Fix ppc64 out_be64
PATCH 1/1 Fix ppc64 out_be64
I notice that the latest BK has a fix for the bugs in ppc64's out_le64 that I just spent a few hours tracking down in 2.6.6, but out_be64 is still broken.
This patch fixes two problems with out_be64:
- The val parameter has to be unsigned long (not int), since it's 64 bits.
- Since we're passing *addr into the asm as an output parameter, we should just use %0 instead of 0(%0) -- what's written won't even compile.
My ppc64 asm skills are nearly nonexistent but I'm pretty sure this fix is needed and correct.
Thanks,
Roland
===== include/asm-ppc64/io.h 1.18 vs edited =====
include/asm-ppc64/io.h +2 -2
@@ -356,9 +356,9 @@ : "=&r" (tmp) , "=&r" (val) : "1" (val) , "b" (addr) , "m" (*addr)); } -static inline void out_be64 (volatile unsigned long *addr,int val) +static inline void out_be64 (volatile unsigned long *addr,unsigned long val) { - __asm__ __volatile__("std %1,0(%0); sync" :"=m" (*addr) :"r" (val)); + __asm__ __volatile__("std %1,%0; sync" :"=m" (*addr) :"r" (val)); }#ifndef CONFIG_PPC_ISERIES
Review
Quoted 7 lines
(quoted diff) +2
-2-static inline void out_be64(volatile unsigned long *addr, int val) +static inline void out_be64(volatile unsigned long *addr, unsigned long val) { - __asm__ __volatile__("std %1,0(%0); sync" : "=m" (*addr) : "r" (val)); + __asm__ __volatile__("std %1,%0; sync" : "=m" (*addr) : "r" (val)); }
Ugh ? The syntax of std is std rS, ds(rA), so your fix doesn't look good to me, and it definitely builds with the current syntax, though I agree the type is indeed wrong. I also spotted another bug where we forgot to change an eieio into sync in there though.
Does this totally untested patch works for you ?
===== include/asm-ppc64/io.h 1.18 vs edited =====
include/asm-ppc64/io.h +2 -2
@@ -307,7 +307,7 @@static inline void out_be32 (volatile unsigned *addr,int val) { - __asm__ __volatile__("stw%U0%X0 %1,%0; eieio" + __asm__ __volatile__("stw%U0%X0 %1,%0; sync" :"=m" (*addr) :"r" (val)); }
@@ -358,7 +358,7 @@static inline void out_be64 (volatile unsigned long *addr,int val) { - __asm__ __volatile__("std %1,0(%0); sync" :"=m" (*addr) :"r" (val)); + __asm__ __volatile__("std%U0%X0 %1,%0; sync" :"=m" (*addr) :"r" (val)); }#ifndef CONFIG_PPC_ISERIES
Hi,
Quoted 6 lines
Ugh ? The syntax of std is std rS, ds(rA), so your fix doesn't look good to me, and it definitely builds with the current syntax, though I agree the type is indeed wrong. I also spotted another bug where we forgot to change an eieio into sync in there though.
Does this totally untested patch works for you ?
It would be nice to make val unsigned long too :)
Anton
Quoted 9 lines
include/asm-ppc64/io.h +1
-1@@ -358,7 +358,7 @@static inline void out_be64 (volatile unsigned long *addr,int val) { - __asm__ __volatile__("std %1,0(%0); sync" :"=m" (*addr) :"r" (val)); + __asm__ __volatile__("std%U0%X0 %1,%0; sync" :"=m" (*addr) :"r" (val)); }#ifndef CONFIG_PPC_ISERIES
Quoted 10 lines · Anton Blanchard
Hi,
Quoted 6 lines
Ugh ? The syntax of std is std rS, ds(rA), so your fix doesn't look good to me, and it definitely builds with the current syntax, though I agree the type is indeed wrong. I also spotted another bug where we forgot to change an eieio into sync in there though.
Does this totally untested patch works for you ?
It would be nice to make val unsigned long too :)
Ooops... that what happens with patches written before breakfast ;)
Ben.
Benjamin> Ugh ? The syntax of std is std rS, ds(rA), so your fix Benjamin> doesn't look good to me, and it definitely builds with Benjamin> the current syntax, though I agree the type is indeed Benjamin> wrong. I also spotted another bug where we forgot to Benjamin> change an eieio into sync in there though.
