-journalled-quota.patch

+ppc-ppc64-cleanup-ppc970-cpu-initialization.patch +benh-credits-update.patch +ppc32-add-missing-dma_mapping_error.patch

ppc things

-selinux-inode-race-trap.patch

No longer needed

+sched-ppc64-sched-domain-support-fix.patch

Fix sched-ppc64-sched-domain-support.patch

+sched-kthread_stop_race_fix.patch

Fix a race in kthread_stop()

+fixes-in-32-bit-ioctl-emulation-code.patch

fs/compat.c locking fixes

+binfmt_misc-credentials-fixes-2.patch

Fixes against binfmt_misc-credentials.patch

-fix-acer-travelmate-360-interrupt-routing.patch

I was asked to drop this.

+ext3-reservation-bad-inode-fix.patch

ext3 reservation code fix

+autofs-locking-fix.patch
+autofs4-race-fix.patch

Fixes against the autofs4 patches

+ext3-error-handling-fixes.patch

Fix some error-path code in ext3/namei,c

+re-open-descriptors-closed-on-exec-by-selinux-to.patch

SELinux fix

+cyclades-maintainers-update.patch

MAINTAINERS update

+laptop-mode-mutt-noatime-doc-update.patch

Documentation

-bssprot.patch
-bssprot-sparc-fix.patch
-bssprot-cleanup.patch
-bssprot-more-fixes.patch

Dropped. These were causing pain and Wine userspace can work around it. We should fix this though.

+shrink_slab-handle-GFP_NOFS-fix.patch

Fix ghastly VFS cache leak.

+reiserfs-remove-debugging-warning-from-block-allocator.patch

reiserfs tidyup.

+tdfxfbc-warning-fix.patch

Fix warnings in the tdfx driver

ia64-cpuhotplug-core_kernel_init.patch
ia64-cpuhotplug-init_removal.patch
ia64-cpuhotplug-sysfs_ia64.patch
ia64-cpuhotplug-irq_affinity_fix.patch
ia64-cpuhotplug-palinfo.patch

Updated

-ia64-cpuhotplug-hotcpu.patch
-ia64-cpuhotplug-cpu_present_map.patch

Dropped. ia64-cpuhotplug-cpu_present_map.patch interacts fatally with the sched-domains code.

+cmpci-update.patch

Update the cmpci.c OSS driver

+i2o-subsystem-fixing-and-cleanup-for-26-i2o-config-cleanpatch.patch +i2o-subsystem-fixing-and-cleanup-for-26-i2o-passthrupatch.patch +i2o-subsystem-fixing-and-cleanup-for-26-i2o_block-cleanuppatch.patch +i2o-subsystem-fixing-and-cleanup-for-26-i2o-64-bit-fixpatch.patch +i2o-subsystem-fixing-and-cleanup-for-26-i2o-makefile-cleanuppatch.patch

i2o fixes/cleanups

+dentry-and-inode-cache-hash-algorithm-performance-changes.patch

Bettern hashing functions for the dentry and inode caches

+fix-mtd-suspend-resume.patch

PM fix in MTD

+remove-blk_queue_bounce-messages.patch

Kill some printks

+fix-deadlock-in-__create_workqueue-2.patch

Fix a deadlock in the workqueue code

+throttle-p4-thermal-warnings.patch

Less log output.

+i82365c-warning-fix.patch

Fix a warning

+allow-i386-to-reenable-interrupts-on-lock-contention.patch

re-enable interrupts while spinning in spin_lcok_irq() on ia32.

+make-4k-stacks-permanent.patch

Fill my inbox.

+worker_thread-race-fix.patch

Fix wakeup race in the workqueue code.

+force-config_regparm-to-y.patch

Remove the CONFIG_REGPARM option.

+kernel-syscalls-retval-fix.patch
+remove-errno-refs.patch
+ia64-remove-errno-refs.patch

Fiddle with kernel syscalls and remove the global `errno' variable. I actually meant to drop this because we'll be doing it differently.

+warn-when-smp_call_function-is-called-with-interrupts-disabled.patch

smp_call_function() is deadlocky if the caller has disabled interrupts

+initio-ini-9x00u-uw-error-handling-in-26.patch

Fix a scsi driver

+fixup-68360-module-refcounting.patch

Fix module refcounting in this driver.

+missing-closing-n-in-printk.patch

Fix a printk.

+intermezzo-stack-reduction.patch

Reduce stack usage in intermezzo

+lance-racal-interlan-fix.patch

Fix the lance net driver for one type of NIC.

+gcc-340-fixes-for-266-rc3-x86_64-kernel.patch

Fix the x86_64 port for gcc-3.4

+fix-warn_on-on-xfs-module-unload.patch

prevent a warning when xfs.ko is unloaded.

+ppc64-use-generic-ipc-syscall-translation.patch

PPC64 code consolidation

+proc-sys-kernel-vermagic.patch

Add /proc/sys/kernel/vermagic so that package installers can work out how the kernel was built (soliciting feedback on this one).

+ramdisk-size-warning-fix.patch

Fix an assembler warning

+cyclades-cleanups.patch
+cyclades-cleanups-cleanups.patch

Clean up the cyclades driver

+nforce-disconnect-fix.patch

Fix the nforce2 horrors.

+delete-posix-conformance-testing-by-unifix-message.patch

Kill another boot-time printk.

+jiffies-to-clockt-fix_a1.patch

Timekeeping accuracy fixes.

+readahead-private.patch

Prevent concurrent reads against the same fd from screwing with the readahead state.

+static-define_per_cpu-vs-modules-2.patch

Work around relative address displacement problems on s390.

+introduce-asm--8253pith.patch
+use-pit_tick_rate-in-spkrc.patch
+use-clock_tick_rate.patch

Fiddle with the PIT code to make it more friendly to non-PC machines.

+netpoll-attributions.patch

Update the attributions in netpoll.c

+265-es7000-subarch-update-for-generic-arch.patch

Make es7000 a real subarch

+new-i2c-video-decoder-calls.patch
+new-i2c-video-decoder-calls-saa7111.patch

i2c cleanups/fixes

+get_thread_area-macros.patch

Fix the get_thread_area() macros

+update-documentation-mdtxt.patch

MD documentation update

+invalid-notify_changesymlink-in-nfsd.patch

Fix notofy_change() in knfsd.

+bfs-filesystem-read-past-the-end-of-dir.patch

BFS fix

+simplify-mqueue_inode_info-messages-allocation.patch

Fix a leak in the posix message queue code.

+filtered-wakeups-core.patch +filtered-buffer_head-wakeups.patch +filtered-buffer_head-wakeups-tweaks.patch +wake-one-pg_locked-bh_lock-semantics.patch +wake-one-pg_locked-bh_lock-semantics-tweaks.patch

More efficient sleeps and and wakeups, use them in the VFS.

All 332 patches:

linus.patch

page_mapping-race-fix.patch
page_mapping race fix

bk-acpi.patch

bk-agpgart.patch

bk-alsa.patch

bk-cifs.patch

bk-cpufreq.patch

bk-driver-core.patch

bk-drm.patch

bk-i2c.patch

bk-input.patch

bk-libata.patch

bk-netdev.patch

bk-ntfs.patch

bk-pci.patch

bk-scsi.patch

bk-usb.patch

mm.patch
add -mmN to EXTRAVERSION

frame-pointer-based-stack-dumps.patch
x86: stack dumps using frame pointers

frame-pointer-based-stack-dumps-tweaks.patch
frame-pointer-based-stack-dumps-tweaks

fealnx-bogon-fix.patch
fealnx.c spinlock fix

kgdb-ga.patch
kgdb stub for ia32 (George Anzinger's one)
kgdbL warning fix
kgdb buffer overflow fix
kgdbL warning fix
kgdb: CONFIG_DEBUG_INFO fix
x86_64 fixes
correct kgdb.txt Documentation link (against 2.6.1-rc1-mm2)
kgdb: fix for recent gcc
kgdb warning fixes
THREAD_SIZE fixes for kgdb

kgdboe-netpoll.patch
kgdb-over-ethernet via netpoll
kgdboe: fix configuration of MAC address

kgdb-x86_64-support.patch
kgdb-x86_64-support.patch for 2.6.2-rc1-mm3
kgdb-x86_64-warning-fixes

rmap-7-object-based-rmap.patch
rmap 7 object-based rmap

ia64-rmap-build-fix.patch
ia64 rmap build fix

rmap-8-unmap-nonlinear.patch
rmap 8 unmap nonlinear

slab-panic.patch
slab: consolidate panic code

rmap-9-remove-pte_chains.patch
rmap 9 remove pte_chains

rmap-9-page_add_anon_rmap-bug-fix.patch
page_add_anon_rmap BUG fix

rmap-10-add-anonmm-rmap.patch
rmap 10 add anonmm rmap

rmap-anonhd-locking-fix.patch
rmap anonhd locking fix

rmap-11-mremap-moves.patch
rmap 11 mremap moves

rmap-12-pgtable-remove-rmap.patch
rmap 12 pgtable remove rmap

rmap-13-include-asm-deletions.patch
rmap 13 include/asm deletions

i_shared_lock.patch
Convert i_shared_sem back to a spinlock
i_shared_lock fix 1
i_shared_lock fix 2
i_shared_lock mremap fix

rmap-14-i_shared_lock-fixes.patch
rmap 14: i_shared_lock fixes

numa-api-x86_64.patch
numa api: -64 support
numa api: Bitmap bugfix

numa-api-i386.patch
numa api: Add i386 support

numa-api-ia64.patch
numa api: Add IA64 support

numa-api-core.patch
numa api: Core NUMA API code
numa api: docs and policy_vma() locking fix numa-api-core-tweaks
Some fixes for NUMA API
From: Matthew Dobson <[email protected]>
Subject: [PATCH] include/linux/gfp.h cleanup for NUMA API numa-api-core bitmap_clear fixes

mpol-in-copy_vma.patch
mpol in copy_vma

numa-api-core-slab-panic.patch
numa-api-core-slab-panic

numa-api-statistics-2.patch
Re-add NUMA API statistics

numa-api-vma-policy-hooks.patch
numa api: Add VMA hooks for policy
numa-api-vma-policy-hooks fix

numa-api-shared-memory-support.patch
numa api: Add shared memory support
numa-api-shared-memory-support-tweaks

small-numa-api-fixups.patch
small numa api fixups

numa-api-statistics.patch
numa api: Add statistics

numa-api-anon-memory-policy.patch
numa api: Add policy support to anonymous memory

rmap-15-vma_adjust.patch
rmap 15: vma_adjust

rmap-16-pretend-prio_tree.patch
rmap 16: pretend prio_tree

rmap-17-real-prio_tree.patch
rmap 17: real prio_tree

rmap-18-i_mmap_nonlinear.patch
rmap 18: i_mmap_nonlinear

rmap-19-arch-prio_tree.patch
rmap 19: arch prio_tree

vm_area_struct-size-comment.patch
vm_area_struct size comment

rmapc-comment-style-fixups.patch
rmap.c comment/style fixups

rmap-20-i_mmap_shared-into-i_mmap.patch
rmap 20 i_mmap_shared into i_mmap

rmap-21-try_to_unmap_one-mapcount.patch
rmap 21 try_to_unmap_one mapcount

rmap-22-flush_dcache_mmap_lock.patch
rmap 22 flush_dcache_mmap_lock

rmap-23-empty-flush_dcache_mmap_lock.patch
rmap 23 empty flush_dcache_mmap_lock

partial-prefetch-for-vma_prio_tree_next.patch
partial prefetch for vma_prio_tree_next

fix-deadlock-in-journalled-quota.patch
Fix deadlock in journalled quota

fix-deadlock-in-journalled-quota-fix.patch
fix-deadlock-in-journalled-quota fix

mips-update.patch
MIPS update

mips-fix-mips-26-fb-setup.patch
mips: fix 2.6 fb setup

mips-simplify-expression.patch
mips: Simplify expression

mips-newport-driver-fixes.patch
mips: newport driver fixes

mips-remove-video_type_sni_rm.patch
mips: remove VIDEO_TYPE_SNI_RM

mips-gbe-video-driver.patch
mips: GBE Video Driver

mips-add-missing-ip22-zilog-bit.patch
mips: add missing IP22 Zilog bit

mips-64-bit-mips-needs-compat-stuff.patch
mips: 64-bit MIPS needs compat stuff

mips-remove-dz-driver.patch
mips: remove dz driver

mips-sgiwd93-26-fixes-and-crapectomy.patch
mips: sgiwd93 2.6 fixes and crapectomy

must-fix.patch
must fix lists update
must fix list update
mustfix update

must-fix-update-5.patch
must-fix update

ppc-ppc64-cleanup-ppc970-cpu-initialization.patch
ppc/ppc64: Cleanup PPC970 CPU initialization

benh-credits-update.patch
Fix my address in CREDITS

ppc32-add-missing-dma_mapping_error.patch
ppc32: Add missing [pci_]dma_mapping_error()

ppc64-reloc_hide.patch

invalidate_inodes-speedup.patch
invalidate_inodes speedup
more invalidate_inodes speedup fixes

config_spinline.patch
uninline spinlocks for profiling accuracy.

pdflush-diag.patch

get_user_pages-handle-VM_IO.patch
fix get_user_pages() against mappings of /dev/mem

pci_set_power_state-might-sleep.patch

CONFIG_STANDALONE-default-to-n.patch
Make CONFIG_STANDALONE default to N

slab-leak-detector.patch
slab leak detector
mm/slab.c warning in cache_alloc_debugcheck_after

local_bh_enable-warning-fix.patch

Move-saved_command_line-to-init-mainc.patch
Move saved_command_line to init/main.c

sched-run_list-cleanup.patch
small scheduler cleanup

sched-find_busiest_node-resolution-fix.patch
sched: improved resolution in find_busiest_node

sched-domains.patch
sched: scheduler domain support

sched-domain-debugging.patch
sched_domain debugging

sched-domain-balancing-improvements.patch
scheduler domain balancing improvements

sched-sibling-map-to-cpumask.patch
sched: cpu_sibling_map to cpu_mask

sched-domains-i386-ht.patch
sched: implement domains for i386 HT

sched-no-drop-balance.patch
sched: handle inter-CPU jiffies skew

sched-directed-migration.patch
sched_balance_exec(): don't fiddle with the cpus_allowed mask

sched-group-power.patch
sched-group-power

sched-domains-use-cpu_possible_map.patch
sched_domains: use cpu_possible_map

sched-smt-nice-handling.patch
sched: SMT niceness handling

sched-local-load.patch
sched: add local load metrics

sched-process-migration-speedup.patch
Reduce TLB flushing during process migration

sched-trivial.patch
sched: trivial fixes, cleanups

sched-hotplug-cpu-sched_balance_exec-fix.patch
Hotplug CPU sched_balance_exec Fix

sched-wakebalance-fixes.patch
sched: wakeup balancing fixes

sched-imbalance-fix.patch
sched: fix imbalance calculations

sched-altix-tune1.patch
sched: altix tuning

sched-fix-activelb.patch
sched: oops fix

sched-ppc64-sched-domain-support.patch
ppc64: sched-domain support

sched-ppc64-sched-domain-support-fix.patch
ARCH_HAS_SCHED_WAKE_BALANCE doesnt exist

sched-domain-setup-lock.patch
sched: fix setup races

sched-minor-cleanups.patch
sched: minor cleanups

sched-inline-removals.patch
sched: uninlinings

sched-move-cold-task.patch
sched: move cold task in mysteriouis ways

sched-migrate-shortcut.patch
sched: add migration shortcut

sched-more-sync-wakeups.patch
sched: extend sync wakeups

sched-boot-fix.patch
sched: lock cpu_attach_domain for hotplug

sched-cleanups.patch
sched: cleanups

sched-damp-passive-balance.patch
sched: passive balancing damping

sched-cpu-load-cleanup.patch
sched: cpu load management cleanup

sched-balance-context.patch
sched: balance-on-clone

sched-less-idle.patch
sched: reduce idle time

sched-wake_up-speedup.patch
sched: micro-optimisation for wake_up

sched-smt-domain-race.patch
sched: Look at another CPU's domain

sched-move-migrate_all_tasks-to-cpu_dead-handling.patch
Move migrate_all_tasks to CPU_DEAD handling

sched-move-migrate_all_tasks-to-cpu_dead-handling-up-fix.patch
sched-move-migrate_all_tasks-to-cpu_dead-handling-up-fix

sched-move-migrate_all_tasks-to-cpu_dead-handling-unlikely-cleanup.patch
Move migrate_all_tasks to CPU_DEAD handling: unlikely() cleanup

sched-sys_sched_getaffinity_lock_cpu_hotplug.patch
sched_getaffinity vs cpu hotplug race fix

sched-kthread_stop_race_fix.patch
migration_thread() race fix

schedstats.patch
sched: scheduler statistics

fixes-in-32-bit-ioctl-emulation-code.patch
Fixes in 32 bit ioctl emulation code

cond_resched-might-sleep.patch
cond_resched() might sleep

fa311-mac-address-fix.patch
wrong mac address with netgear FA311 ethernet card

pid_max-fix.patch
Bug when setting pid_max > 32k

use-soft-float.patch
Use -msoft-float

non-readable-binaries.patch
Handle non-readable binfmt_misc executables

binfmt_misc-credentials.patch
binfmt_misc: improve calaulation of interpreter's credentials

binfmt_misc-credentials-fixes.patch
binfmt_misc-credentials cleanups and fixes

binfmt_misc-credentials-fixes-2.patch
More binfmt_misc-credentials fixes

poll-select-longer-timeouts.patch
poll()/select(): support longer timeouts

poll-select-range-check-fix.patch
poll()/select() range checking fix

poll-select-handle-large-timeouts.patch
poll()/select(): handle long timeouts

add-a-slab-for-ethernet.patch
Add a kmalloc slab for ethernet packets

siimage-update.patch
ide: update for siimage driver

nmi_watchdog-local-apic-fix.patch
Fix nmi_watchdog=2 and P4 HT

nmi-1-hz-2.patch
reduce NMI watchdog call frequency with local APIC.

