Skip to contentSkip to conversation

NAT Box

DISCUSSION Simone Sestini 2 participants 2 messages Jun 16, 2004

lore
Share & tools
lore
#0 lore raw

Hi all..

I'm developing a nat box for some special Internet Value Added Services.
I have a lot of NAS boxes that receives calls and then the default router for all is the nat box. The box has 2 ethernet interfaces, one public for internet acces and one over my intranet lan. I have just done a lot of special configuration but right now i'm in front of a problem.. Normaly a /23 subnet is always natted with a public ip address.
Now.. i need to resolve a problem..

A special /23 need to browse only on some specific destination.. but if one client with the ip into the /23 try to browse out of the range of the ip permitted i need to redirect the request automatically to 1 or more specific ip address.

This is the example that is working correct without the automatically redirection.
The 10.30.14.0 /23 can browse some public ip addresses but if it try to go out of the range the REJECT rules block the packet and the final client will not browse..

/usr/local/sbin/iptables -t nat -A POSTROUTING -s 10.30.14.0/23 -o eth0 -j SNAT --to PUBLIC_IP_FOR_NAT

/usr/local/sbin/iptables -N PERSONAL_RULES
/usr/local/sbin/iptables -A PERSONAL_RULES -j ACCEPT -s 10.30.14.0/23 -d First_Public_IP /usr/local/sbin/iptables -A PERSONAL_RULES -j ACCEPT -s 10.30.14.0/23 -d Second_Public_IP /usr/local/sbin/iptables -A PERSONAL_RULES -j ACCEPT -s 10.30.14.0/23 -d Third_Public_IP /usr/local/sbin/iptables -A PERSONAL_RULES -j ACCEPT -s 10.30.14.0/23 -d Other_Public_IP /usr/local/sbin/iptables -A PERSONAL_RULES -j ACCEPT -s 10.30.14.0/23 -d Other_Public_IP /usr/local/sbin/iptables -A PERSONAL_RULES -j REJECT -s 10.30.14.0/23 -d 0/0

/usr/local/sbin/iptables -A FORWARD -s 10.30.14.0/23 -p tcp --dport 80 -j PERSONAL_RULES

Now i have to do something that permit me to add a new feature..
I have to remove the REJECT rules and have to find the way to redirect the request to a specific ip.. maybe with a DNAT ??

Any idea ? all is appreciated..

Best Regards.

#1 lore raw
Quoted 44 lines · Simone Sestini

Hi all..

I'm developing a nat box for some special Internet Value Added Services. I have a lot of NAS boxes that receives calls and then the default router for all is the nat box.
The box has 2 ethernet interfaces, one public for internet acces and one over my intranet lan.
I have just done a lot of special configuration but right now i'm in front of a problem..
Normaly a /23 subnet is always natted with a public ip address. Now.. i need to resolve a problem..

A special /23 need to browse only on some specific destination.. but if one client with the ip into the /23 try to
browse out of the range of the ip permitted i need to redirect the request automatically to 1 or more specific
ip address.

This is the example that is working correct without the automatically redirection.
The 10.30.14.0 /23 can browse some public ip addresses but if it try to go out of the range the REJECT rules
block the packet and the final client will not browse..

/usr/local/sbin/iptables -t nat -A POSTROUTING -s 10.30.14.0/23 -o eth0 -j SNAT --to PUBLIC_IP_FOR_NAT

/usr/local/sbin/iptables -N PERSONAL_RULES /usr/local/sbin/iptables -A PERSONAL_RULES -j ACCEPT -s 10.30.14.0/23 -d First_Public_IP
/usr/local/sbin/iptables -A PERSONAL_RULES -j ACCEPT -s 10.30.14.0/23 -d Second_Public_IP
/usr/local/sbin/iptables -A PERSONAL_RULES -j ACCEPT -s 10.30.14.0/23 -d Third_Public_IP
/usr/local/sbin/iptables -A PERSONAL_RULES -j ACCEPT -s 10.30.14.0/23 -d Other_Public_IP
/usr/local/sbin/iptables -A PERSONAL_RULES -j ACCEPT -s 10.30.14.0/23 -d Other_Public_IP
/usr/local/sbin/iptables -A PERSONAL_RULES -j REJECT -s 10.30.14.0/23 -d 0/0

/usr/local/sbin/iptables -A FORWARD -s 10.30.14.0/23 -p tcp --dport 80 -j PERSONAL_RULES

Quoted 7 lines

Now i have to do something that permit me to add a new feature.. I have to remove the REJECT rules and have to find the way to redirect the request to a specific ip.. maybe with a DNAT ??

Any idea ? all is appreciated..

Best Regards.

Let me see if I understand you correctly. If a station from 10.30.14.0/23 sends a TCP packet on port 80 to any of the allowed destinations listed in PERSONAL_RULES, it should be ACCEPTed. If it sends to anything else, it should be redirected to a single IP address.

I can think of two approaches off the top of my head:

1) Use DNAT as you suggest. You could do something like:

iptables -t nat -N RedirectChain
iptables -t nat -A PREROUTING -s 10.30.14.0/23 -p 6 --dport 80 -j RedirectChain
iptables -t nat RedirectChain -d FirstPublicIP -j ACCEPT (or RETURN) iptables -t nat RedirectChain -d SecondPublicIP -j ACCEPT . . . etc. iptables -t nat RedirectChain -j DNAT --to-destination $REDIR_IP iptables -A PERSONAL_RULES -s 10.30.14.0/23 -d $REDIR_IP -p 6 --dport 80 -j ACCEPT (before REJECT rule)

2) If it is all http traffic and you want to get a little fancy, use a transparent proxy like Squid and a redirector like SquidGuard - that will give you a lot of flexibility and control at the application layer.

Hope it helps - John

Signature · 9 lines
John A. Sullivan III
Chief Technology Officer
Nexus Management
+1 207-985-7880
[email protected]
---
If you are interested in helping to develop a GPL enterprise class
VPN/Firewall/Security device management console, please visit
http://iscs.sourceforge.net