ppc32: Support for new Apple laptop models
PATCH 1/1 ppc32: Support for new Apple laptop models
Hi !
This patch adds support for newer Apple laptop models. It adds the basic identification for the new motherboards and the cpufreq support for models using the new 7447A CPU from Motorola.
This is mostly the work of John Steele Scott <[email protected]> with some bits from Sebastian Henschel <[email protected]> and some rework by myself. Please apply,
arch/ppc/kernel/misc.S +18 -0
@@ -253,6 +253,24 @@ mtmsr r7 blr +_GLOBAL(low_choose_7447a_dfs) + /* Clear MSR:EE */ + mfmsr r7 + rlwinm r0,r7,0,17,15 + mtmsr r0 + + /* Calc new HID1 value */ + mfspr r4,SPRN_HID1 + insrwi r4,r3,1,9 /* insert parameter into bit 9 */ + sync + mtspr SPRN_HID1,r4 + sync + isync + + /* Return */ + mtmsr r7 + blr + #endif /* CONFIG_CPU_FREQ_PMAC && CONFIG_6xx */ /* void local_save_flags_ptr(unsigned long *flags) */
arch/ppc/platforms/pmac_cpufreq.c +193 -118
413 lines not on this page · raw message
arch/ppc/platforms/pmac_feature.c +32 -0
@@ -1282,6 +1282,25 @@ return 0; } +static long __pmac +intrepid_aack_delay_enable (struct device_node * node,long param,long value) +{ +unsigned long flags; + +if (uninorth_rev <0xd2 ) +return -ENODEV ; + +LOCK (flags); +if (param) +UN_BIS (UNI_N_AACK_DELAY ,UNI_N_AACK_DELAY_ENABLE ); +else +UN_BIC (UNI_N_AACK_DELAY ,UNI_N_AACK_DELAY_ENABLE ); +UNLOCK (flags); + +return 0 ; +} + +#endif /* CONFIG_POWER4 */ static long __pmac
@@ -1914,6 +1933,7 @@ { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, { PMAC_FTR_READ_GPIO, core99_read_gpio }, { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, + { PMAC_FTR_AACK_DELAY_ENABLE, intrepid_aack_delay_enable }, { 0, NULL } };
@@ -2116,6 +2136,14 @@PMAC_TYPE_UNKNOWN_INTREPID , intrepid_features,PMAC_MB_HAS_FW_POWER |PMAC_MB_MOBILE , }, + { "PowerBook5,4", "PowerBook G4 15\"", +PMAC_TYPE_UNKNOWN_INTREPID , intrepid_features, +PMAC_MB_HAS_FW_POWER |PMAC_MB_MOBILE , + }, + { "PowerBook5,5", "PowerBook G4 17\"", +PMAC_TYPE_UNKNOWN_INTREPID , intrepid_features, +PMAC_MB_HAS_FW_POWER |PMAC_MB_MOBILE , + }, { "PowerBook6,1", "PowerBook G4 12\"",PMAC_TYPE_UNKNOWN_INTREPID , intrepid_features, PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
@@ -2125,6 +2153,10 @@PMAC_MB_HAS_FW_POWER |PMAC_MB_MOBILE , }, { "PowerBook6,3", "iBook G4", +PMAC_TYPE_UNKNOWN_INTREPID , intrepid_features, +PMAC_MB_HAS_FW_POWER |PMAC_MB_MOBILE , + }, + { "PowerBook6,4", "PowerBook G4 12\"",PMAC_TYPE_UNKNOWN_INTREPID , intrepid_features, PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, },
include/asm-ppc/pmac_feature.h +6 -0
@@ -273,6 +273,12 @@*/ #define PMAC_FTR_ENABLE_MPIC PMAC_FTR_DEF(19) +/* PMAC_FTR_AACK_DELAY_ENABLE (NULL, int enable, 0) +* +* Enable/disable the AACK delay on the northbridge for systems using DFS +*/ +#define PMAC_FTR_AACK_DELAY_ENABLE PMAC_FTR_DEF(20) +/* Don't use those directly, they are for the sake of pmac_setup.c */ extern long pmac_do_feature_call (unsigned int selector, ...);
include/asm-ppc/reg.h +1 -0
@@ -174,6 +174,7 @@#define SPRN_HID1 0x3F1/* Hardware Implementation Register 1 */ #define HID1_EMCP (1<<31)/* 7450 Machine Check Pin Enable */ +#define HID1_DFS (1<<22)/* 7447A Dynamic Frequency Scaling */ #define HID1_PC0 (1<<16)/* 7450 PLL_CFG[0] */ #define HID1_PC1 (1<<15)/* 7450 PLL_CFG[1] */ #define HID1_PC2 (1<<14)/* 7450 PLL_CFG[2] */
include/asm-ppc/uninorth.h +6 -0
@@ -142,6 +142,12 @@*/ #define UNI_N_HWINIT_STATE_CPU1_FLAG 0x10000000 +/* This register controls AACK delay, which is set when 2004 iBook/PowerBook +* is in low speed mode. +*/ +#define UNI_N_AACK_DELAY 0x0100 +#define UNI_N_AACK_DELAY_ENABLE 0x00000001 +/* Uninorth 1.5 rev. has additional perf. monitor registers at 0xf00-0xf50 */
Quoted 3 lines · Benjamin Herrenschmidt
This patch adds support for newer Apple laptop models. It adds the basic identification for the new motherboards and the cpufreq support for models using the new 7447A CPU from Motorola.
