rfcomm
A message that is not in the archive (sent off-list or not yet received): [email protected]
I have bluez with bluez-utils-2.7 on two RH 8.0 systems (lx1 and lx2).
When I start rctest -r on lx1 without starting rctest -s on lx2, lx2 hangs and I have to switch it off and on to restart. This happens EVERY TIME I try this.
This does not happen when I run l2test in any way. Does it prove that there is a problem with RFCOMM? I have not seen this problem in the mailing list. If I have missed it, please inform.
I have not tried the rfcomm transfer the other way because I share lx1 with others.
Thanks in anticipation,
Swarup
-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Marcel Holtmann
maintainerHi Swarup,
Quoted 1 line
I have bluez with bluez-utils-2.7 on two RH 8.0 systems (lx1 and lx2).
please upgrade to bluez-utils-2.8 first. What kernel do you use?
Quoted 3 lines
When I start rctest -r on lx1 without starting rctest -s on lx2, lx2 hangs and I have to switch it off and on to restart. This happens EVERY TIME I try this.
I don't get the point how lx2 can hang when you listen at lx1. Are these two different machines or two dongles connected to the same machine?
Quoted 3 lines
This does not happen when I run l2test in any way. Does it prove that there is a problem with RFCOMM? I have not seen this problem in the mailing list. If I have missed it, please inform.
Actually I don't know. Show us "hcidump -x" from both machines.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hello Marcel,
Our mails have crossed.
The machines are different and have two usb dongles from Bluegear twin pack from Amazing Tech.
I will get the hcidump data and get back.
Thx,
Swarup
Quoted 39 lines · Marcel Holtmann
Hi Swarup,
Quoted 3 lines
I have bluez with bluez-utils-2.7 on two RH 8.0 systems (lx1 and lx2).
please upgrade to bluez-utils-2.8 first. What kernel do you use?
Quoted 5 lines
When I start rctest -r on lx1 without starting rctest -s on lx2, lx2 hangs and I have to switch it off and on to restart. This happens EVERY TIME I try this.
I don't get the point how lx2 can hang when you listen at lx1. Are these two different machines or two dongles connected to the same machine?
Quoted 5 lines
This does not happen when I run l2test in any way. Does it prove that there is a problem with RFCOMM? I have not seen this problem in the mailing list. If I have missed it, please inform.
Actually I don't know. Show us "hcidump -x" from both machines.
Regards
Marcel
I have upgraded the bluez-modules. But the problem persists:
To recap,
***********************************************************
Problem:
lx1 runs rctest -s <bt_addr of lx2>
lx2 freezes
No problem with l2test.
***********************************************************
The current configuration of lx2 is :
usb dongles twin pack from amazing tech
==================================
Linux RH 8.0 running 2.6.0. kernel
# Bluetooth support
#CONFIG_BT=mCONFIG_BT_L2CAP=mCONFIG_BT_SCO=mCONFIG_BT_RFCOMM=mCONFIG_BT_RFCOMM_TTY=yCONFIG_BT_BNEP=mCONFIG_BT_BNEP_MC_FILTER=yCONFIG_BT_BNEP_PROTO_FILTER=y
#
# Bluetooth device drivers
#CONFIG_BT_HCIUSB=mCONFIG_BT_USB_SCO=y
# CONFIG_BT_USB_ZERO_PACKET is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIVHCI is not set
[root@ebnt9638 bluetooth]# lsmod
Module Size Used by hci_usb 17152 2 rfcomm 45720 0 l2cap 31232 5 rfcomm bluetooth 56420 7 hci_usb,rfcomm,l2cap uhci_hcd 36232 0 ehci_hcd 26880 0
I have the following as well:
bluez-libs-2.8
bluez-utils-2.8
=============================================
hcidump (as root) data:
root@ebnt9638 swarup]# hcidump
HCIDump - HCI packet analyzer ver 1.9
device: hci0 snap_len: 1028 filter: 0xffffffff
Quoted 1 line
HCI Event: Connect Request (
0x04) plen 10
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
Quoted 2 lines
HCI Event: Command Status (
0x0f) plen 4
HCI Event: Connect Complete (0x03) plen 11
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
Quoted 2 lines
HCI Event: Max Slots Change (
0x1b) plen 3
HCI Event: Command Complete (0x0e) plen 6
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
Quoted 2 lines
HCI Event: Command Status (
0x0f) plen 4
ACL data: handle0x0028flags0x02dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
Quoted 1 line
HCI Event: Connection Packet Type Changed (
0x1d) plen 5
< ACL data: handle 0x0028 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Quoted 1 line
ACL data: handle
0x0028flags0x02dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 1024
< ACL data: handle 0x0028 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
< ACL data: handle 0x0028 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x0000 clen 4 MTU 1024
Quoted 4 lines
HCI Event: Number of Completed Packets (
0x13) plen 5 HCI Event: Number of Completed Packets (0x13) plen 5 HCI Event: Number of Completed Packets (0x13) plen 5 ACL data: handle0x0028flags0x02dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x0000 result 0 clen 0
Quoted 1 line
ACL data: handle
0x0028flags0x02dlen 8
L2CAP(d): cid 0x40 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
=============================================
At this point the machine freezes !!
Swarup
Quoted 51 lines · Marcel Holtmann
Hi Swarup,
Quoted 3 lines
I have bluez with bluez-utils-2.7 on two RH 8.0 systems (lx1 and lx2).
please upgrade to bluez-utils-2.8 first. What kernel do you use?
Quoted 5 lines
When I start rctest -r on lx1 without starting rctest -s on lx2, lx2 hangs and I have to switch it off and on to restart. This happens EVERY TIME I try this.
I don't get the point how lx2 can hang when you listen at lx1. Are these two different machines or two dongles connected to the same machine?
Quoted 5 lines
This does not happen when I run l2test in any way. Does it prove that there is a problem with RFCOMM? I have not seen this problem in the mailing list. If I have missed it, please inform.
Actually I don't know. Show us "hcidump -x" from both machines.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Marcel Holtmann
maintainerHi Swarup,
Quoted 10 lines
I have upgraded the bluez-modules. But the problem persists:
To recap,
***********************************************************
Problem:
lx1 runs rctest -s <bt_addrof lx2>
lx2 freezesNo problem with l2test.
***********************************************************
Quoted 6 lines
The current configuration of lx2 is :
usb dongles twin pack from amazing tech
==================================
Linux RH 8.0 running 2.6.0. kernel
you should have said this earlier. The 2.6.0 has a module reference counting bug. Update to 2.6.8-rc2 and everything should work fine.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
A message that is not in the archive (sent off-list or not yet received): [email protected]
Marcel Holtmann
maintainerHi Swarup,
Quoted 4 lines
Upgrading to 2.6.8-rc2 helped. Now there is no freezing.
By the way, is this the referece counting bug you and Eugene Crosser discussed some time ago?
point me to the thread in the mailing list archive and I can tell you, but we had two bad reference counting problem and I can't remember if it this one was mentioned by Eugene Crosser or not.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users