Although the kernel builds, it's only because no one actually uses out_be64. You can try the old version and see:
Quoted 1 line
cat
foo.c
static inline void out_be64(volatile unsigned long *addr, unsigned
long val)
{
__asm__ __volatile__("std %1,0(%0); eieio" : "=m" (*addr) :
"r" (val));
}
void foo(void *x, unsigned long y)
{
out_be64(x, y);
}
$ ${CROSS_COMPILE}gcc -save-temps -c foo.c
foo.s: Assembler messages:
foo.s:49: Error: syntax error; found `(' but expected `)'
foo.s:49: Error: junk at end of line: `(9))'Looking at foo.s, it's pretty obvious that %0 is already in the ds(rA) form, and adding 0() around it breaks things. out_be64 expands to:
#APP
std 0,0(0(9)); eieio
#NO_APPIt's possible this is an artifact of my cross-toolchain (gcc 3.4.0/binutils 2.15 built with Dan Kegel's crosstool),
Benjamin> Does this totally untested patch works for you ?
Yes, that looks fine (after fixing val to be unsigned long in out_be64). You know infinitely more about ppc64 asm than I do so I'm sure your version is better.
Thanks,
Roland
Quoted 4 lines
Yes, that looks fine (after fixing val to be unsigned long in
out_be64). You know infinitely more about ppc64 asm than I do so I'm sure your version is better.
Well, I may know ppc asm, but gcc inline asm still drives me nuts :)
Here's a fixed version (Andrew, please apply)
----
Patch fixes out_be64 implementation on ppc64 along with a glich in out_be32 (inconsistent) use of barrier.
===== include/asm-ppc64/io.h 1.18 vs edited =====
include/asm-ppc64/io.h +3 -3
@@ -307,7 +307,7 @@static inline void out_be32 (volatile unsigned *addr,int val) { - __asm__ __volatile__("stw%U0%X0 %1,%0; eieio" + __asm__ __volatile__("stw%U0%X0 %1,%0; sync" :"=m" (*addr) :"r" (val)); }
@@ -356,9 +356,9 @@ : "=&r" (tmp) , "=&r" (val) : "1" (val) , "b" (addr) , "m" (*addr)); } -static inline void out_be64 (volatile unsigned long *addr,int val) +static inline void out_be64 (volatile unsigned long *addr,unsigned long val) { - __asm__ __volatile__("std %1,0(%0); sync" :"=m" (*addr) :"r" (val)); + __asm__ __volatile__("std%U0%X0 %1,%0; sync" :"=m" (*addr) :"r" (val)); }#ifndef CONFIG_PPC_ISERIES
Benjamin> Well, I may know ppc asm, but gcc inline asm still Benjamin> drives me nuts :)
Speaking of gcc asm, is there a reason why out_le64 (specifically the constraints) isn't written in this (simpler) way? It seems to me we can just let val be an input, as long as the "&" constraint for tmp makes sure it doesn't share the same register. This seems to generate the same code for me as the current kernel version, at least with gcc 3.4.0/binutils 2.15.
static inline void out_le64(volatile unsigned long *addr, unsigned long val)
{
unsigned long tmp;
__asm__ __volatile__(
"rldimi %0,%2,5*8,1*8\n"
"rldimi %0,%2,3*8,2*8\n"
"rldimi %0,%2,1*8,3*8\n"
"rldimi %0,%2,7*8,4*8\n"
"rldicl %2,%2,32,0\n"
"rlwimi %0,%2,8,8,31\n"
"rlwimi %0,%2,24,16,23\n"
"std %0,%1\n"
"sync"
: "=&r" (tmp), "=m" (*addr) : "r" (val));
}Quoted 9 lines · Roland Dreier
Benjamin> Well, I may know ppc asm, but gcc inline asm still Benjamin> drives me nuts :)
Speaking of gcc asm, is there a reason why
out_le64(specifically the constraints) isn't written in this (simpler) way? It seems to me we can just let val be an input, as long as the "&" constraint for tmp makes sure it doesn't share the same register. This seems to generate the same code for me as the current kernel version, at least with gcc 3.4.0/binutils 2.15.
Hrm... and addr too .. well, I'm just paranoid about those constraints, I never took the time to fully understand how gcc deals with them and got bitten by them often enough. I'd rather keep the version that just works at this point ;)
Ben.