And here's a patch to add sound support for some of the newer PowerBooks. It appears that this chip supports the AWACS sample rates, but has a snapper-style mixer. Tested and works on my PowerBook5,4.
Jesse
===== sound/ppc/pmac.c 1.23 vs edited =====
sound/ppc/pmac.c +7 -0
@@ -931,6 +931,13 @@ chip->freq_table = tumbler_freqs; chip->control_mask =MASK_IEPC |0x11 ;/* disable IEE */ } +if (device_is_compatible (sound,"AOAKeylargo" )) { +/* Seems to support the stock AWACS frequencies, but has +a snapper mixer */ + chip->model =PMAC_SNAPPER ; +// chip->can_byte_swap = 0; /* FIXME: check this */ + chip->control_mask =MASK_IEPC |0x11 ;/* disable IEE */ + } prop = (unsigned int *)get_property (sound,"device-id" ,0 );if (prop) chip->device_id = *prop;
Quoted 10 lines · Jesse Barnes
Quoted 3 lines · Benjamin Herrenschmidt
This patch adds support for newer Apple laptop models. It adds the basic identification for the new motherboards and the cpufreq support for models using the new 7447A CPU from Motorola.
And here's a patch to add sound support for some of the newer PowerBooks. It appears that this chip supports the AWACS sample rates, but has a snapper-style mixer. Tested and works on my PowerBook5,4.
Signed-off-by Jesse Barnes <[email protected]>
Can you check out in more details the OS X driver ? I think there need to be some i2s tweaking when changing the format and/or the frequency. Doing that right would allow to support 8 & 16 bits properly at least.
Also, don't leave the commented out line, especially with the c++ style comments. If the chip can byteswap, make sure you have proper code to do this, if not, leave can_byteswap to 0, or people will experience all sorts of funny troubles ;)
Ben.
Quoted 4 lines · Benjamin Herrenschmidt
Can you check out in more details the OS X driver ? I think there need to be some i2s tweaking when changing the format and/or the frequency. Doing that right would allow to support 8 & 16 bits properly at least.
Sure, do you have an URL for that stuff? I don't want to have to go through any red tape to get access to the Darwin sources...
Quoted 4 lines
Also, don't leave the commented out line, especially with the c++ style comments. If the chip can byteswap, make sure you have proper code to do this, if not, leave
can_byteswapto 0, or people will experience all sorts of funny troubles ;)
Sure.
Jesse
Quoted 8 lines · Jesse Barnes
Quoted 4 lines · Benjamin Herrenschmidt
Can you check out in more details the OS X driver ? I think there need to be some i2s tweaking when changing the format and/or the frequency. Doing that right would allow to support 8 & 16 bits properly at least.
Sure, do you have an URL for that stuff? I don't want to have to go through any red tape to get access to the Darwin sources...
An AppleID account is enough, or there's opendarwin CVS but that may not be completely up-to-date cs. apple latest versions.
Quoted 8 lines
Quoted 4 lines
Also, don't leave the commented out line, especially with the c++ style comments. If the chip can byteswap, make sure you have proper code to do this, if not, leave
can_byteswapto 0, or people will experience all sorts of funny troubles ;)Sure.
Jesse
Signature · 1 line
Benjamin Herrenschmidt <[email protected]>