shm-do_munmap-check.patch

stack-overflow-test-fix.patch
Fix stack overflow test for non-8k stacks

jbd-remove-livelock-avoidance.patch
JBD: remove livelock avoidance code in journal_dirty_data()

logitech-keyboard-fix.patch
2.6.5-rc2 keyboard breakage

stack-reductions-nfsread.patch
stack reductions: nfs read

speed-up-sata.patch
speed up SATA

advansys-fix.patch
advansys check_region() fix

journal_add_journal_head-debug.patch
journal_add_journal_head-debug

nfs-O_DIRECT-fixes.patch
NFS: O_DIRECT fixes

list_del-debug.patch
list_del debug check

oops-dump-preceding-code.patch
i386 oops output: dump preceding code

lockmeter.patch
lockmeter
ia64 CONFIG_LOCKMETER fix

cciss-logical-device-queues.patch
cciss: per logical device queues

sk98lin-buggy-vpd-workaround.patch
net/sk98lin: correct buggy VPD in ASUS MB

unplug-can-sleep.patch
unplug functions can sleep

firestream-warnings.patch
firestream warnings

ext3_rsv_cleanup.patch
ext3 block reservation patch set -- ext3 preallocation cleanup

ext3_rsv_base.patch
ext3 block reservation patch set -- ext3 block reservation
ext3 reservations: fix performance regression
ext3 block reservation patch set -- mount and ioctl feature ext3 block reservation patch set -- dynamically increase reservation window

ext3-reservation-default-on.patch
ext3 reservation: default to on

ext3-reservation-ifdef-cleanup-patch.patch
ext3 reservation ifdef cleanup patch

ext3-reservation-max-window-size-check-patch.patch
ext3 reservation max window size check patch

ext3-reservation-file-ioctl-fix.patch
ext3 reservation file ioctl fix

ext3-lazy-discard-reservation-window-patch.patch
ext3 lazy discard reservation window patch

ext3-discard-reservation-in-last-iput-fix-patch.patch
ext3 discard reservation in last iput fix patch

ext3-discard-reservation-in-last-iput-fix-patch-fix.patch
Fix lazy reservation discard

ext3-reservation-bad-inode-fix.patch
ext3 reservations: bad_inode fix

ext3-bogus-enospc-fix.patch
Fix ext3 bogus ENOSPC

sched-in_sched_functions.patch
sched: in_sched_functions() cleanup

sysfs-d_fsdata-race-fix-2.patch
kobject/sysfs race fix

0-autofs4-2.6.0-signal-20040405.patch
autofs: dnotify + autofs may create signal/restart syscall loop

add-omitted-autofs4-super-block-field.patch
add omitted autofs4 super block field

1-autofs4-2.6.4-cleanup-20040405.patch
autofs: printk cleanups

2-autofs4-2.6.4-fill_super-20040405.patch

3-autofs4-2.6.0-bkl-20040405.patch
autofs: locking rework

4-autofs4-2.6.0-expire-20040405.patch
autofs: expiry refcount fixes

4-autofs4-260-expire-20040405-fix.patch
4-autofs4-2.6.0-expire-20040405 locking fix

4-autofs4-260-expire-20040405-fix-fix.patch
autofs expiry fix

4-autofs4-2.6.0-expire-20040405-may_umount_tree-cleanup.patch
autofs4: may_umount_tree() cleanup

5-autofs4-2.6.0-readdir-20040405.patch
autofs: readdir fixes

umount-after-bad-chdir.patch
fix umount after bad chdir

autofs4-fix-handling-of-chdir-and-chroot.patch
autofs4: fix handling of chdir and chroot

6-autofs4-2.6.0-may_umount-20040405.patch
autofs: add ioctl to query unmountability

7-autofs4-2.6.0-extra-20040405.patch
autofs: readdir futureproofing

autofs-locking-fix.patch
autofs locking fix

autofs4-race-fix.patch
autofs4 race fix

ext3-error-handling-fixes.patch
ext3 error handling fixes

re-open-descriptors-closed-on-exec-by-selinux-to.patch
selinux: reopen descriptors closed on exec to /dev/null

cyclades-maintainers-update.patch
cyclades MAINTAINERS update

laptop-mode-mutt-noatime-doc-update.patch
Laptop Mode doc update

as-increase-batch-expiry.patch
AS: increase batch expiry intervals

consolidate-sys32_readv-and-sys32_writev.patch
Consolidate sys32_readv and sys32_writev

consolidate-do_execve32.patch
Consolidate do_execve32

consolidate-sys32_select.patch
Consolidate sys32_select

consolidate-sys32_nfsservctl.patch
Consolidate sys32_nfsservctl

clean-up-asm-pgalloch-include.patch
Clean up asm/pgalloc.h include

clean-up-asm-pgalloch-include-2.patch
Clean up asm/pgalloc.h include

clean-up-asm-pgalloch-include-3.patch
Clean up asm/pgalloc.h include 3

ppc64-uninline-__pte_free_tlb.patch
ppc64: uninline __pte_free_tlb()

es7000-subarch-update-2.patch
es7000 subarch update

input-tsdev-fixes.patch
tsdev.c fixes

fix-scancode-keycode-scancode-conversion-for-265.patch
Fix scancode->keycode->scancode conversion

use-less-stack-in-ide_unregister.patch
use less stack in ide_unregister

psmouse-fix-mouse-hotplugging.patch
psmouse: fix mouse hotplugging

neomagic-driver-update.patch
Neomagic driver update.

neomagic-driver-update-fix.patch
neomagic-driver-update fix

kernel_ppc8xx_misc.patch
ppc32: ppc8xx build fixes

remove-bootsect_helper-and-a-comment-fix-iii.patch
Remove bootsect_helper and a comment fix

fealnx-mac-address-and-other-issues.patch
Fealnx. Mac address and other issues

remove-some-unused-variables-in-s2io.patch
remove some unused variables in s2io

new-version-of-early-cpu-detect.patch
New version of early CPU detect

new-version-of-early-cpu-detect-fix.patch
new-version-of-early-cpu-detect-fix

radeon-garbled-screen-fix.patch
radeonfb: fix garbled screen

writepage-retval-warning.patch
writepage-retval-warning

shrink_slab-handle-GFP_NOFS.patch
shrink_slab: improved handling of GFP_NOFS allocations

shrink_slab-handle-GFP_NOFS-fix.patch
shrink_slab-handle-GFP_NOFS-fix

fix-3c59xc-to-allow-3c905c-100bt-fd.patch
fix 3c59x.c to allow 3c905c 100bT-FD

use-dos_extended_partition.patch
partitioning cleanup: use DOS_EXTENDED_PARTITION

reiserfs-commit-default-fix.patch
From: Bart Samwel <[email protected]>
Subject: [PATCH] Reiserfs commit default fix

reiserfs-acl-mknod.patch
reiserfs: acl device node initialization

reiserfs-xattrs-04.patch
reiserfs: xattr support

reiserfs-acl-02.patch
reiserfs: ACL support

reiserfs-trusted-02.patch
reiserfs: support trusted xattrs

reiserfs-selinux-02.patch
reiserfs: selinux support

reiserfs-xattr-locking-02.patch
reiserfs: xattr locking fixes

reiserfs-quota.patch
reiserfs: quota support

reiserfs-permission.patch
reiserfs: xattr permission fix

reiserfs-warning.patch
reiserfs: add device info to diagnostic messages

reiserfs-group-alloc-9.patch
reiserfs: block allocator optimizations

reiserfs-remove-debugging-warning-from-block-allocator.patch
reiserfs: remove debugging warning from block allocator

reiserfs-group-alloc-9-build-fix.patch
reiserfs-group-alloc-9 build fix

reiserfs-search_reada-5.patch
reiserfs: btree readahead

reiserfs-data-logging-support.patch
reiserfs data logging support

problems-with-atkbd_command--atkbd_interrupt-interaction.patch
Problems with atkbd_command & atkbd_interrupt interaction

mptfusion-depends-on-scsi.patch
mptfusion depends on scsi

mark-config_mac_serial-drivers-macintosh-macserialc-as-broken.patch
Mark CONFIG_MAC_SERIAL (drivers/macintosh/macserial.c) as broken

radeon-fb-screen-corruption-fix.patch
radeonfb display corruption fix

tridentfbc-warning-fix.patch
video/tridentfb.c warning fix

hgafbc-warning-fix.patch
video/hgafb.c warning fix

tdfxfbc-warning-fix.patch
video/tdfxfb.c warning fix

imsttfbc-warning-fix.patch
video/imsttfb.c. warning fix

fbdev-logo-handling-fix.patch
fbdev: clean up logo handling

fbdev-redundant-prows-calculation-removal.patch
fbdev: remove redundant p->vrows calculation

fbdev-remove-redundant-local.patch
fbdev: remove redundant local

fbdev-access_align-default.patch
fbdev: set a default access_align value

fix-null-ptr-dereference-in-pm2fb_probe-2.patch
Fix NULL-ptr dereference in pm2fb_probe

virtual-fbdev-updates.patch
Virtual fbdev updates

vesa-fbdev-update.patch
Vesa Fbdev update

vesa-fbdev-update-fix.patch
Vesa Fbdev update fix

sis-agp-updates.patch
SIS AGP updates

new-asiliant-framebuffer-driver.patch
New Asiliant framebuffer driver.

fbcon-and-unimap.patch
Fix fbcon and unimap

videodev-handle-class_register-failure.patch
videodev: handle class_register() failure

8139too-suspend-fix.patch
8139too not running s3 suspend/resume pci fix

acpiphp_glue-oops-fix.patch
acpiphp_glue.c oops fix

clear_backing_dev_congested.patch
clear_baking_dev_congested

dpt_i2o.patch
Fix dpt_i2o

find_user-locking.patch
find_user-locking

improve-laptop-modes-block_dump-output.patch
Improve laptop mode's block_dump output

com90xx_message.patch
com90xx error message patch: check_region() gone

parport_doc_arg.patch
Kill a warning while making pdfdocs.

kernel-api-docs.patch
Kill some 'No description found...' warnings. (kernel-api.sgml)

allow-architectures-to-reenable-interrupts-on-contended-spinlocks.patch
Allow architectures to reenable interrupts on contended spinlocks

allow-architectures-to-reenable-interrupts-on-contended-spinlocks-fix.patch
allow-architectures-to-reenable-interrupts-on-contended-spinlocks-fix

only-print-tainted-message-once.patch
Only Print Taint Message Once

ia64-cpuhotplug-core_kernel_init.patch
oa64 cpu hotplug: core kernel initialisation

ia64-cpuhotplug-init_removal.patch
ia64 cpu hotplug: init section fixes

ia64-cpuhotplug-sysfs_ia64.patch
ia64 cpu hotplug: sysfs additions

ia64-cpuhotplug-irq_affinity_fix.patch
ia64 cpu hotplug: IRQ affinity work

ia64-cpuhotplug-palinfo.patch
ia64 cpu hotplug: /proc rework

blk_start_queue-use-kblockd.patch
blk_start_queue() should use kblockd

module-ref-counting-for-vt-console-drivers.patch
Module ref counting for vt console drivers

edd-follow-sysfs-convention-module_version-remove-dead-scsi-symlink.patch
EDD: follow sysfs convention, MODULE_VERSION, remove dead SCSI symlink

cmpci-update.patch
cmpci OSS driver update

i2o-subsystem-fixing-and-cleanup-for-26-i2o-config-cleanpatch.patch
I2O subsystem fixing and cleanup for 2.6 - i2o-config-clean.patch

i2o-subsystem-fixing-and-cleanup-for-26-i2o-passthrupatch.patch
I2O subsystem fixing and cleanup for 2.6 - i2o-passthru.patch

i2o-subsystem-fixing-and-cleanup-for-26-i2o_block-cleanuppatch.patch
I2O subsystem fixing and cleanup for 2.6 - i2o_block-cleanup.patch

i2o-subsystem-fixing-and-cleanup-for-26-i2o-64-bit-fixpatch.patch
I2O subsystem fixing and cleanup for 2.6 - i2o-64-bit-fix.patch

i2o-subsystem-fixing-and-cleanup-for-26-i2o-makefile-cleanuppatch.patch
I2O subsystem fixing and cleanup for 2.6 - i2o-makefile-cleanup.patch

dentry-and-inode-cache-hash-algorithm-performance-changes.patch
dentry and inode cache hash algorithm performance changes.

fix-mtd-suspend-resume.patch
From: Russell King <[email protected]>
Subject: [MTD] Fix MTD suspend/resume

remove-blk_queue_bounce-messages.patch
remove blk_queue_bounce() printks

fix-deadlock-in-__create_workqueue-2.patch
a

throttle-p4-thermal-warnings.patch
throttle P4 thermal warnings

i82365c-warning-fix.patch
pcmcia/i82365.c warning fix

allow-i386-to-reenable-interrupts-on-lock-contention.patch
Allow i386 to reenable interrupts on lock contention

make-4k-stacks-permanent.patch
make-4k-stacks-permanent

worker_thread-race-fix.patch
worker_thread-race-fix

force-config_regparm-to-y.patch
Force CONFIG_REGPARM to `y'

kernel-syscalls-retval-fix.patch
a

remove-errno-refs.patch
remove-errno-refs

ia64-remove-errno-refs.patch
ia64-remove-errno-refs

warn-when-smp_call_function-is-called-with-interrupts-disabled.patch
Warn when smp_call_function() is called with interrupts disabled

initio-ini-9x00u-uw-error-handling-in-26.patch
Initio INI-9X00U/UW error handling

fixup-68360-module-refcounting.patch
fixup 68360 module refcounting

missing-closing-n-in-printk.patch
missing closing n in printk

intermezzo-stack-reduction.patch
intermezzos stack usage reduction

lance-racal-interlan-fix.patch
lance.c: fix for card with signature 0x52 0x49

gcc-340-fixes-for-266-rc3-x86_64-kernel.patch
gcc-3.4.0 fixes for 2.6.6-rc3 x86_64 kernel

fix-warn_on-on-xfs-module-unload.patch
fix WARN_ON on XFS module unload

ppc64-use-generic-ipc-syscall-translation.patch
ppc64: use generic ipc syscall translation

proc-sys-kernel-vermagic.patch
add /proc/sys/kernel/vermagic

ramdisk-size-warning-fix.patch
fix ramdisk size assembler warning

cyclades-cleanups.patch
cyclades cleanups

cyclades-cleanups-cleanups.patch
cyclades cleanups cleanups

nforce-disconnect-fix.patch
nforce2 C1 halt disconnect fix

delete-posix-conformance-testing-by-unifix-message.patch
delete "POSIX conformance testing by UNIFIX" message

jiffies-to-clockt-fix_a1.patch
jiffies-to-clockt fix

readahead-private.patch
hack2

static-define_per_cpu-vs-modules-2.patch
static DEFINE_PER_CPU vs. modules

introduce-asm--8253pith.patch
CLOCK_TICK_RATE: introduce asm-*/8253pit.h, #define PIT_TICK_RATE constant.

use-pit_tick_rate-in-spkrc.patch
CLOCK_TICK_RATE: use PIT_TICK_RATE in *spkr.c

use-clock_tick_rate.patch
CLOCK_TICK_RATE: use CLOCK_TICK_RATE

netpoll-attributions.patch
netpoll attributions

265-es7000-subarch-update-for-generic-arch.patch
es7000 subarch update for generic arch

new-i2c-video-decoder-calls.patch
new i2c video decoder calls

new-i2c-video-decoder-calls-saa7111.patch
new i2c video decoder calls: saa7111 driver

get_thread_area-macros.patch
get_thread_area macro fixes

update-documentation-mdtxt.patch
update Documentation/md.txt

invalid-notify_changesymlink-in-nfsd.patch
Invalid notify_change(symlink, [ATTR_MODE]) in nfsd

bfs-filesystem-read-past-the-end-of-dir.patch
bfs filesystem read past the end of dir

simplify-mqueue_inode_info-messages-allocation.patch
simplify mqueue_inode_info->messages allocation

filtered-wakeups-core.patch
filtered wakeups: core

filtered-buffer_head-wakeups.patch
filtered buffer_head wakeups

filtered-buffer_head-wakeups-tweaks.patch
filtered-buffer_head-wakeups-tweaks

wake-one-pg_locked-bh_lock-semantics.patch
wake-one PG_locked/BH_Lock semantics

wake-one-pg_locked-bh_lock-semantics-tweaks.patch
wake-one-pg_locked-bh_lock-semantics-tweaks

#1 lore raw

Alle 10:31, mercoledì 5 maggio 2004, hai scritto:

Quoted 2 lines

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.6-rc3/2.6 .6-rc3-mm2/

hm.. I've found only 2.6.6-rc3-mm3.gz in
http://www.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.6-rc3/2.6.6-rc3-mm2/

Wrong filename?

Signature · 4 lines
Fabio Coatti       http://www.ferrara.linux.it/members/cova     
Ferrara Linux Users Group           http://ferrara.linux.it
GnuPG fp:9765 A5B6 6843 17BC A646  BE8C FA56 373A 5374 C703
Old SysOps never die... they simply forget their password.
#2 lore raw
In reply to Andrew Morton
Quoted 2 lines · On Wed, 5 May 2004 01:31:35 -0700 Andrew Morton <[email protected]> wrote:

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.6-rc3/2.6.6-rc3-mm2/

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.6-rc3/2.6.6-rc3-mm2/2.6.6-rc3-mm3.gz

File name does not match

Signature · 2 lines
 Onur Kucuk                                        Knowledge speaks,   
 <onur.--.-.delipenguen.net>                       but wisdom listens  
#3 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

In reply to Andrew Morton
Quoted 3 lines · you

+make-4k-stacks-permanent.patch

Fill my inbox.

Hi Andrew!

Is there any reason why this patch was applied? Because NVidia users can't work with the original drivers now without removing this patch every time.

greets Dominik

#4 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

* Dominik Karall <[email protected]>:

Quoted 9 lines · you
Quoted 3 lines

+make-4k-stacks-permanent.patch

Fill my inbox.

Hi Andrew!

Is there any reason why this patch was applied? Because NVidia users can't work with the original drivers now without removing this patch every time.

Yes, this really sucks (you can choose which "this" I mean)

Signature · 4 lines
Ralf Hildebrandt (Im Auftrag des Referat V a)   [email protected]
Charite - Universitätsmedizin Berlin            Tel.  +49 (0)30-450 570-155
Gemeinsame Einrichtung von FU- und HU-Berlin    Fax.  +49 (0)30-450 570-916
IT-Zentrum Standort Campus Mitte                          AIM.  ralfpostfix
#5 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

In reply to Dominik Karall

On Wed, 2004-05-05 13:12:30 +0200, Dominik Karall <[email protected]> wrote in message <[email protected]>:

Quoted 7 lines · you
Quoted 3 lines

+make-4k-stacks-permanent.patch

Fill my inbox.

Is there any reason why this patch was applied? Because NVidia users can't work with the original drivers now without removing this patch every time.

Wrong place to ask:) Go, ask NVidia for a solution. Their driver would long be working with 4K stacks if they had open-sourced it...

MfG, JBG

Signature · 4 lines
   Jan-Benedict Glaw       [email protected]    . +49-172-7608481
   "Eine Freie Meinung in  einem Freien Kopf    | Gegen Zensur | Gegen Krieg
    fuer einen Freien Staat voll Freier Bürger" | im Internet! |   im Irak!
   ret = do_actions((curr | FREE_SPEECH) & ~(NEW_COPYRIGHT_LAW | DRM | TCPA));
#6 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

In reply to Dominik Karall
Quoted 8 lines · Dominik Karall
Quoted 3 lines · you

+make-4k-stacks-permanent.patch

Fill my inbox.

Hi Andrew!

Is there any reason why this patch was applied? Because NVidia users

nvidia users can use the nv driver instead? And/Or ask the nvidia binary only people for a fixed driver ?

#7 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

In reply to Dominik Karall
Quoted 11 lines · Dominik Karall
Quoted 3 lines · you

+make-4k-stacks-permanent.patch

Fill my inbox.

Hi Andrew!

Is there any reason why this patch was applied? Because NVidia users can't work with the original drivers now without removing this patch every time.

We need to push this issue along quickly. The single-page stack generally gives us a better kernel and having the stack size configurable creates pain.

#8 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 3 lines · Andrew Morton

We need to push this issue along quickly. The single-page stack generally gives us a better kernel and having the stack size configurable creates pain.

Hi. No idea if you want this. Not seeing 4KSTACKS in there made me recheck.

Rene.

# restore 4KSTACKS to VERMAGIC
include/asm-i386/module.h renamed from include/asm-i386/module.h.orig +0 -4
@@ -60,11 +60,7 @@
 #define MODULE_REGPARM ""
 #endif
 
-#ifdef CONFIG_4KSTACKS
 #define MODULE_STACKSIZE "4KSTACKS "
-#else
-#define MODULE_STACKSIZE ""
-#endif
 
 #define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY MODULE_REGPARM MODULE_STACKSIZE
 
#9 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

In reply to Andrew Morton
Quoted 10 lines · Andrew Morton
Quoted 8 lines · Dominik Karall
Quoted 3 lines · you

+make-4k-stacks-permanent.patch

Fill my inbox.

Hi Andrew!

Quoted 7 lines
Quoted 2 lines

Is there any reason why this patch was applied? Because NVidia users can't work with the original drivers now without removing this patch every time.

We need to push this issue along quickly. The single-page stack generally gives us a better kernel and having the stack size configurable creates pain.

Is it less pain than making something like a memory allocation which comes out of a deep stack? Say, nfs server -> filesystem -> lvm/raid -> fiber channel, which itself does something like a writepage into an nfs filesystem and ends up in the networking stack? OK, getting back into the filesystem on a memory allocation from the block layer should not happen, but you could certainly be down in the bowels of the first filesystem when this happens.

There are other combinations which worry me. I do wonder how close to the edge some of these are living now and cutting them off at the knees, stack wise, is going to bite later. How many folks run the mm kernel in production server environments?

Maybe there should be a competition to see how convoluted a stack you can generate out of the kernel ;-)

Steve

#10 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 4 lines · Steve Lord

There are other combinations which worry me. I do wonder how close to the edge some of these are living now and cutting them off at the knees, stack wise, is going to bite later. How many folks run the mm kernel in production server environments?

Me... Although the servers aren't critical. However, I know I'm a minority...

#11 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

In reply to Steve Lord
Quoted 7 lines

Is it less pain than making something like a memory allocation which comes out of a deep stack? Say, nfs server -> filesystem -> lvm/raid -> fiber channel, which itself does something like a writepage into an nfs filesystem and ends up in the networking stack? OK, getting back into the filesystem on a memory allocation from the block layer should not happen, but you could certainly be down in

it's not really much different than the 2.4 kernel already has. In 2.4 you have a 8Kb stack of which

First 1600 bytes (+/-) are for the task struct
about 4Kb of user context stack

Quoted 1 line

= 2Kb stack which is needed for irq context (both soft and hard)

In 2.6 with this patch you have

32 bytes for thread info
4Kb minus 32 bytes for context stack
SEPARATE softirq stack of 4K
SEPARATE hardirq stack of 4K

so in a way you have MORE stack space than in 2.4.

Now I'll fully admit the 2Kb is somewhat of a stochast, you only hit it if you have iptable rules and 2 nic irq's arriving on the same cpu at an unfortionate moment, but that doesn't mean it's a safe situation.

#12 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 5 lines

Now I'll fully admit the 2Kb is somewhat of a stochast, you only hit it if you have iptable rules and 2 nic irq's arriving on the same cpu at an unfortionate moment, but that doesn't mean it's a safe situation.

s/safe/safer than 2.6/

#13 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

In reply to Arjan van de Ven
Quoted 24 lines · Arjan van de Ven
Quoted 6 lines

Is it less pain than making something like a memory allocation which comes out of a deep stack? Say, nfs server -> filesystem -> lvm/raid -> fiber channel, which itself does something like a writepage into an nfs filesystem and ends up in the networking stack? OK, getting back into the filesystem on a memory allocation from the block layer should not happen, but you could certainly be down in

it's not really much different than the 2.4 kernel already has. In 2.4 you have a 8Kb stack of which

First 1600 bytes (+/-) are for the task struct
about 4Kb of user context stack

Quoted 1 line

= 2Kb stack which is needed for irq context (both soft and hard)

In 2.6 with this patch you have

32 bytes for thread info
4Kb minus 32 bytes for context stack
SEPARATE softirq stack of 4K
SEPARATE hardirq stack of 4K

Quoted 6 lines

so in a way you have MORE stack space than in 2.4.

Now I'll fully admit the 2Kb is somewhat of a stochast, you only hit it if you have iptable rules and 2 nic irq's arriving on the same cpu at an unfortionate moment, but that doesn't mean it's a safe situation.

I agree with that, but that combination had a heck of a lot of soak time on it. This stack crunching exercise is happening fairly early on in a stable kernel series, that makes me nervous. A lot of new code showed up in the meantime during 2.5 development which changed many of these code paths.

You can do static code analysis and say which functions are stack hogs and rework them, but the dynamic analysis is really hard to do for all possibly combinations. Doing the dynamic analysis on someones production fileserver may not be the wisest move ever made.

Steve

#14 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

In reply to Steve Lord

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

I do

and Ihave nvidia video card :-), last couple of week been running 2.6.5 because of the problem with the module nvidia.o and teh 4STACK thing

But as soon as I get to compile the new mm kernel, and reboot, will continue to work on a mm like the last months.

Actually I've been using mm kernels most of the time since AC patches stoped when Alan left to his Ph.D., or what ever he's doing right now.

Max
- --
Linux garaged 2.6.5-rc2-mm3 #1 Fri Mar 26 11:07:16 CST 2004 i686 Intel(R) Pentium(R) 4 CPU 2.80GHz GenuineIntel GNU/Linux
- -----BEGIN GEEK CODE BLOCK-----
Version: 3.12
GS/S d- s: a-29 C++(+++) ULAHI+++ P+ L++>+++ E--- W++ N* o-- K- w++++ O- M-- V-- PS+ PE Y-- PGP++ t- 5- X+ R tv++ b+ DI+++ D- G++ e++ h+ r+ z**
- ------END GEEK CODE BLOCK------
gpg-key: http://garaged.homeip.net/gpg-key.txt
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFAmnmNNNkpVEFxW78RAm+5AJ0c5/U5nmrzFFh9aS0p3iGBcwZVlgCdGMx9 1CwtWd5W01omEDfWO6iHpVk=
=KM7C
-----END PGP SIGNATURE-----

#15 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

In reply to Andrew Morton
Quoted 10 lines · Andrew Morton
Quoted 8 lines · Dominik Karall
Quoted 3 lines · you

+make-4k-stacks-permanent.patch

Fill my inbox.

Hi Andrew!

Quoted 7 lines
Quoted 2 lines

Is there any reason why this patch was applied? Because NVidia users can't work with the original drivers now without removing this patch every time.

We need to push this issue along quickly. The single-page stack generally gives us a better kernel and having the stack size configurable creates pain.

Add my voice to those who don't think 4k stacks are a good idea as a default, they break some things and seem to leave other paths (as others have noted) on the edge. I'm not sure what you have in mind as a "better kernel" but I'd rather have a worse kernel and not have to check 4k stack as a possible problem before looking at other things if I get bad behaviour.

Reliability first, performance later. We've lived with the config for a while, pain there is better than pain at runtime.

Signature · 3 lines
   -bill davidsen ([email protected])
"The secret to procrastination is to put things off until the
 last possible moment - but no longer"  -me
#16 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 24 lines · Bill Davidsen
Quoted 8 lines · Andrew Morton
Quoted 7 lines · Dominik Karall
Quoted 3 lines · you

+make-4k-stacks-permanent.patch

Fill my inbox.

Hi Andrew!

Quoted 7 lines
Quoted 3 lines

Is there any reason why this patch was applied? Because NVidia users can't work with the original drivers now without removing this patch every time.

We need to push this issue along quickly. The single-page stack generally gives us a better kernel and having the stack size configurable creates pain.

Add my voice to those who don't think 4k stacks are a good idea as a default, they break some things and seem to leave other paths (as others have noted) on the edge. I'm not sure what you have in mind as a "better kernel" but I'd rather have a worse kernel and not have to check 4k stack as a possible problem before looking at other things if I get bad behaviour.

Quoted 2 lines

Reliability first, performance later. We've lived with the config for a while, pain there is better than pain at runtime.

Opposite opinion here.

If you want 100% reliability you shouldn't use -mm in the first place.

Making 4kb stacks default in -mm is very good idea so it will get necessary testing and fixing before being integrated into mainline.

Please also note that users of binary only modules always have choice:
- new kernels without binary only modules
- old kernels with binary only modules

It is really that simple.

Regards,
Bartlomiej

#17 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 2 lines · Bartlomiej Zolnierkiewicz

Making 4kb stacks default in -mm is very good idea so it will get necessary testing and fixing before being integrated into mainline.

Then let us test with _AND_ without 4KSTACKS.

I love the -mm three, but I use a nvidia GFX card too. Making 4KSTACkS permanent excludes me from more testing.

Best regards,
Norberto

#18 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 5 lines · Norberto Bensa
Quoted 2 lines · Bartlomiej Zolnierkiewicz

Making 4kb stacks default in -mm is very good idea so it will get necessary testing and fixing before being integrated into mainline.

Then let us test with _AND_ without 4KSTACKS.

You are free to remove this patch from your kernel. 8)

Quoted 2 lines

I love the -mm three, but I use a nvidia GFX card too. Making 4KSTACkS permanent excludes me from more testing.

We currently need testing for 4KSTACKS. Please also note that your testing with binary modules loaded has limited value as you should always reproduce problem w/o binary modules before reporting problem.

Regards,
Bartlomiej

#19 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 3 lines · Bartlomiej Zolnierkiewicz
Quoted 1 line

Then let us test with _AND_ without 4KSTACKS.

You are free to remove this patch from your kernel. 8)

I already do ;-)

That was not my point.

Thanks anyway,
Norberto

#20 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

In reply to Bartlomiej Zolnierkiewicz
Quoted 37 lines · Bartlomiej Zolnierkiewicz
Quoted 27 lines · Bill Davidsen
Quoted 10 lines · Andrew Morton
Quoted 8 lines · Dominik Karall
Quoted 3 lines · you

+make-4k-stacks-permanent.patch

Fill my inbox.

Hi Andrew!

Quoted 7 lines
Quoted 3 lines

Is there any reason why this patch was applied? Because NVidia users can't work with the original drivers now without removing this patch every time.

We need to push this issue along quickly. The single-page stack generally gives us a better kernel and having the stack size configurable creates pain.

Add my voice to those who don't think 4k stacks are a good idea as a default, they break some things and seem to leave other paths (as others have noted) on the edge. I'm not sure what you have in mind as a "better kernel" but I'd rather have a worse kernel and not have to check 4k stack as a possible problem before looking at other things if I get bad behaviour.

Quoted 2 lines

Reliability first, performance later. We've lived with the config for a while, pain there is better than pain at runtime.

Opposite opinion here.

If you want 100% reliability you shouldn't use -mm in the first place.

Quoted 8 lines

Making 4kb stacks default in -mm is very good idea so it will get necessary testing and fixing before being integrated into mainline.

Please also note that users of binary only modules always have choice:
- new kernels without binary only modules
- old kernels with binary only modules

It is really that simple.

No it's not that simple, this has nothing to do with binary modules, and everything to do with not making 4k stack the only available configuration in 2.6. Options are fine, but in a stable kernel series I don't think think that the default should change part way into the series, and certainly the availability of the original functionality shouldn't go away, which is what I read AKPMs original post to state as the goal.

Making changes to the kernel which will break existing applications seems to be the opposite of "stable." People who want a new kernel for fixes don't usually want to have to upgrade and/or rewrite their applications. The "we change the system interface everything we fix a bug" approach comes from a well-known software company, but shouldn't be the way *good* software is done.

Signature · 3 lines
bill davidsen <[email protected]>
  CTO TMR Associates, Inc
  Doing interesting things with small computers since 1979
#21 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 42 lines · Bill Davidsen
Quoted 32 lines · Bartlomiej Zolnierkiewicz
Quoted 24 lines · Bill Davidsen
Quoted 8 lines · Andrew Morton
Quoted 7 lines · Dominik Karall
Quoted 3 lines · you

+make-4k-stacks-permanent.patch

Fill my inbox.

Hi Andrew!

Quoted 7 lines
Quoted 3 lines

Is there any reason why this patch was applied? Because NVidia users can't work with the original drivers now without removing this patch every time.

We need to push this issue along quickly. The single-page stack generally gives us a better kernel and having the stack size configurable creates pain.

Add my voice to those who don't think 4k stacks are a good idea as a default, they break some things and seem to leave other paths (as others have noted) on the edge. I'm not sure what you have in mind as a "better kernel" but I'd rather have a worse kernel and not have to check 4k stack as a possible problem before looking at other things if I get bad behaviour.

Quoted 2 lines

Reliability first, performance later. We've lived with the config for a while, pain there is better than pain at runtime.

Opposite opinion here.

If you want 100% reliability you shouldn't use -mm in the first place.

Quoted 8 lines

Making 4kb stacks default in -mm is very good idea so it will get necessary testing and fixing before being integrated into mainline.

Please also note that users of binary only modules always have choice:
- new kernels without binary only modules
- old kernels with binary only modules

It is really that simple.

Quoted 7 lines

No it's not that simple, this has nothing to do with binary modules, and everything to do with not making 4k stack the only available configuration in 2.6. Options are fine, but in a stable kernel series I don't think think that the default should change part way into the series, and certainly the availability of the original functionality shouldn't go away, which is what I read AKPMs original post to state as the goal.

What functionality are you talking about?
We don't care about out of tree kernel code (be it GPL or Proprietary).

Quoted 4 lines

Making changes to the kernel which will break existing applications seems to be the opposite of "stable." People who want a new kernel for fixes don't usually want to have to upgrade and/or rewrite their applications. The "we change the system interface everything we fix a

You don't understand what the patch is really about.

This is kernel stack not the user-space one so
this change can't brake any application.

Quoted 2 lines

bug" approach comes from a well-known software company, but shouldn't be the way *good* software is done.

It doesn't change any kernel interface visible to user-space and stack hungry kernel code needs fixing anyway.

Regards,
Bartlomiej

#22 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 11 lines · Bartlomiej Zolnierkiewicz
Quoted 7 lines · Bill Davidsen

No it's not that simple, this has nothing to do with binary modules, and everything to do with not making 4k stack the only available configuration in 2.6. Options are fine, but in a stable kernel series I don't think think that the default should change part way into the series, and certainly the availability of the original functionality shouldn't go away, which is what I read AKPMs original post to state as the goal.

What functionality are you talking about?
We don't care about out of tree kernel code (be it GPL or Proprietary).

Let me say this one more time, since you keep changing the topic so you can say that you don't care about something I never mentioned. I am **NOT** talking about binary modules, I am **NOT** talking about out of tree code, I am talking about applications which make calls that cause the **IN TREE** code to use more than 4k.

Quoted 10 lines
Quoted 5 lines

Making changes to the kernel which will break existing applications seems to be the opposite of "stable." People who want a new kernel for fixes don't usually want to have to upgrade and/or rewrite their applications. The "we change the system interface everything we fix a

You don't understand what the patch is really about.

This is kernel stack not the user-space one so
this change can't brake any application.

Right, the kernel code does not contain any places where the data passed in a system call isn't reflected in stack usage.

Quoted 6 lines
Quoted 3 lines

bug" approach comes from a well-known software company, but shouldn't be the way *good* software is done.

It doesn't change any kernel interface visible to user-space and stack hungry kernel code needs fixing anyway.

And what better way to detect it than to release it in a stable kernel. Don't bother to say "don't use -mm" AKPM has said it is intended for the stable kernel, work or not.

===
Third request for info
===
I still haven't seen any objective data showing that there is any measureable benefit from this, although I agree that smaller is good practice, I don't think that throwing in a feature in a stable kernel, which has been reported by others to corrupt data, is the best way to do it.

Signature · 3 lines
bill davidsen <[email protected]>
  CTO, TMR Associates, Inc
Doing interesting things with little computers since 1979.
#23 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 10 lines · Bill Davidsen
Quoted 9 lines · Bartlomiej Zolnierkiewicz
Quoted 7 lines · Bill Davidsen

No it's not that simple, this has nothing to do with binary modules, and everything to do with not making 4k stack the only available configuration in 2.6. Options are fine, but in a stable kernel series I don't think think that the default should change part way into the series, and certainly the availability of the original functionality shouldn't go away, which is what I read AKPMs original post to state as the goal.

Quoted 8 lines
Quoted 2 lines

What functionality are you talking about?
We don't care about out of tree kernel code (be it GPL or Proprietary).

Let me say this one more time, since you keep changing the topic so you can say that you don't care about something I never mentioned. I am **NOT** talking about binary modules, I am **NOT** talking about out of tree code, I am talking about applications which make calls that cause the **IN TREE** code to use more than 4k.

No need to flame, I really didn't know what you were talking about.

I agree that this is a very good argument against pushing this change to mainline quickly (proposed originally by AKPM).

Quoted 5 lines
Quoted 5 lines
Quoted 4 lines

Making changes to the kernel which will break existing applications seems to be the opposite of "stable." People who want a new kernel for fixes don't usually want to have to upgrade and/or rewrite their applications. The "we change the system interface everything we fix a

Quoted 7 lines
Quoted 4 lines

You don't understand what the patch is really about.

This is kernel stack not the user-space one so
this change can't brake any application.

Right, the kernel code does not contain any places where the data passed in a system call isn't reflected in stack usage.

It won't break applications it will break kernel first. ;-)

You need to fix kernel code not the user space.

Quoted 9 lines
Quoted 5 lines
Quoted 2 lines

bug" approach comes from a well-known software company, but shouldn't be the way *good* software is done.

It doesn't change any kernel interface visible to user-space and stack hungry kernel code needs fixing anyway.

And what better way to detect it than to release it in a stable kernel. Don't bother to say "don't use -mm" AKPM has said it is intended for the stable kernel, work or not.

I see no problem with this approach (this patch in -mm then in linus') but issues mentioned by you need fixing first. I'm not proposing to push it to mainline NOW - it needs to be done CAREFULLY but CAN be done in 2.6 (i.e. 2.6.15).

I guess this is what we can't agree on.

Quoted 8 lines

===
Third request for info
===
I still haven't seen any objective data showing that there is any measureable benefit from this, although I agree that smaller is good practice, I don't think that throwing in a feature in a stable kernel, which has been reported by others to corrupt data, is the best way to do it.

There was some evidence from AKPM (and Arjan AFAIR). [ BTW wasn't the corruption only seen with nvidia module? ] I think we can prevent it by adding something ala 4kstack flag to the module.

Regards,
Bartlomiej

#24 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 5 lines · Bartlomiej Zolnierkiewicz

There was some evidence from AKPM (and Arjan AFAIR). [ BTW wasn't the corruption only seen with nvidia module? ] I think we can prevent it by adding something ala 4kstack flag to the module.

"4KSTACKS" already is present in the module version string.

And RHL is shipping now with 4k stacks, so presumably any disasters are relatively uncommon...

#25 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 2 lines · Andrew Morton

And RHL is shipping now with 4k stacks, so presumably any disasters are relatively uncommon...

I think currently, it's only the people running the -test or -devel Fedora trees that can get bit - Fedora Core 1 didn't have it, as it was still a 2.4 kernel, and Fedora Core 2 just kicked over from FC 1.92 last night..

And then they'd have to have NVidia cards, and use the NVIdia drivers..

and I suspect that most of the people who are in that group visit either one of the NVidia forums or www.minion.de, both of which have lots of tags saying that patch needs reverting...

So right now it's probably NOT biting too many, as only the clueful are getting into a situation where it's a problem.

Wait a week or two, when .ISO's of FC2 hit the streets. :)

#26 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

In reply to Andrew Morton
Quoted 11 lines · Andrew Morton
Quoted 5 lines · Bartlomiej Zolnierkiewicz

There was some evidence from AKPM (and Arjan AFAIR). [ BTW wasn't the corruption only seen with nvidia module? ] I think we can prevent it by adding something ala 4kstack flag to the module.

"4KSTACKS" already is present in the module version string.

And RHL is shipping now with 4k stacks, so presumably any disasters are relatively uncommon...

RHL and kernel.org have a lot of unshared bugs and features, unfortunately. I take that information as an encouraging proof of concept, not a waranty that the kernel.org code will behave in a similar way.

Signature · 3 lines
bill davidsen <[email protected]>
  CTO, TMR Associates, Inc
Doing interesting things with little computers since 1979.
#27 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 9 lines
Quoted 5 lines

"4KSTACKS" already is present in the module version string.

And Fedora is shipping now with 4k stacks, so presumably any disasters are relatively uncommon...

Fedora and kernel.org have a lot of unshared bugs and features, unfortunately. I take that information as an encouraging proof of concept, not a waranty that the kernel.org code will behave in a similar way.

Hey! That's slander of title! :-)
Seriously the difference between the Fedora Core 2 kernel and the matching kernel.org kernel aren't THAT big. The 4g/4g split patch being the biggest delta.

#28 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 10 lines · Arjan van de Ven
Quoted 8 lines
Quoted 4 lines

"4KSTACKS" already is present in the module version string.

And Fedora is shipping now with 4k stacks, so presumably any disasters are relatively uncommon...

Fedora and kernel.org have a lot of unshared bugs and features, unfortunately. I take that information as an encouraging proof of concept, not a waranty that the kernel.org code will behave in a similar way.

Quoted 5 lines

Hey! That's slander of title! :-)
Seriously the difference between the Fedora Core 2 kernel and the matching kernel.org kernel aren't THAT big. The 4g/4g split patch being the biggest delta.

I was thinking about the one you charge for... I wouldn't use FCn for production on a bet. I was thinking of my RHEL AS3.0 vs. kernel.org, which are kernels stable enough for commercial use.

Signature · 3 lines
bill davidsen <[email protected]>
  CTO TMR Associates, Inc
  Doing interesting things with small computers since 1979
#29 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

In reply to Bill Davidsen
Quoted 9 lines · Bill Davidsen
Quoted 4 lines · Andrew Morton

We need to push this issue along quickly. The single-page stack generally gives us a better kernel and having the stack size configurable creates pain.

Add my voice to those who don't think 4k stacks are a good idea as a default, they break some things and seem to leave other paths (as others have noted) on the edge. I'm not sure what you have in mind as a "better kernel" but I'd rather have a worse kernel and not have to check 4k stack as a possible problem before looking at other things if I get bad behaviour.

I think 4k stacks is perfectly ok for mm, as mm is an experimental testing ground anyway. Not everything in mm goes into the next 2.6.x.

Wether 4k goes into some 2.6 release or waits for 2.7 is another debate.

Helge Hafting

#30 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 18 lines · Helge Hafting
Quoted 9 lines · Bill Davidsen
Quoted 5 lines · Andrew Morton

We need to push this issue along quickly. The single-page stack generally
gives us a better kernel and having the stack size configurable creates pain.

Quoted 6 lines

Add my voice to those who don't think 4k stacks are a good idea as a default, they break some things and seem to leave other paths (as others have noted) on the edge. I'm not sure what you have in mind as a "better kernel" but I'd rather have a worse kernel and not have to check 4k stack as a possible problem before looking at other things if I get bad behaviour.

Quoted 5 lines

I think 4k stacks is perfectly ok for mm, as mm is an experimental testing ground anyway. Not everything in mm goes into the next 2.6.x.

Wether 4k goes into some 2.6 release or waits for 2.7 is another debate.

I think it's fine as an option, but taking it out of config and making it an immutable part of the kernel is probably undesirable. It appears to be a small gain (nothing I can easily measure), and a larger risk. I'd like that to be an optional risk, like many other things in the kernel, available to be used if the last drop of size or performance is desired.

Does someone has any numbers showing what this gains? I didn't see anything obvious when I tried it, so it's either very small or only in some case(s) I didn't try.

Signature · 3 lines
bill davidsen <[email protected]>
  CTO, TMR Associates, Inc
Doing interesting things with little computers since 1979.
#31 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

In reply to Dominik Karall
Quoted 2 lines · Dominik Karall

Is there any reason why this patch was applied? Because NVidia users can't work with the original drivers now without removing this patch every time.

The NVidia users will also have to back out the regparm patch, or insert 'asmlinkage' on all the appropriate definitions in the glue code. Note that the patches on www.minion.de already fix this for the 5341 drivers as of 03/24/2004.

In any case, even though I'm one of those NVidia users, I'm OK with the patch being in there - anybody who's clued enough to build and run a -mm kernel shouldn't have much trouble figuring out how to build it with 2 patches reverted.

#32 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 10 lines · On Wed, 5 May 2004 14:22:02 -0400, [email protected] wrote:
Quoted 2 lines · Dominik Karall

Is there any reason why this patch was applied? Because NVidia users can't work with the original drivers now without removing this patch every time.

The NVidia users will also have to back out the regparm patch, or insert 'asmlinkage' on all the appropriate definitions in the glue code. Note that the patches on www.minion.de already fix this for the 5341 drivers as of 03/24/2004.

Quoted 4 lines

In any case, even though I'm one of those NVidia users, I'm OK with the patch being in there - anybody who's clued enough to build and run a -mm kernel shouldn't have much trouble figuring out how to build it with 2 patches reverted.

I disagree. -mm is the testing ground for -linus. If this patch would only break the nvidia module, I couldn't care less. But breaking it in such a way that random kernel memory gets corrupted, which can soon backfire to the filesystem as well? That's not what most people understand when calling something "stable".

If this goes in, we should at least detect the nvidia module and refuse to load it. Maybe do the same for other modules as well or refuse to load any module that doesn't somehow state to be ok with 4k stacks. Details don't matter, as long as the filesystems survive.

Jörn

Signature · 3 lines
Das Aufregende am Schreiben ist es, eine Ordnung zu schaffen, wo
vorher keine existiert hat.
-- Doris Lessing
#33 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 2 lines · On Wed, 05 May 2004 23:51:36 +0200, =?iso-8859-1?Q?J=F6rn?= Engel said:

I disagree. -mm is the testing ground for -linus. If this patch would only break the nvidia module, I couldn't care less.

OK.. I need to clarify - I'm OK on the patch being *in -mm* precisely *because* it's a testing ground. Anybody who's running a -mm kernel should have the technical savvy to deal with the issue by reverting the one patch in question, and to recover if it eats their file system (Yes, I'm running 2.6.6-rc3-mm2 and the NVidia driver as I type. No, making it work wasn't a problem. Yes, I spin everything needed to rebuild out to CD/RW at least once a week, just because it *is* a -mm kernel. ;)

It's a Good Idea to do this in -mm, to flush out all the binary modules that are known to have issues with this (have we identified anybody other than NVidia that actually *has* a problem)?

It's probably a Bad Idea to push this to Linus before the vendors that have significant market-impact issues (again - anybody other than NVidia here?) have gotten their stuff cleaned up...

#34 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 4 lines

It's probably a Bad Idea to push this to Linus before the vendors that have significant market-impact issues (again - anybody other than NVidia here?) have gotten their stuff cleaned up...

Ok I don't want to start a flamewar but... Do we want to hold linux back until all binary only module vendors have caught up ??

#35 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 2 lines · Arjan van de Ven

Ok I don't want to start a flamewar but... Do we want to hold linux back until all binary only module vendors have caught up ??

No.. I merely suggested that coordinating with as few as possibly one vendor to clean their module up might minimize the pain considerably. NVidia is aware of the issue, and rumor has it that the 6xxx series of Linux drivers are targeted for the end of May and will have a fix for the 4K stack (which is an issue for the Fedora Core 2 release already) since they need to push out a revision to support the 6800 series cards anyhow....

#36 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 11 lines · [email protected] wrote:
Quoted 4 lines · Arjan van de Ven

Ok I don't want to start a flamewar but... Do we want to hold linux back until all binary only module vendors have caught up ??

No.. I merely suggested that coordinating with as few as possibly one vendor to clean their module up might minimize the pain considerably.

I don't see much of a problem. So what if Linus puts 4k stacks in 2.6.6 tomorrow? It won't kill linux for all those nvidia users. They'll simply have to stop at 2.6.5 until nvidia catch up. Not much of a problem, considering how the majority still runs various versions of 2.4.x.

Helge Hafting

#37 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

In reply to Arjan van de Ven
Quoted 2 lines · Arjan van de Ven

Ok I don't want to start a flamewar but... Do we want to hold linux back until all binary only module vendors have caught up ??

What about normal linux modules though? Eg, NFS (most likely):

	https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=121804

regards,

Signature · 5 lines
Paul Jakma	[email protected]	[email protected]	Key ID: 64A2FF6A
	warning: do not ever send email to [email protected]
Fortune:
Disraeli was pretty close: actually, there are Lies, Damn lies, Statistics,
Benchmarks, and Delivery dates.
#38 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 9 lines · Paul Jakma
Quoted 2 lines · Arjan van de Ven

Ok I don't want to start a flamewar but... Do we want to hold linux back until all binary only module vendors have caught up ??

What about normal linux modules though? Eg, NFS (most likely):

https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=121804

That's a misdiagnosis. The problem here is that the kernel is taking a pagefault within show_trace(), and the pagefault handler calls show_trace(). It has gone infinitely recursive.

The bug is unrelated to the stack size. It is in show_trace() or thereabouts. That code tries to protect itself from recursive faults, but it's a vendor kernel and may be different from the public tree.

#39 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 3 lines · Andrew Morton

That's a misdiagnosis. The problem here is that the kernel is taking a pagefault within show_trace(), and the pagefault handler calls show_trace(). It has gone infinitely recursive.

That happens after the initial stack overflow with a trace (from what i could discern before it scrolled into oblivion) in NFS -> IP path similar to the other non-recursive trace, see below.

Quoted 4 lines

The bug is unrelated to the stack size. It is in show_trace() or thereabouts. That code tries to protect itself from recursive faults, but it's a vendor kernel and may be different from the public tree.

Fair enough but have a look at the other fault from that bug though:

https://bugzilla.redhat.com/bugzilla/attachment.cgi?id=99855&action=view

That one did not recurse for some reason.

regards,

Signature · 4 lines
Paul Jakma	[email protected]	[email protected]	Key ID: 64A2FF6A
	warning: do not ever send email to [email protected]
Fortune:
The program isn't debugged until the last user is dead.
#40 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 6 lines · Paul Jakma

Fair enough but have a look at the other fault from that bug though:

https://bugzilla.redhat.com/bugzilla/attachment.cgi?id=99855&action=view

That one did not recurse for some reason.

OK.

So we're 50 to 60 levels deep in function calls there and simply ran out of 4k stack.

Based on this and upon the few other feedbackings I've had on this issue it seems that the 4k stack experiment will come back saying "no".

Thanks.

#41 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 4 lines · Andrew Morton
Quoted 3 lines · Paul Jakma

Fair enough but have a look at the other fault from that bug though:

Quoted 8 lines
Quoted 3 lines

https://bugzilla.redhat.com/bugzilla/attachment.cgi?id=99855&action=view

That one did not recurse for some reason.

OK.

So we're 50 to 60 levels deep in function calls there and simply ran out of 4k stack.

no that call trace is AFTER you overflow, eg wrong stack

#42 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

In reply to Andrew Morton

--Andrew Morton <[email protected]> wrote (on Thursday, May 06, 2004 20:58:38 -0700):

Quoted 8 lines
Quoted 6 lines · Paul Jakma

Fair enough but have a look at the other fault from that bug though:

https://bugzilla.redhat.com/bugzilla/attachment.cgi?id=99855&action=view

That one did not recurse for some reason.

Quoted 7 lines

OK.

So we're 50 to 60 levels deep in function calls there and simply ran out of 4k stack.

Based on this and upon the few other feedbackings I've had on this issue it seems that the 4k stack experiment will come back saying "no"

There's two problems with that stack ....

1. it seems to have the IRQ on it as well as normal traffic instead of using the separate irqstacks ... why isn't that working?

2 nfs_writepage_sync is a known stack-abuser ;-) 1632 bytes on PPC64 at least (from Anton's data). Maybe it's that struct nfs_write_data ?

M.

#43 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 3 lines · Martin J. Bligh

2 nfs_writepage_sync is a known stack-abuser ;-) 1632 bytes on PPC64 at least
(from Anton's data). Maybe it's that struct nfs_write_data ?

(from Anton's data). Maybe it's that struct nfs_write_data ?

fs/nfs/write.c renamed from fs/nfs/write.c~nfs_writepage_sync-stack-reduction +19 -12
diff -puN fs/nfs/write.c~nfs_writepage_sync-stack-reduction fs/nfs/write.c
@@ -179,7 +179,13 @@ static int nfs_writepage_sync(struct fil
 {
 	unsigned int	wsize = NFS_SERVER(inode)->wsize;
 	int		result, written = 0;
-	struct nfs_write_data	wdata = {
+	struct nfs_write_data *wdata;
+
+	wdata = kmalloc(sizeof(*wdata), GFP_NOFS);
+	if (!wdata)
+		return -ENOMEM;
+
+	*wdata = (struct nfs_write_data) {
 		.flags		= how,
 		.cred		= NULL,
 		.inode		= inode,
@@ -192,8 +198,8 @@ static int nfs_writepage_sync(struct fil
 			.count		= wsize,
 		},
 		.res		= {
-			.fattr		= &wdata.fattr,
-			.verf		= &wdata.verf,
+			.fattr		= &wdata->fattr,
+			.verf		= &wdata->verf,
 		},
 	};
 
@@ -205,22 +211,22 @@ static int nfs_writepage_sync(struct fil
 	nfs_begin_data_update(inode);
 	do {
 		if (count < wsize)
-			wdata.args.count = count;
-		wdata.args.offset = page_offset(page) + wdata.args.pgbase;
+			wdata->args.count = count;
+		wdata->args.offset = page_offset(page) + wdata->args.pgbase;
 
-		result = NFS_PROTO(inode)->write(&wdata, file);
+		result = NFS_PROTO(inode)->write(wdata, file);
 
 		if (result < 0) {
 			/* Must mark the page invalid after I/O error */
 			ClearPageUptodate(page);
 			goto io_error;
 		}
-		if (result < wdata.args.count)
+		if (result < wdata->args.count)
 			printk(KERN_WARNING "NFS: short write, count=%u, result=%d\n",
-					wdata.args.count, result);
+					wdata->args.count, result);
 
-		wdata.args.offset += result;
-	        wdata.args.pgbase += result;
+		wdata->args.offset += result;
+	        wdata->args.pgbase += result;
 		written += result;
 		count -= result;
 	} while (count);
@@ -234,9 +240,10 @@ static int nfs_writepage_sync(struct fil
 
 io_error:
 	nfs_end_data_update_defer(inode);
-	if (wdata.cred)
-		put_rpccred(wdata.cred);
+	if (wdata->cred)
+		put_rpccred(wdata->cred);
 
+	kfree(wdata);
 	return written ? written : result;
 }
 

_

#45 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 4 lines · Arjan van de Ven
Quoted 2 lines · Paul Jakma

On Thu, 6 May 2004, Arjan van de Ven wrote:

Quoted 8 lines
Quoted 6 lines
Quoted 2 lines

Ok I don't want to start a flamewar but... Do we want to hold linux back until all binary only module vendors have caught up ??

What about normal linux modules though? Eg, NFS (most likely):

	https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=121804

NFSv4 has a > 1Kb stack user; Dave Jones has a fix pending for that...

Hmm, this one maybe?

Dave

net/sunrpc/auth_gss/auth_gss.c renamed from net/sunrpc/auth_gss/auth_gss.c~ +13 -5
@@ -429,10 +429,8 @@ gss_pipe_upcall(struct file *filp, struc
 static ssize_t
 gss_pipe_downcall(struct file *filp, const char *src, size_t mlen)
 {
-	char buf[1024];
 	struct xdr_netobj obj = {
 		.len	= mlen,
-		.data	= buf,
 	};
 	struct inode *inode = filp->f_dentry->d_inode;
 	struct rpc_inode *rpci = RPC_I(inode);
@@ -448,11 +446,19 @@ gss_pipe_downcall(struct file *filp, con
 	int err;
 	int gss_err;
 
-	if (mlen > sizeof(buf))
+	obj.data = kmalloc(1024, GFP_KERNEL);
+	if (!obj.data)
+		return -ENOMEM;
+
+	if (mlen > 1024) {
+		kfree (obj.data);
 		return -ENOSPC;
-	left = copy_from_user(buf, src, mlen);
-	if (left)
+	}
+	left = copy_from_user(obj.data, src, mlen);
+	if (left) {
+		kfree (obj.data);
 		return -EFAULT;
+	}
 	clnt = rpci->private;
 	atomic_inc(&clnt->cl_users);
 	auth = clnt->cl_auth;
@@ -477,12 +483,14 @@ gss_pipe_downcall(struct file *filp, con
 	} else
 		spin_unlock(&gss_auth->lock);
 	rpc_release_client(clnt);
+	kfree (obj.data);
 	return mlen;
 err:
 	if (ctx)
 		gss_destroy_ctx(ctx);
 	rpc_release_client(clnt);
 	dprintk("RPC: gss_pipe_downcall returning %d\n", err);
+	kfree (obj.data);
 	return err;
 }
 
#46 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 20 lines · Dave Jones
Quoted 4 lines · Arjan van de Ven
Quoted 2 lines · Paul Jakma

On Thu, 6 May 2004, Arjan van de Ven wrote:

Quoted 8 lines
Quoted 6 lines
Quoted 2 lines

Ok I don't want to start a flamewar but... Do we want to hold linux back until all binary only module vendors have caught up ??

What about normal linux modules though? Eg, NFS (most likely):

	https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=121804

NFSv4 has a > 1Kb stack user; Dave Jones has a fix pending for that...

Hmm, this one maybe?

Dave

net/sunrpc/auth_gss/auth_gss.c gss_pipe_downcall(struct file *filp, con · line 453

Quoted 6 lines
net/sunrpc/auth_gss/auth_gss.c renamed from net/sunrpc/auth_gss/auth_gss.c~ +5 -1
-	if (mlen > sizeof(buf))
+	obj.data = kmalloc(1024, GFP_KERNEL);
+	if (!obj.data)
+		return -ENOMEM;
+
+	if (mlen > 1024) {

That's what I hate about all of this, just think how much stack that kmalloc can take in low memory situations.... it might end up in writepage on another nfs file.... Moving stuff off the stack and into kmalloc just reduces the possibility of stack overflow, it does not fix the problem. Having memory reclaim take place inside the thread which is waiting for memory makes that a pretty hard problem to fix.

Steve

#47 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 10 lines · Steve Lord

net/sunrpc/auth_gss/auth_gss.c gss_pipe_downcall(struct file *filp, con · line 453

Quoted 6 lines
net/sunrpc/auth_gss/auth_gss.c renamed from net/sunrpc/auth_gss/auth_gss.c~ +5 -1
-	if (mlen > sizeof(buf))
+	obj.data = kmalloc(1024, GFP_KERNEL);
+	if (!obj.data)
+		return -ENOMEM;
+
+	if (mlen > 1024) {

That's what I hate about all of this, just think how much stack that kmalloc can take in low memory situations.... it might end up in writepage on another nfs file....

it clearly needs to be GFP_NOFS

#48 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 12 lines · Arjan van de Ven
Quoted 10 lines · Steve Lord

net/sunrpc/auth_gss/auth_gss.c gss_pipe_downcall(struct file *filp, con · line 453

Quoted 6 lines
net/sunrpc/auth_gss/auth_gss.c renamed from net/sunrpc/auth_gss/auth_gss.c~ +5 -1
-	if (mlen > sizeof(buf))
+	obj.data = kmalloc(1024, GFP_KERNEL);
+	if (!obj.data)
+		return -ENOMEM;
+
+	if (mlen > 1024) {

That's what I hate about all of this, just think how much stack that kmalloc can take in low memory situations.... it might end up in writepage on another nfs file....

Quoted 1 line

it clearly needs to be GFP_NOFS

The function is question is essentially a write method for a virtual filesystem (rpc_pipefs) that's used to communicate with some NFSv4-related daemons. It isn't called from any of the NFS fileystem code.

--Bruce Fields

#49 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

In reply to Arjan van de Ven
Quoted 14 lines · Arjan van de Ven
Quoted 10 lines · Steve Lord

net/sunrpc/auth_gss/auth_gss.c gss_pipe_downcall(struct file *filp, con · line 453

Quoted 6 lines
net/sunrpc/auth_gss/auth_gss.c renamed from net/sunrpc/auth_gss/auth_gss.c~ +5 -1
-	if (mlen > sizeof(buf))
+	obj.data = kmalloc(1024, GFP_KERNEL);
+	if (!obj.data)
+		return -ENOMEM;
+
+	if (mlen > 1024) {

That's what I hate about all of this, just think how much stack that kmalloc can take in low memory situations.... it might end up in writepage on another nfs file....

Quoted 1 line

it clearly needs to be GFP_NOFS

That was not really my point, consider any memory allocation on the stack which is being replaced with an allocate to save space. Then replace the saved stack space with the potential stack space used to free memory by writing it out via a filesystem. You cannot make all the allocations in the kernel GFP_NOFS.

Now at least if the memory is allocated high enough up in the call chain it fixes the problems of a function with a large stack frame with a deep stack underneath it. It does not fix anything if the function is already deep in the stack.

All this is doing is papering over the cracks.

Steve

#50 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 7 lines · Steve Lord

That was not really my point, consider any memory allocation on the stack which is being replaced with an allocate to save space. Then replace the saved stack space with the potential stack space used to free memory by writing it out via a filesystem. You cannot make all the allocations in the kernel GFP_NOFS.

Quoted 6 lines

Now at least if the memory is allocated high enough up in the call chain it fixes the problems of a function with a large stack frame with a deep stack underneath it. It does not fix anything if the function is already deep in the stack.

All this is doing is papering over the cracks.

No, it turns two problems into one. We have the problem you describe anyway, there is no point avoiding it here. It remains unsolved, but that's just one problem left, not two.

Would it make sense to switch stacks if memory allocation has to free other memory first? Sounds a bit insane, but that problem needs a solution as well.

Jörn

Signature · 2 lines
...one more straw can't possibly matter...
-- Kirby Bakken
#52 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 6 lines · Paul Jakma
Quoted 2 lines · Arjan van de Ven

NFSv4 has a > 1Kb stack user; Dave Jones has a fix pending for that...

I'm using NFSv3 though.

Well.. the mount itself is NFSv3 at least. The kernel does however have NFSv4 client support and support for the rpc_pipefs fs.

regards,

Signature · 5 lines
Paul Jakma	[email protected]	[email protected]	Key ID: 64A2FF6A
	warning: do not ever send email to [email protected]
Fortune:
Forgive and forget.
		-- Cervantes
#53 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

In reply to Arjan van de Ven
Quoted 7 lines · Arjan van de Ven
Quoted 3 lines

It's probably a Bad Idea to push this to Linus before the vendors that have significant market-impact issues (again - anybody other than NVidia here?) have gotten their stuff cleaned up...

Ok I don't want to start a flamewar but... Do we want to hold linux back until all binary only module vendors have caught up ??

My questions is, hold it back from what? Having the 4k option is fine, it's just eliminating the current default which I think is undesirable. I tried 4k stack, I couldn't measure any improvement in anything (as in no visible speedup or saving in memory). For an embedded system, where space is tight and the code paths well known, sure, but I haven't been able to find or generate any objective improvement, other than some posts saying smaller is always better. Nothing slows a system down like a crash, even if it isn't followed by a restore from backup.

Feel free to point me at some results showing major improvement from 4k stacks, I'm open to data.

Signature · 3 lines
   -bill davidsen ([email protected])
"The secret to procrastination is to put things off until the
 last possible moment - but no longer"  -me
#54 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Bill Davidsen <[email protected]> said:

[...]

Quoted 2 lines

I tried 4k stack, I couldn't measure any improvement in anything (as in no visible speedup or saving in memory).

4K stacks lets the kernel create new threads/processes as long as there is free memory; with 8K stacks it needs two consecutive free page frames in physical memory, when memory is fragmented (and large) they are hard to come by...

Signature · 4 lines
Dr. Horst H. von Brand                   User #22616 counter.li.org
Departamento de Informatica                     Fono: +56 32 654431
Universidad Tecnica Federico Santa Maria              +56 32 654239
Casilla 110-V, Valparaiso, Chile                Fax:  +56 32 797513
#55 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 5 lines · Horst von Brand

Bill Davidsen <[email protected]> said:

[...]

Quoted 7 lines
Quoted 2 lines

I tried 4k stack, I couldn't measure any improvement in anything (as in no visible speedup or saving in memory).

4K stacks lets the kernel create new threads/processes as long as there is free memory; with 8K stacks it needs two consecutive free page frames in physical memory, when memory is fragmented (and large) they are hard to come by...

This is true to a surprising extent. A couple of weeks ago I observed my 256MB box freeing over 20MB of pages before it could successfully acquire a single 1-order page.

That was during an updatedb run.

And a 1-order GFP_NOFS allocation was actually livelocking, because !__GFP_FS allocations aren't allowed to enter dentry reclaim. Which is why VFS caches are now forced to use 0-order allocations.

#56 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

In reply to Bill Davidsen
Quoted 8 lines · Bill Davidsen
Quoted 6 lines · Arjan van de Ven
Quoted 3 lines

It's probably a Bad Idea to push this to Linus before the vendors that have significant market-impact issues (again - anybody other than NVidia here?) have gotten their stuff cleaned up...

Quoted 5 lines
Quoted 2 lines

Ok I don't want to start a flamewar but... Do we want to hold linux back until all binary only module vendors have caught up ??

My questions is, hold it back from what? Having the 4k option is fine, it's just eliminating the current default which I think is undesirable. I tried 4k stack, I couldn't measure any improvement in anything (as in no visible speedup or saving in memory).

The memory saving is usually modest: 4k per thread. It might make a difference for
those with many thousands of threads. I believe this is unswappable memory,
which is much more valuable than ordinary process memory.

More interesting is that it removes one way for fork() to fail. With 8k stacks, the new process needs to allocate two consecutive pages for those 8k. That might be impossible due to fragmentation, even if there are megabytes of free memory. Such a problem usually only shows up after a long time. Now we only need to allocate a single page, which always works as long as there is any free memory at all.

Quoted 1 line

For an embedded system, where space is tight and the code paths well known, sure, but I haven't been able to find or generate any objective improvement, other than some posts saying smaller is always better. Nothing slows a system down like a crash, even if it isn't followed by a restore from backup.

Consider the case when your server (web/mail/other) fails to fork, and then you can't login because that requires fork() too. 4k stacks remove this scenario, and is a stability improvement.

Helge Hafting

#57 lore raw

Re: several messages

Thank all of you for this information. This is an interesting way to overcome the kernel memory fragmentation issue. I would have thought it was more important to address having the memory so fragmented that there is no 8k chunk left "even with many megabytes free" as someone wrote.

Quoted 17 lines · Horst von Brand

Bill Davidsen <[email protected]> said:

[...]

Quoted 2 lines

I tried 4k stack, I couldn't measure any improvement in anything (as in no visible speedup or saving in memory).

4K stacks lets the kernel create new threads/processes as long as there is free memory; with 8K stacks it needs two consecutive free page frames in physical memory, when memory is fragmented (and large) they are hard to come by...

Signature · 4 lines
Dr. Horst H. von Brand                   User #22616 counter.li.org
Departamento de Informatica                     Fono: +56 32 654431
Universidad Tecnica Federico Santa Maria              +56 32 654239
Casilla 110-V, Valparaiso, Chile                Fax:  +56 32 797513
Quoted 25 lines · Andrew Morton
Quoted 5 lines · Horst von Brand

Bill Davidsen <[email protected]> said:

[...]

Quoted 7 lines
Quoted 2 lines

I tried 4k stack, I couldn't measure any improvement in anything (as in no visible speedup or saving in memory).

4K stacks lets the kernel create new threads/processes as long as there is free memory; with 8K stacks it needs two consecutive free page frames in physical memory, when memory is fragmented (and large) they are hard to come by...

This is true to a surprising extent. A couple of weeks ago I observed my 256MB box freeing over 20MB of pages before it could successfully acquire a single 1-order page.

That was during an updatedb run.

And a 1-order GFP_NOFS allocation was actually livelocking, because !__GFP_FS allocations aren't allowed to enter dentry reclaim. Which is why VFS caches are now forced to use 0-order allocations.

Quoted 50 lines · Helge Hafting
Quoted 10 lines · Bill Davidsen
Quoted 8 lines · Arjan van de Ven
Quoted 5 lines

It's probably a Bad Idea to push this to Linus before the vendors that have
significant market-impact issues (again - anybody other than NVidia here?)
have gotten their stuff cleaned up...

Quoted 8 lines
Quoted 2 lines

Ok I don't want to start a flamewar but... Do we want to hold linux back until all binary only module vendors have caught up ??

My questions is, hold it back from what? Having the 4k option is fine, it's just eliminating the current default which I think is undesirable. I tried 4k stack, I couldn't measure any improvement in anything (as in no visible speedup or saving in memory).

The memory saving is usually modest: 4k per thread. It might make a difference for
those with many thousands of threads. I believe this is unswappable
memory,
which is much more valuable than ordinary process memory.

More interesting is that it removes one way for fork() to fail. With 8k stacks,
the new process needs to allocate two consecutive pages for those 8k. That might be impossible due to fragmentation, even if there are megabytes of free
memory. Such a problem usually only shows up after a long time. Now we only need to
allocate a single page, which always works as long as there is any free memory at all.

Quoted 5 lines

For an embedded system, where space is tight and the code paths well known, sure, but I haven't been able to find or generate any objective improvement, other than some posts saying smaller is always better. Nothing slows a system down like a crash, even if it isn't followed by a restore from backup.

Consider the case when your server (web/mail/other) fails to fork, and then you can't login because that requires fork() too. 4k stacks remove this scenario,
and is a stability improvement.

Helge Hafting

Signature · 3 lines
bill davidsen <[email protected]>
  CTO, TMR Associates, Inc
Doing interesting things with little computers since 1979.
#58 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

In reply to [email protected]
Quoted 13 lines · On Thu, 06 May 2004 11:18:10 -0400 [email protected] wrote:
Quoted 2 lines · On Wed, 05 May 2004 23:51:36 +0200, =?iso-8859-1?Q?J=F6rn?= Engel said:

I disagree. -mm is the testing ground for -linus. If this patch would only break the nvidia module, I couldn't care less.

OK.. I need to clarify - I'm OK on the patch being *in -mm* precisely *because* it's a testing ground. Anybody who's running a -mm kernel should have the technical savvy to deal with the issue by reverting the one patch in question, and to recover if it eats their file system (Yes, I'm running 2.6.6-rc3-mm2 and the NVidia driver as I type. No, making it work wasn't a problem. Yes, I spin everything needed to rebuild out to CD/RW at least once a week, just because it *is* a -mm kernel. ;)

Quoted 3 lines

It's a Good Idea to do this in -mm, to flush out all the binary modules that are known to have issues with this (have we identified anybody other than NVidia that actually *has* a problem)?

I use 2.6.6-rc3 w/ 4k-stack enabled (-mm is a bit too experimental for my taste ;) ), ATIs binary-module is working w/o problems. but IIRC I had to disable REGPARMS.

Quoted 6 lines

It's probably a Bad Idea to push this to Linus before the vendors that have significant market-impact issues (again - anybody other than NVidia here?) have gotten their stuff cleaned up...

Signature · 5 lines
---------------------------------------
Malte Schröder
[email protected]
ICQ# 68121508
---------------------------------------
#59 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

Quoted 3 lines · On Thu, 06 May 2004 18:03:14 +0200, Malte =?ISO-8859-1?B?U2NocvZkZXI=?= said:

I use 2.6.6-rc3 w/ 4k-stack enabled (-mm is a bit too experimental for my = taste ;) ), ATIs binary-module is working w/o problems.
but IIRC I had to disable REGPARMS.

Alternatively, www.minion.de has a patch against the 5341 drivers that makes it work with the regparms (basically, it sticks an asmlinkage in all the right places)....

http://www.minion.de/files/NVIDIA_kernel-1.0-5341-2.6.diff

Of course, if you hit problems running a 3rd party patch against a mostly-binary driver, you're on your own... ;)

#60 lore raw

Re: 2.6.6-rc3-mm2 (4KSTACK)

In reply to [email protected]
Quoted 3 lines · On Thu, May 06, 2004 at 11:18:10AM -0400, [email protected] wrote:

It's a Good Idea to do this in -mm, to flush out all the binary modules that are known to have issues with this (have we identified anybody other than NVidia that actually *has* a problem)?

Anything that uses current() or the like will be unhappy, though it may work half the time. So just about anything binary-only is liable to hit it. We can catch most of this by adding "4KSTACKS" to the global build flags, but I think stuff like the Nvidia wrapper layer shoots itself in the foot here by silently ignoring this check.

Signature · 1 line
Matt Mackall : http://www.selenic.com : Linux development and consulting
#61 lore raw

Re: 2.6.6-rc3-mm2 [delete-posix-...-unifix-message]

In reply to Andrew Morton

The broken out patch:

delete-posix-conformance-testing-by-unifix-message.patch

is empty, except for the comment.

The actual change is missing in:

1) the ftp directory 2.6.6-rc3-mm2/broken-out
2) the broken-out tarball 2.6.6-rc3-mm2-broken-out.tar.bz2
3) the monolithich patch 2.6.6-rc3-mm2.bz2

Presumably something like the following patch is intended:

========================== begin snip ==========================
From: "Randy.Dunlap" <[email protected]>

There is a general desire to reduce the quantity of noisy and/or outdated kernel boot-time messages...

Suggested by Andi Kleen.

Ulrich's (old) comments:
http://www.nsa.gov/selinux/list-archive/0107/0525.cfm

Certifying Linux (Linux Journal):
http://www.linuxjournal.com/article.php?sid=0131

init/main.c +0 -1
Index: 2.6.6-rc3-mm2/init/main.c
===================================================================
@@ -521,7 +521,6 @@
 	proc_root_init();
 #endif
 	check_bugs();
-	printk("POSIX conformance testing by UNIFIX\n");
 
 	/* 
 	 *	We count on the initial thread going ok 

========================== end snip ==========================

Signature · 3 lines
                          I won't rest till it's the best ...
                          Programmer, Linux Scalability
                          Paul Jackson <[email protected]> 1.650.933.1373
#62 lore raw
In reply to Andrew Morton
Quoted 3 lines · Andrew Morton

static-define_per_cpu-vs-modules-2.patch

Work around relative address displacement problems on s390.

I'm not happy with this one. It prevents perfectly valid optimizations that become more important with modern compilers because of s390 brokenness.

Of the options listed in the patch description (why the heck didn't it ever make it to a mailinglist??) the options to avoid the static effect in s390 code looks most appealing but hard to implement to me, and if it doesn't work out we'll probably have to do the STATIC_DEFINE_PER_CPU variant.

#63 lore raw
Quoted 5 lines · Christoph Hellwig
Quoted 3 lines · Andrew Morton

static-define_per_cpu-vs-modules-2.patch

Work around relative address displacement problems on s390.

Quoted 7 lines

I'm not happy with this one. It prevents perfectly valid optimizations that become more important with modern compilers because of s390 brokenness.

Of the options listed in the patch description (why the heck didn't it ever make it to a mailinglist??) the options to avoid the static effect in s390 code looks most appealing but hard to implement to me, and if it doesn't work out we'll probably have to do the STATIC_DEFINE_PER_CPU variant.

When I prepared that patch, I was certain that the bug was not s390 specific, as it now turned out to be. The reason is that only on s390, the kernel virtual address space for builtin code is the same as the physical address space while modules are loaded to the vmalloc area, which may be >32 bit apart.

For exported symbols, we work around this by compiling modules with -fpic, which does not work for per_cpu relocations.

Martin was now able to do a similar workaround for these by loading the address through inline assembly without affecting the other architectures, following a suggestion by Richard Henderson. This is his patch:

Force the use of a 64 bit relocation to access the per_cpu__##var variables and fix a problem in the module loader regarding GOTENT and GOTPLTENT relocs.

arch/s390/kernel/module.c +2 -1
diff -urN linux-2.6/arch/s390/kernel/module.c linux-2.6-s390/arch/s390/kernel/module.c
@@ -277,7 +277,8 @@
 			*(unsigned int *) loc = val;
 		else if (r_type == R_390_GOTENT ||
 			 r_type == R_390_GOTPLTENT)
-			*(unsigned int *) loc = val >> 1;
+			*(unsigned int *) loc =
+				(val + (Elf_Addr) me->module_core - loc) >> 1;
 		else if (r_type == R_390_GOT64 ||
 			 r_type == R_390_GOTPLT64)
 			*(unsigned long *) loc = val;
include/asm-s390/percpu.h +18 -2
diff -urN linux-2.6/include/asm-s390/percpu.h linux-2.6-s390/include/asm-s390/percpu.h
@@ -5,10 +5,26 @@
 #include <asm/lowcore.h>
 
 /*
- * s390 uses the generic implementation for per cpu data, with the exception that
- * the offset of the cpu local data area is cached in the cpu's lowcore memory
+ * For builtin kernel code s390 uses the generic implementation for
+ * per cpu data, with the exception that the offset of the cpu local
+ * data area is cached in the cpu's lowcore memory
+ * For 64 bit module code s390 forces the use of a GOT slot for the
+ * address of the per cpu variable. This is needed because the module
+ * may be more than 4G above the per cpu area.
  */
+#if defined(__s390x__) && defined(MODULE)
+#define __get_got_cpu_var(var,offset) \
+  (*({ unsigned long *__ptr; \
+       asm ( "larl %0,per_cpu__"#var"@GOTENT" : "=a" (__ptr) ); \
+       ((typeof(&per_cpu__##var))((*__ptr) + offset)); \
+    }))
+#undef __get_cpu_var
+#define __get_cpu_var(var) __get_got_cpu_var(var,S390_lowcore.percpu_offset)
+#undef per_cpu
+#define per_cpu(var,cpu) __get_got_cpu_var(var,__per_cpu_offset[cpu])
+#else
 #undef __get_cpu_var
 #define __get_cpu_var(var) (*RELOC_HIDE(&per_cpu__##var, S390_lowcore.percpu_offset))
+#endif
 
 #endif /* __ARCH_S390_PERCPU__ */
#64 lore raw
In reply to Andrew Morton

This doesn't build for ia64 sn2_defconfig (probably not for numa in general). One of Andi's patches, numa-api-vma-policy-hooks.patch, is missing four #includes of linux/mempolicy.h.

I have posted an updated version of that patch on Andi's numa thread of a month ago - cc'd to akpm.

With this updated patch, this configuration builds.

Signature · 3 lines
                          I won't rest till it's the best ...
                          Programmer, Linux Scalability
                          Paul Jackson <[email protected]> 1.650.933.1373
#65 lore raw
Quoted 3 lines · Paul Jackson

This doesn't build for ia64 sn2_defconfig (probably not for numa in general). One of Andi's patches, numa-api-vma-policy-hooks.patch, is missing four #includes of linux/mempolicy.h.

That's actually my fault most likely. The removal of mempolicy.h from sched.h and mm.h will need adjustments in quite a few arch files.

#66 lore raw
Quoted 1 line

That's actually my fault most likely.

Aha - we just arrived at the same conclusion - must be right ;).

Signature · 3 lines
                          I won't rest till it's the best ...
                          Programmer, Linux Scalability
                          Paul Jackson <[email protected]> 1.650.933.1373
#67 lore raw
In reply to Paul Jackson
Quoted 8 lines · Paul Jackson

This doesn't build for ia64 sn2_defconfig (probably not for numa in general). One of Andi's patches, numa-api-vma-policy-hooks.patch, is missing four #includes of linux/mempolicy.h.

I have posted an updated version of that patch on Andi's numa thread of a month ago - cc'd to akpm.

With this updated patch, this configuration builds.

Can you, please, send it again? I can't find that one (well, my fault, but anyway ...),

RJW

Signature · 7 lines
Rafael J. Wysocki,
SiSK
[tel. (+48) 605 053 693]
----------------------------
For a successful technology, reality must take precedence over public 
relations, for nature cannot be fooled.
					-- Richard P. Feynman
#68 lore raw
Quoted 1 line

Can you, please, send it again?

I was asleep - sorry. Looks like Andrew already replied to another query from yourself related to this, 5 or 6 hours ago, with the proper patch - adding some #include's of linux/mempolicy.h.

Are you ok now?

Signature · 3 lines
                          I won't rest till it's the best ...
                          Programmer, Linux Scalability
                          Paul Jackson <[email protected]> 1.650.933.1373
#69 lore raw
Quoted 7 lines · Paul Jackson
Quoted 1 line

Can you, please, send it again?

I was asleep - sorry. Looks like Andrew already replied to another query from yourself related to this, 5 or 6 hours ago, with the proper patch - adding some #include's of linux/mempolicy.h.

Are you ok now?

Yes, I am (sorry, I couldn't confirm this earlier).

Signature · 7 lines
Rafael J. Wysocki,
SiSK
[tel. (+48) 605 053 693]
----------------------------
For a successful technology, reality must take precedence over public 
relations, for nature cannot be fooled.
					-- Richard P. Feynman
#70 lore raw

Re: 2.6.6-rc3-mm2 (compile stats)

In reply to Andrew Morton

Linux 2.6 (mm tree) Compile Statistics (gcc 3.2.2) Warnings/Errors Summary

Kernel bzImage bzImage bzImage modules bzImage modules
(defconfig) (allno) (allyes) (allyes) (allmod) (allmod)
--------------- ---------- -------- -------- -------- -------- --------

2.6.6-rc3-mm2     0w/0e     0w/0e   117w/ 0e   8w/0e   2w/0e    116w/0e
2.6.6-rc3-mm1     0w/0e     0w/0e   120w/10e   8w/0e   2w/0e    152w/2e
2.6.6-rc2-mm2     0w/0e     1w/5e   118w/ 0e   8w/0e   3w/0e    118w/0e
2.6.6-rc2-mm1     0w/0e     0w/0e   115w/ 0e   7w/0e   3w/0e    116w/0e
2.6.6-rc1-mm1     0w/0e     0w/7e   122w/ 0e   7w/0e   4w/0e    122w/0e
2.6.5-mm6         0w/0e     0w/0e   123w/ 0e   7w/0e   4w/0e    124w/0e
2.6.5-mm5         0w/0e     0w/0e   119w/ 0e   7w/0e   4w/0e    120w/0e
2.6.5-mm4         0w/0e     0w/0e   120w/ 0e   7w/0e   4w/0e    121w/0e
2.6.5-mm3         0w/0e     1w/0e   121w/12e   7w/0e   3w/0e    123w/0e
2.6.5-mm2         0w/0e     0w/0e   128w/12e   7w/0e   3w/0e    134w/0e
2.6.5-mm1         0w/0e     5w/0e   122w/ 0e   7w/0e   3w/0e    124w/0e
2.6.5-rc3-mm4     0w/0e     0w/0e   124w/ 0e   8w/0e   4w/0e    126w/0e
2.6.5-rc3-mm3     0w/0e     5w/0e   129w/14e   8w/0e   4w/0e    129w/6e
2.6.5-rc3-mm2     0w/0e     5w/0e   130w/14e   8w/0e   4w/0e    129w/6e
2.6.5-rc3-mm1     0w/0e     5w/0e   129w/ 0e   8w/0e   4w/0e    129w/0e
2.6.5-rc2-mm5     0w/0e     5w/0e   130w/ 0e   8w/0e   4w/0e    129w/0e
2.6.5-rc2-mm4     0w/0e     5w/0e   134w/ 0e   8w/0e   3w/0e    133w/0e
2.6.5-rc2-mm3     0w/0e     5w/0e   134w/ 0e   8w/0e   3w/0e    133w/0e
2.6.5-rc2-mm2     0w/0e     5w/0e   137w/ 0e   8w/0e   3w/0e    134w/0e
2.6.5-rc2-mm1     0w/0e     5w/0e   136w/ 0e   8w/0e   3w/0e    134w/0e
2.6.5-rc1-mm2     0w/0e     5w/0e   135w/ 5e   8w/0e   3w/0e    133w/0e
2.6.5-rc1-mm1     0w/0e     5w/0e   135w/ 5e   8w/0e   3w/0e    133w/0e
2.6.4-mm2         1w/2e     5w/2e   144w/10e   8w/0e   3w/2e    144w/0e
2.6.4-mm1         1w/0e     5w/0e   146w/ 5e   8w/0e   3w/0e    144w/0e
2.6.4-rc2-mm1     1w/0e     5w/0e   146w/12e  11w/0e   3w/0e    147w/2e
2.6.4-rc1-mm2     1w/0e     5w/0e   144w/ 0e  11w/0e   3w/0e    145w/0e
2.6.4-rc1-mm1     1w/0e     5w/0e   147w/ 5e  11w/0e   3w/0e    147w/0e
2.6.3-mm4         1w/0e     5w/0e   146w/ 0e   7w/0e   3w/0e    142w/0e
2.6.3-mm3         1w/2e     5w/2e   146w/15e   7w/0e   3w/2e    144w/5e
2.6.3-mm2         1w/8e     5w/0e   140w/ 0e   7w/0e   3w/0e    138w/0e
2.6.3-mm1         1w/0e     5w/0e   143w/ 5e   7w/0e   3w/0e    141w/0e
2.6.3-rc3-mm1     1w/0e     0w/0e   144w/13e   7w/0e   3w/0e    142w/3e
2.6.3-rc2-mm1     1w/0e     0w/265e 144w/ 5e   7w/0e   3w/0e    145w/0e
2.6.3-rc1-mm1     1w/0e     0w/265e 141w/ 5e   7w/0e   3w/0e    143w/0e
2.6.2-mm1         2w/0e     0w/264e 147w/ 5e   7w/0e   3w/0e    173w/0e
2.6.2-rc3-mm1     2w/0e     0w/265e 146w/ 5e   7w/0e   3w/0e    172w/0e
2.6.2-rc2-mm2     0w/0e     0w/264e 145w/ 5e   7w/0e   3w/0e    171w/0e
2.6.2-rc2-mm1     0w/0e     0w/264e 146w/ 5e   7w/0e   3w/0e    172w/0e
2.6.2-rc1-mm3     0w/0e     0w/265e 144w/ 8e   7w/0e   3w/0e    169w/0e
2.6.2-rc1-mm2     0w/0e     0w/264e 144w/ 5e  10w/0e   3w/0e    171w/0e
2.6.2-rc1-mm1     0w/0e     0w/264e 144w/ 5e  10w/0e   3w/0e    171w/0e
2.6.1-mm5         2w/5e     0w/264e 153w/11e  10w/0e   3w/0e    180w/0e
2.6.1-mm4         0w/821e   0w/264e 154w/ 5e   8w/1e   5w/0e    179w/0e
2.6.1-mm3         0w/0e     0w/0e   151w/ 5e  10w/0e   3w/0e    177w/0e
2.6.1-mm2         0w/0e     0w/0e   143w/ 5e  12w/0e   3w/0e    171w/0e
2.6.1-mm1         0w/0e     0w/0e   146w/ 9e  12w/0e   6w/0e    171w/0e
2.6.1-rc2-mm1     0w/0e     0w/0e   149w/ 0e  12w/0e   6w/0e    171w/4e
2.6.1-rc1-mm2     0w/0e     0w/0e   157w/15e  12w/0e   3w/0e    185w/4e
2.6.1-rc1-mm1     0w/0e     0w/0e   156w/10e  12w/0e   3w/0e    184w/2e
2.6.0-mm2         0w/0e     0w/0e   161w/ 0e  12w/0e   3w/0e    189w/0e
2.6.0-mm1         0w/0e     0w/0e   173w/ 0e  12w/0e   3w/0e    212w/0e

Web page with links to complete details:
http://developer.osdl.org/cherry/compile/

John

#71 lore raw

Re: 2.6.6-rc3-mm2 [sparc, sparc64, mips syscall broken]

In reply to Andrew Morton

She doesn't build for sparc64 either (using crosstool). And I'd wager a pretty penny this applies to sparc and mips as well.

The patch kernel-syscalls-retval-fix.patch is missing a bunch of semicolons. Several lines that look like:

	__syscall_return(type, __res) \

should instead be:

	__syscall_return(type, __res); \

Here's the 2.6.6-rc3-mm2 kernel-syscalls-retval-fix.patch updated with this change, for all three sparc, sparc64, and mips. I am only able to test build sparc64, and unable to test boot any of this. With this change, sparc64 built.

============================ snip ============================

include/asm-alpha/unistd.h +4 -0
Index: 2.6.6-rc3-mm2/include/asm-alpha/unistd.h
===================================================================
@@ -378,8 +378,12 @@
 
 #if defined(__GNUC__)
 
+#ifdef __KERNEL__
+#define _syscall_return(type)	return ((type) _sc_ret)
+#else
 #define _syscall_return(type)						\
 	return (_sc_err ? errno = _sc_ret, _sc_ret = -1L : 0), (type) _sc_ret
+#endif
 
 #define _syscall_clobbers						\
 	"$1", "$2", "$3", "$4", "$5", "$6", "$7", "$8",			\
include/asm-arm26/unistd.h +4 -0
Index: 2.6.6-rc3-mm2/include/asm-arm26/unistd.h
===================================================================
@@ -277,6 +277,9 @@
 #define __syscall(name) "swi\t" __sys1(__NR_##name) "\n\t"
 #endif
 
+#ifdef __KERNEL__
+#define __syscall_return(type, res) return ((type)(res))
+#else
 #define __syscall_return(type, res)					\
 do {									\
 	if ((unsigned long)(res) >= (unsigned long)(-125)) {		\
@@ -285,6 +288,7 @@
 	}								\
 	return (type) (res);						\
 } while (0)
+#endif
 
 #define _syscall0(type,name)						\
 type name(void) {							\
include/asm-arm/unistd.h +4 -0
Index: 2.6.6-rc3-mm2/include/asm-arm/unistd.h
===================================================================
@@ -324,6 +324,9 @@
 #endif
 #endif
 
+#ifdef __KERNEL__
+#define __syscall_return(type, res) return ((type)(res))
+#else
 #define __syscall_return(type, res)					\
 do {									\
 	if ((unsigned long)(res) >= (unsigned long)(-125)) {		\
@@ -332,6 +335,7 @@
 	}								\
 	return (type) (res);						\
 } while (0)
+#endif
 
 #define _syscall0(type,name)						\
 type name(void) {							\
include/asm-h8300/unistd.h +4 -0
Index: 2.6.6-rc3-mm2/include/asm-h8300/unistd.h
===================================================================
@@ -276,6 +276,9 @@
 /* user-visible error numbers are in the range -1 - -122: see
    <asm-m68k/errno.h> */
 
+#ifdef __KERNEL__
+#define __syscall_return(type, res) return ((type)(res))
+#else
 #define __syscall_return(type, res) \
 do { \
 	if ((unsigned long)(res) >= (unsigned long)(-125)) { \
@@ -287,6 +290,7 @@
 	} \
 	return (type) (res); \
 } while (0)
+#endif
 
 #define _syscall0(type, name)							\
 type name(void)									\
include/asm-i386/unistd.h +4 -0
Index: 2.6.6-rc3-mm2/include/asm-i386/unistd.h
===================================================================
@@ -293,6 +293,9 @@
 
 /* user-visible error numbers are in the range -1 - -124: see <asm-i386/errno.h> */
 
+#ifdef __KERNEL__
+#define __syscall_return(type, res) return ((type)(res))
+#else
 #define __syscall_return(type, res) \
 do { \
 	if ((unsigned long)(res) >= (unsigned long)(-125)) { \
@@ -301,6 +304,7 @@
 	} \
 	return (type) (res); \
 } while (0)
+#endif
 
 /* XXX - _foo needs to be __foo, while __NR_bar could be _NR_bar. */
 #define _syscall0(type,name) \
include/asm-m68knommu/unistd.h +11 -34

94 lines not on this page · raw message

include/asm-m68k/unistd.h +4 -0
Index: 2.6.6-rc3-mm2/include/asm-m68k/unistd.h
===================================================================
@@ -244,6 +244,9 @@
 /* user-visible error numbers are in the range -1 - -124: see
    <asm-m68k/errno.h> */
 
+#ifdef __KERNEL__
+#define __syscall_return(type, res) return ((type)(res))
+#else
 #define __syscall_return(type, res) \
 do { \
 	if ((unsigned long)(res) >= (unsigned long)(-125)) { \
@@ -255,6 +258,7 @@
 	} \
 	return (type) (res); \
 } while (0)
+#endif
 
 #define _syscall0(type,name) \
 type name(void) \
include/asm-mips/unistd.h +19 -36

115 lines not on this page · raw message

include/asm-parisc/unistd.h +12 -5
Index: 2.6.6-rc3-mm2/include/asm-parisc/unistd.h
===================================================================
@@ -739,6 +739,17 @@
 
 #define SYS_ify(syscall_name)   __NR_##syscall_name
 
+#ifdef __KERNEL__
+#define __syscall_return __sys_res
+#else
+#define __syscall_return					\
+        if (__sys_res >= (unsigned long)-4095) {		\
+		errno = -__sys_res;				\
+                __sys_res = (unsigned long)-1;			\
+        }							\
+        __sys_res;						\
+#endif
+
 /* The system call number MUST ALWAYS be loaded in the delay slot of
    the ble instruction, or restarting system calls WILL NOT WORK.  See
    arch/parisc/kernel/signal.c - dhd, 2000-07-26 */
@@ -755,11 +766,7 @@
 			  );                                    \
                 __sys_res = __res;                              \
         }                                                       \
-        if (__sys_res >= (unsigned long)-4095) {                \
-		errno = -__sys_res;				\
-                __sys_res = (unsigned long)-1;                 \
-        }                                                       \
-        __sys_res;                                              \
+	__syscall_return					\
 })
 
 #define K_LOAD_ARGS_0()
include/asm-ppc64/unistd.h +14 -5
Index: 2.6.6-rc3-mm2/include/asm-ppc64/unistd.h
===================================================================
@@ -286,6 +286,19 @@
 
 #ifndef __ASSEMBLY__
 
+#ifdef __KERNEL__
+#define __syscall_return						\
+	if (__sc_err & 0x10000000)					\
+		__sc_ret = - __sc_ret;
+#else
+#define __syscall_return						\
+	if (__sc_err & 0x10000000)					\
+	{								\
+		errno = __sc_ret;					\
+		__sc_ret = -1;						\
+	}
+#endif
+
 /* On powerpc a system call basically clobbers the same registers like a
  * function call, with the exception of LR (which is needed for the
  * "sc; bnslr" sequence) and CR (where only CR0.SO is clobbered to signal
@@ -317,11 +330,7 @@
 		__sc_ret = __sc_3;					\
 		__sc_err = __sc_0;					\
 	}								\
-	if (__sc_err & 0x10000000)					\
-	{								\
-		errno = __sc_ret;					\
-		__sc_ret = -1;						\
-	}								\
+	__syscall_return						\
 	return (type) __sc_ret
 
 #define __sc_loadargs_0(name, dummy...)					\
include/asm-ppc/unistd.h +14 -5
Index: 2.6.6-rc3-mm2/include/asm-ppc/unistd.h
===================================================================
@@ -277,6 +277,19 @@
 
 #define __NR(n)	#n
 
+#ifdef __KERNEL__
+#define __syscall_return						\
+	if (__sc_err & 0x10000000)					\
+		__sc_ret = - __sc_ret;
+#else
+#define __syscall_return						\
+	if (__sc_err & 0x10000000)					\
+	{								\
+		errno = __sc_ret;					\
+		__sc_ret = -1;						\
+	}
+#endif
+
 /* On powerpc a system call basically clobbers the same registers like a
  * function call, with the exception of LR (which is needed for the
  * "sc; bnslr" sequence) and CR (where only CR0.SO is clobbered to signal
@@ -307,11 +320,7 @@
 		__sc_ret = __sc_3;					\
 		__sc_err = __sc_0;					\
 	}								\
-	if (__sc_err & 0x10000000)					\
-	{								\
-		errno = __sc_ret;					\
-		__sc_ret = -1;						\
-	}								\
+	__syscall_return						\
 	return (type) __sc_ret
 
 #define __sc_loadargs_0(name, dummy...)					\
include/asm-s390/unistd.h +4 -0
Index: 2.6.6-rc3-mm2/include/asm-s390/unistd.h
===================================================================
@@ -360,6 +360,9 @@
 
 /* user-visible error numbers are in the range -1 - -122: see <asm-s390/errno.h> */
 
+#ifdef __KERNEL__
+#define __syscall_return(type, res) return ((type)(res))
+#else
 #define __syscall_return(type, res)			     \
 do {							     \
 	if ((unsigned long)(res) >= (unsigned long)(-125)) { \
@@ -368,6 +371,7 @@
 	}						     \
 	return (type) (res);				     \
 } while (0)
+#endif
 
 #define _svc_clobber "1", "cc", "memory"
 
include/asm-sh/unistd.h +4 -0
Index: 2.6.6-rc3-mm2/include/asm-sh/unistd.h
===================================================================
@@ -286,6 +286,9 @@
 
 /* user-visible error numbers are in the range -1 - -124: see <asm-sh/errno.h> */
 
+#ifdef __KERNEL__
+#define __syscall_return(type, res) return ((type)(res))
+#else
 #define __syscall_return(type, res) \
 do { \
 	if ((unsigned long)(res) >= (unsigned long)(-124)) { \
@@ -297,6 +300,7 @@
 	} \
 	return (type) (res); \
 } while (0)
+#endif
 
 /* XXX - _foo needs to be __foo, while __NR_bar could be _NR_bar. */
 #define _syscall0(type,name) \
include/asm-sparc64/unistd.h +16 -24
Index: 2.6.6-rc3-mm2/include/asm-sparc64/unistd.h
===================================================================
@@ -303,6 +303,16 @@
  *          find a free slot in the 0-282 range.
  */
 
+#ifdef __KERNEL__
+#define __syscall_return(type, res) return ((type)(res))
+#else
+#define __syscall_return(type, res)		\
+	if (res >= 0)				\
+		return (type)res;		\
+	errno = -res;				\
+	return -1;
+#endif
+
 #define _syscall0(type,name) \
 type name(void) \
 { \
@@ -314,10 +324,7 @@
 		      : "=r" (__res)\
 		      : "r" (__g1) \
 		      : "o0", "cc"); \
-if (__res >= 0) \
-    return (type) __res; \
-errno = -__res; \
-return -1; \
+	__syscall_return(type, __res); \
 }
 
 #define _syscall1(type,name,type1,arg1) \
@@ -332,10 +339,7 @@
 		      : "=r" (__res), "=&r" (__o0) \
 		      : "1" (__o0), "r" (__g1) \
 		      : "cc"); \
-if (__res >= 0) \
-	return (type) __res; \
-errno = -__res; \
-return -1; \
+	__syscall_return(type, __res); \
 }
 
 #define _syscall2(type,name,type1,arg1,type2,arg2) \
@@ -351,10 +355,7 @@
 		      : "=r" (__res), "=&r" (__o0) \
 		      : "1" (__o0), "r" (__o1), "r" (__g1) \
 		      : "cc"); \
-if (__res >= 0) \
-	return (type) __res; \
-errno = -__res; \
-return -1; \
+	__syscall_return(type, __res); \
 }
 
 #define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \
@@ -371,10 +372,7 @@
 		      : "=r" (__res), "=&r" (__o0) \
 		      : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__g1) \
 		      : "cc"); \
-if (__res>=0) \
-	return (type) __res; \
-errno = -__res; \
-return -1; \
+	__syscall_return(type, __res); \
 }
 
 #define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
@@ -392,10 +390,7 @@
 		      : "=r" (__res), "=&r" (__o0) \
 		      : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__o3), "r" (__g1) \
 		      : "cc"); \
-if (__res>=0) \
-	return (type) __res; \
-errno = -__res; \
-return -1; \
+	__syscall_return(type, __res); \
 } 
 
 #define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \
@@ -415,10 +410,7 @@
 		      : "=r" (__res), "=&r" (__o0) \
 		      : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__o3), "r" (__o4), "r" (__g1) \
 		      : "cc"); \
-if (__res>=0) \
-	return (type) __res; \
-errno = -__res; \
-return -1; \
+	__syscall_return(type, __res); \
 }
 #ifdef __KERNEL_SYSCALLS__
 
include/asm-sparc/unistd.h +16 -24
Index: 2.6.6-rc3-mm2/include/asm-sparc/unistd.h
===================================================================
@@ -302,6 +302,16 @@
  *          find a free slot in the 0-282 range.
  */
 
+#ifdef __KERNEL__
+#define __syscall_return(type, res) return ((type)(res))
+#else
+#define __syscall_return(type, res)		\
+	if (res < -255 || res >= 0)		\
+		return (type)res;		\
+	errno = -res;				\
+	return -1;
+#endif
+
 #define _syscall0(type,name) \
 type name(void) \
 { \
@@ -315,10 +325,7 @@
 		      : "=r" (__res)\
 		      : "r" (__g1) \
 		      : "o0", "cc"); \
-if (__res < -255 || __res >= 0) \
-    return (type) __res; \
-errno = -__res; \
-return -1; \
+	__syscall_return(type, __res); \
 }
 
 #define _syscall1(type,name,type1,arg1) \
@@ -335,10 +342,7 @@
 		      : "=r" (__res), "=&r" (__o0) \
 		      : "1" (__o0), "r" (__g1) \
 		      : "cc"); \
-if (__res < -255 || __res >= 0) \
-	return (type) __res; \
-errno = -__res; \
-return -1; \
+	__syscall_return(type, __res); \
 }
 
 #define _syscall2(type,name,type1,arg1,type2,arg2) \
@@ -356,10 +360,7 @@
 		      : "=r" (__res), "=&r" (__o0) \
 		      : "1" (__o0), "r" (__o1), "r" (__g1) \
 		      : "cc"); \
-if (__res < -255 || __res >= 0) \
-	return (type) __res; \
-errno = -__res; \
-return -1; \
+	__syscall_return(type, __res); \
 }
 
 #define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \
@@ -378,10 +379,7 @@
 		      : "=r" (__res), "=&r" (__o0) \
 		      : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__g1) \
 		      : "cc"); \
-if (__res < -255 || __res>=0) \
-	return (type) __res; \
-errno = -__res; \
-return -1; \
+	__syscall_return(type, __res); \
 }
 
 #define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \
@@ -401,10 +399,7 @@
 		      : "=r" (__res), "=&r" (__o0) \
 		      : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__o3), "r" (__g1) \
 		      : "cc"); \
-if (__res < -255 || __res>=0) \
-	return (type) __res; \
-errno = -__res; \
-return -1; \
+	__syscall_return(type, __res); \
 } 
 
 #define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \
@@ -426,10 +421,7 @@
 		      : "=r" (__res), "=&r" (__o0) \
 		      : "1" (__o0), "r" (__o1), "r" (__o2), "r" (__o3), "r" (__o4), "r" (__g1) \
 		      : "cc"); \
-if (__res < -255 || __res>=0) \
-	return (type) __res; \
-errno = -__res; \
-return -1; \
+	__syscall_return(type, __res); \
 }
 #ifdef __KERNEL_SYSCALLS__
 
include/asm-v850/unistd.h +4 -1
Index: 2.6.6-rc3-mm2/include/asm-v850/unistd.h
===================================================================
@@ -245,6 +245,9 @@
 #define __builtin_expect(x, expected_value) (x)
 #endif
 
+#ifdef __KERNEL__
+#define __syscall_return(type, res) return ((type)(res))
+#else
 #define __syscall_return(type, res)					      \
   do {									      \
 	  /* user-visible error numbers are in the range -1 - -124:	      \
@@ -255,7 +258,7 @@
 	  }								      \
 	  return (type) (res);						      \
   } while (0)
-
+#endif
 
 #define _syscall0(type, name)						      \
 type name (void)							      \
include/asm-x86_64/unistd.h +4 -0
Index: 2.6.6-rc3-mm2/include/asm-x86_64/unistd.h
===================================================================
@@ -560,6 +560,9 @@
 
 #define __syscall_clobber "r11","rcx","memory" 
 
+#ifdef __KERNEL__
+#define __syscall_return(type, res) return ((type)(res))
+#else
 #define __syscall_return(type, res) \
 do { \
 	if ((unsigned long)(res) >= (unsigned long)(-127)) { \
@@ -568,6 +571,7 @@
 	} \
 	return (type) (res); \
 } while (0)
+#endif
 
 #ifndef __KERNEL_SYSCALLS__
 

============================ snip ============================

Signature · 3 lines
                          I won't rest till it's the best ...
                          Programmer, Linux Scalability
                          Paul Jackson <[email protected]> 1.650.933.1373
#72 lore raw

2.6.6-rc3-mm2: vermagic compile error if CONFIG_MODULES=n

In reply to Andrew Morton
Quoted 8 lines · Andrew Morton

...
Changes since 2.6.6-rc3-mm2:
...
+proc-sys-kernel-vermagic.patch

Add /proc/sys/kernel/vermagic so that package installers can work out how the kernel was built (soliciting feedback on this one).
...

linux/vermagic.h now references a variable in kernel/module.c.

Since this file is only included for CONFIG_MODULES=y, CONFIG_MODULES=n results in the following compile error:

<-- snip -->

...
LD .tmp_vmlinux1
kernel/built-in.o(.data+0xc54): undefined reference to `vermagic'
make: *** [.tmp_vmlinux1] Error 1

<-- snip -->

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#73 lore raw
In reply to Andrew Morton
Quoted 8 lines · On Wed, 5 May 2004 01:31:35 -0700 Andrew Morton <[email protected]> wrote:

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.6-rc3/2.6.6-rc3-mm2/

- Lots of little fixes and updates. Nothing really major.

- The huge memory leak from 2.6.6-rc3-mm1 is fixed.

something has broken the b44 module,
modprobe b44 fails with:
FATAL: Error inserting b44 (/lib/modules/2.6.6-rc3-mm2/kernel/drivers/net/b44.ko): Unknown symbol in module, or unknown parameter (see dmesg)

dmesg contains the line:
b44: Unknown symbol generic_mii_ioctl

Antonio

#74 lore raw
Quoted 7 lines · Antonio Dolcetta

something has broken the b44 module,
modprobe b44 fails with:
FATAL: Error inserting b44 (/lib/modules/2.6.6-rc3-mm2/kernel/drivers/net/b44.ko): Unknown symbol in module, or unknown parameter (see dmesg)

dmesg contains the line:
b44: Unknown symbol generic_mii_ioctl

Please config that your .config does not set CONFIG_MII?

 25-akpm/drivers/net/Kconfig |    1 +
 1 files changed, 1 insertion(+)
drivers/net/Kconfig renamed from drivers/net/Kconfig~b44-needs-mii +1 -0
diff -puN drivers/net/Kconfig~b44-needs-mii drivers/net/Kconfig
@@ -1309,6 +1309,7 @@ config APRICOT
 config B44
 	tristate "Broadcom 4400 ethernet support (EXPERIMENTAL)"
 	depends on NET_PCI && PCI && EXPERIMENTAL
+	select MII
 	help
 	  If you have a network (Ethernet) controller of this type, say Y and
 	  read the Ethernet-HOWTO, available from

_

#75 lore raw
Quoted 12 lines · On Thu, 6 May 2004 08:12:58 -0700 Andrew Morton <[email protected]> wrote:
Quoted 7 lines · Antonio Dolcetta

something has broken the b44 module,
modprobe b44 fails with:
FATAL: Error inserting b44 (/lib/modules/2.6.6-rc3-mm2/kernel/drivers/net/b44.ko): Unknown symbol in module, or unknown parameter (see dmesg)

dmesg contains the line:
b44: Unknown symbol generic_mii_ioctl

Please config that your .config does not set CONFIG_MII?

I enabled the Media Independent Interface and it works perfectly Sorry for the noise

Antonio

#76 lore raw
Quoted 12 lines · Antonio Dolcetta
Quoted 9 lines · On Thu, 6 May 2004 08:12:58 -0700 Andrew Morton <[email protected]> wrote:
Quoted 7 lines · Antonio Dolcetta

something has broken the b44 module,
modprobe b44 fails with:
FATAL: Error inserting b44 (/lib/modules/2.6.6-rc3-mm2/kernel/drivers/net/b44.ko): Unknown symbol in module, or unknown parameter (see dmesg)

dmesg contains the line:
b44: Unknown symbol generic_mii_ioctl

Quoted 6 lines
Quoted 3 lines

Please config that your .config does not set CONFIG_MII?

I enabled the Media Independent Interface and it works perfectly Sorry for the noise

Why sorry?

You found a bug in the kernel, and Andrew has posted a patch to fix this bug in future kernel releases.

Quoted 1 line

Antonio

cu
Adrian

Signature · 4 lines
       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed
#77 lore raw
In reply to Andrew Morton
Quoted 2 lines · Andrew Morton

Move-saved_command_line-to-init-mainc.patch
Move saved_command_line to init/main.c

This patch appears to be breaking serial console for me. Reverting this patch with patch -R makes it work again. I can't tell from the contents of the patch why it causes problems, but it does. I'd be happy to provide any further details if required.

Signature · 2 lines
Bruce Guenter <[email protected]> http://em.ca/~bruceg/ http://untroubled.org/
OpenPGP key: 699980E8 / D0B7 C8DD 365D A395 29DA  2E2A E96F B2DC 6999 80E8
#78 lore raw
Quoted 9 lines · Bruce Guenter
Quoted 2 lines · Andrew Morton

Move-saved_command_line-to-init-mainc.patch
Move saved_command_line to init/main.c

This patch appears to be breaking serial console for me. Reverting this patch with patch -R makes it work again. I can't tell from the contents of the patch why it causes problems, but it does. I'd be happy to provide any further details if required.

Thanks for narrowing it down - I'd been meaning to look into the serial console problem.

Rusty, can you have a ponder please?

#79 lore raw
Quoted 11 lines · Andrew Morton
Quoted 9 lines · Bruce Guenter
Quoted 2 lines · Andrew Morton

Move-saved_command_line-to-init-mainc.patch
Move saved_command_line to init/main.c

This patch appears to be breaking serial console for me. Reverting this patch with patch -R makes it work again. I can't tell from the contents of the patch why it causes problems, but it does. I'd be happy to provide any further details if required.

Quoted 4 lines

Thanks for narrowing it down - I'd been meaning to look into the serial console problem.

Rusty, can you have a ponder please?

Works for me: I use serial console. Config please.

Rusty.

Signature · 1 line
Anyone who quotes me in their signature is an idiot -- Rusty Russell
#80 lore raw
Quoted 1 line · Rusty Russell

Works for me: I use serial console. Config please.

Gladly. I've attached the config for 2.6.6-rc3-mm1, as 2.6.6-rc3-mm2 didn't compile, and I haven't had the time to try it again. This is on x86_64 (Opteron) FWIW.

Signature · 2 lines
Bruce Guenter <[email protected]> http://em.ca/~bruceg/ http://untroubled.org/
OpenPGP key: 699980E8 / D0B7 C8DD 365D A395 29DA  2E2A E96F B2DC 6999 80E8

#
# Automatically generated make config: don't edit
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
CONFIG_GART_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y

#
# Power management options
#
# CONFIG_PM is not set

#
# ACPI (Advanced Configuration and Power Interface) Support #
# CONFIG_ACPI is not set
CONFIG_ACPI_BOOT=y

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_UID16=y

#
# Device Drivers
#

#
# Generic Driver Options
#

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_LBD=y

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_IDEDISK is not set CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_REPORT_LUNS is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_DM is not set

#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=40
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_TUNNEL=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_LOCAL=y
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_RAW=m

#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
CONFIG_IP6_NF_RAW=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_CSZ=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_DELAY=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_POLICE=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=m

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
# CONFIG_IPMI_SI is not set
CONFIG_IPMI_WATCHDOG=m

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL_MCH is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HANGCHECK_TIMER=m

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
CONFIG_I2C_AMD8111=m
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set

#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m

#
# Other I2C Chip support
#
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
# CONFIG_FB is not set
CONFIG_VIDEO_SELECT=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
# CONFIG_USB is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_SMBIOS is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m

#
# DOS/FAT/NT Filesystems
#
# CONFIG_FAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_SCHEDSTATS=y
# CONFIG_FRAME_POINTER is not set

#
# Security options
#
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set

#
# Library routines
#
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y

#81 lore raw
In reply to Rusty Russell
Quoted 11 lines · Rusty Russell
Quoted 10 lines · Andrew Morton
Quoted 8 lines · Bruce Guenter
Quoted 2 lines · Andrew Morton

Move-saved_command_line-to-init-mainc.patch
Move saved_command_line to init/main.c

This patch appears to be breaking serial console for me. Reverting this patch with patch -R makes it work again. I can't tell from the contents of the patch why it causes problems, but it does. I'd be happy to provide any further details if required.

Quoted 6 lines
Quoted 4 lines

Thanks for narrowing it down - I'd been meaning to look into the serial console problem.

Rusty, can you have a ponder please?

Works for me: I use serial console. Config please.

As you wish,

RJW

#
# Automatically generated make config: don't edit
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Processor type and features
#
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_PREEMPT is not set
CONFIG_K8_NUMA=y
CONFIG_DISCONTIGMEM=y
CONFIG_NUMA=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_NR_CPUS=2
CONFIG_GART_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y

#
# Power management options
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set

#
# ACPI (Advanced Configuration and Power Interface) Support #
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_SLEEP is not set
CONFIG_ACPI_AC=y
# CONFIG_ACPI_BATTERY is not set CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_UID16=y

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_OTHER=y
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_LBD=y

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_IDEDISK_STROKE=y
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_IVB=y
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_REPORT_LUNS is not set CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
CONFIG_SCSI_SATA_SIL=y
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_SATA_VITESSE is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_DEBUG=m

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=y
CONFIG_MD_RAID5=y
# CONFIG_MD_RAID6 is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_BLK_DEV_DM is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y

#
# Device Drivers
#

#
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
CONFIG_IP_NF_FTP=y
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_IP_NF_RAW is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=m

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
CONFIG_SCTP_DBG_MSG=y
CONFIG_SCTP_DBG_OBJCNT=y
CONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
CONFIG_AMD8111_ETH=m
# CONFIG_AMD8111E_NAPI is not set
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_B44=m
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_E100_NAPI is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set

#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
# CONFIG_E1000_NAPI is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=m

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_SHAPER=m
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
CONFIG_GAMEPORT=m
CONFIG_SOUND_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
# CONFIG_GAMEPORT_CS461x is not set
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=m

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
# CONFIG_IPMI_SI is not set
CONFIG_IPMI_WATCHDOG=m

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_NVRAM=m
CONFIG_RTC=y
CONFIG_DTLK=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL_MCH is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_SIS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HANGCHECK_TIMER=m

#
# I2C support
#
# CONFIG_I2C is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set

#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_BIT32_EMUL=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_MEMORY=y
CONFIG_SND_DEBUG_DETECT=y

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set

#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set

#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
CONFIG_SOUND_ICH=m
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_ALI5455 is not set
# CONFIG_SOUND_FORTE is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_AD1980 is not set

#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_UHCI_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_HPUSBSCSI=m

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set

#
# Video4Linux support is needed for USB Multimedia device support #

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETSERVO is not set
CONFIG_USB_TEST=m

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_SMBIOS is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_QUOTA=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp852"
CONFIG_CIFS=m
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-2"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y

#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m

#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SLAB is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_INIT_DEBUG is not set
# CONFIG_DEBUG_INFO is not set
CONFIG_SCHEDSTATS=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_KGDB is not set

#
# Security options
#
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_ROOTPLUG=m
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_MLS=y

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_CRC32C is not set
CONFIG_CRYPTO_TEST=m

#
# Library routines
#
CONFIG_CRC32=m
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y

#82 lore raw
Quoted 13 lines · R. J. Wysocki
Quoted 11 lines · Rusty Russell
Quoted 10 lines · Andrew Morton
Quoted 8 lines · Bruce Guenter
Quoted 2 lines · Andrew Morton

Move-saved_command_line-to-init-mainc.patch
Move saved_command_line to init/main.c

This patch appears to be breaking serial console for me. Reverting this patch with patch -R makes it work again. I can't tell from the contents of the patch why it causes problems, but it does. I'd be happy to provide any further details if required.

Quoted 8 lines
Quoted 6 lines
Quoted 4 lines

Thanks for narrowing it down - I'd been meaning to look into the serial console problem.

Rusty, can you have a ponder please?

Works for me: I use serial console. Config please.

As you wish,

Works for me too. Can you share your kernel boot commandline with us?

A message that is not in the archive (sent off-list or not yet received): [email protected]

#84 lore raw
Quoted 6 lines · R. J. Wysocki

Sute, it's like that:

kernel /boot/vmlinuz-2.6.6-rc3-mm2 root=/dev/sdb3 vga=792 hdc=ide-scsi console=ttyS0,115200 console=tty0

Please try `console=ttyS0'.

#85 lore raw
Quoted 7 lines · Andrew Morton
Quoted 4 lines · R. J. Wysocki

Sute, it's like that:

kernel /boot/vmlinuz-2.6.6-rc3-mm2 root=/dev/sdb3 vga=792 hdc=ide-scsi console=ttyS0,115200 console=tty0

Please try `console=ttyS0'.

I have. It does not help. :-(

Still, reversing the Move-saved_command_line-to-init-mainc.patch _does_ help, even with the above command line. I guess it's an x86_64-specific issue.

#86 lore raw
In reply to a message not in the archive
Quoted 6 lines · R. J. Wysocki

Sute, it's like that:

kernel /boot/vmlinuz-2.6.6-rc3-mm2 root=/dev/sdb3 vga=792 hdc=ide-scsi console=ttyS0,115200 console=tty0

hm, according to the logic in there you should have seen the console messages on tty0 because it was the last-specified. That's what happens here, whether or not Move-saved_command_line-to-init-mainc.patch is applied.

#87 lore raw
Quoted 10 lines · Andrew Morton
Quoted 4 lines · R. J. Wysocki

Sute, it's like that:

kernel /boot/vmlinuz-2.6.6-rc3-mm2 root=/dev/sdb3 vga=792 hdc=ide-scsi console=ttyS0,115200 console=tty0

hm, according to the logic in there you should have seen the console messages on tty0 because it was the last-specified. That's what happens here, whether or not Move-saved_command_line-to-init-mainc.patch is applied.

Well, I've been using this very command line for months, and it worked fine before 2.6.6-rc3-mm1. Anyway, according to Documentation/serial-console.txt:

"You can specify multiple console= options on the kernel command line. _Output_ _will_ _appear_ _on_ _all_ _of_ _them_ [emphasis mine]. The last device will be used when you open /dev/console. So, for example:

        console=ttyS1,9600 console=tty0

defines that opening /dev/console will get you the current foreground virtual console, and kernel messages will appear on both the VGA console and the 2nd serial port (ttyS1 or COM2) at 9600 baud."

And that's exactly what I need. So, the syntax etc. might have changed, but shouldn't it be documented accordingly, then?

#88 lore raw
In reply to Andrew Morton
Quoted 1 line · Andrew Morton

Works for me too. Can you share your kernel boot commandline with us?

Sure. I use (in grub):

	kernel /vmlinuz-2.6.6-rc2-mm2 vga=1 ro root=/dev/md15 elevator=deadline console=ttyS0,115200n8
Signature · 2 lines
Bruce Guenter <[email protected]> http://em.ca/~bruceg/ http://untroubled.org/
OpenPGP key: 699980E8 / D0B7 C8DD 365D A395 29DA  2E2A E96F B2DC 6999 80E8
#89 lore raw
Quoted 6 lines · Bruce Guenter
Quoted 1 line · Andrew Morton

Works for me too. Can you share your kernel boot commandline with us?

Sure. I use (in grub):

	kernel /vmlinuz-2.6.6-rc2-mm2 vga=1 ro root=/dev/md15 elevator=deadline console=ttyS0,115200n8

oh, and you're using x86_64 too.

#90 lore raw
In reply to Andrew Morton
Quoted 6 lines · Andrew Morton

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.6-rc3/2.6.6-rc3-mm2/

+fix-deadlock-in-journalled-quota-fix.patch

Fix fix-deadlock-in-journalled-quota.patch

This patch seems to be slightly mangled; patch complains if
fs/dquot.c.orig already exists, though it doesn't seem to create such a file in either case.

Review

Quoted 5 lines
(quoted diff) +2 -0
+remove-errno-refs.patch
+ia64-remove-errno-refs.patch
 
 Fiddle with kernel syscalls and remove the global `errno' variable.  I
 actually meant to drop this because we'll be doing it differently.

I had to back these two patches out to build for ppc:

LD .tmp_vmlinux1
arch/ppc/kernel/built-in.o(.text+0x32a2): In function `execve':
arch/ppc/kernel/entry.S: undefined reference to `errno' arch/ppc/kernel/built-in.o(.text+0x32a6):arch/ppc/kernel/entry.S:
undefined reference to `errno'
make: *** [.tmp_vmlinux1] Error 1

Probably just another reason to drop them. I think I'm about to
find out if I should have backed out the syscall patch too. :)

Signature · 5 lines
Joseph Fannin
[email protected]

"Bull in pure form is rare; there is usually some contamination by data."
    -- William G. Perry