Skip to contentSkip to conversation

braindead adapters (sco)

Bluez-users Brad Midgley 3 participants 5 messages Jul 29, 2004 – Jul 30, 2004 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

Hi

I've been trying to get snd-bt-sco to work. I'm told that one possible reason it's not working is if the bluetooth dongle is routing incoming SCO data to PCM rather than HCI. I'm using the internal bluetooth (usb) on a Toshiba Portege m200. How can I tell if it's doing sco properly?

jabbed:/home/bmidgley# hciconfig -a
hci0:   Type: USB
        BD Address: 00:03:7A:0B:44:B3 ACL MTU: 192:8  SCO MTU: 64:8
        UP RUNNING PSCAN ISCAN
        RX bytes:34506 acl:2267 sco:0 events:270 errors:0
        TX bytes:1518 acl:42 sco:0 commands:19 errors:0
        Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH HOLD SNIFF PARK
        Link mode: SLAVE ACCEPT
        Name: 'jabbed.uen.org-0'
        Class: 0x000100
        Service Classes: Unspecified
        Device Class: Computer, Uncategorized
        HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP
Subver: 0x20d
        Manufacturer: Cambridge Silicon Radio (10)

I also have unsuccessfully tried a belkin f8t003:

hci1: Type: USB

        BD Address: 00:0A:3A:50:65:42 ACL MTU: 192:8  SCO MTU: 64:8
        UP RUNNING PSCAN ISCAN
        RX bytes:107 acl:0 sco:0 events:14 errors:0
        TX bytes:300 acl:0 sco:0 commands:13 errors:0
        Features: 0xff 0xff 0x0b 0x00 0x00 0x00 0x00 0x00
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH HOLD SNIFF PARK
        Link mode: SLAVE ACCEPT
        Name: 'jabbed.uen.org-1'
        Class: 0x000100
        Service Classes: Unspecified
        Device Class: Computer, Uncategorized
        HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP 

Subver: 0x20d
Manufacturer: Cambridge Silicon Radio (10)

Signature · 12 lines
Brad


-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
maintainer
#1 lore raw

Hi Brad,

Quoted 4 lines

I've been trying to get snd-bt-sco to work. I'm told that one possible reason it's not working is if the bluetooth dongle is routing incoming SCO data to PCM rather than HCI. I'm using the internal bluetooth (usb) on a Toshiba Portege m200. How can I tell if it's doing sco properly?

check with "hciconfig hci0 revision" as root.

Regards

Marcel

-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

#2 lore raw

Marcel

thanks for the quick reply. well, it looks like I'm good.

# hciconfig hci0 revision
hci0:   Type: USB
        BD Address: 00:03:7A:0B:44:B3 ACL MTU: 192:8  SCO MTU: 64:8
        HCI 16.4
        Chip version: BlueCore02
        Max key size: 56 bit
        SCO mapping:  HCI

next I will try the rework of the snd-bt-sco patch by Niko Berger. It's good to see it's possibly working for someone...

Brad

Quoted 24 lines

Hi Brad,

Quoted 1 line

I've been trying to get snd-bt-sco to work. I'm told that one possible reason it's not working is if the bluetooth dongle is routing incoming SCO data to PCM rather than HCI. I'm using the internal bluetooth (usb) on a Toshiba Portege m200. How can I tell if it's doing sco properly?

check with "hciconfig hci0 revision" as root.

Regards

Marcel

-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click
_______________________________________________
Bluez-users mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Signature · 12 lines
Brad


-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
#3 lore raw

[Bluez-users] Multihop question

In reply to Marcel Holtmann

I need to implement multihop using bluetooth devices.
The topology is as follows:
[Ethernet]---A---B---C
BT device C can visit Ethernet through B and A.
I want to know if I can implement multihop using BlueZ and what I shall do. Thanks.

-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

maintainer
#4 lore raw

Re: [Bluez-users] Multihop question

Hi,

Quoted 5 lines

I need to implement multihop using bluetooth devices.
The topology is as follows:
[Ethernet]---A---B---C
BT device C can visit Ethernet through B and A.
I want to know if I can implement multihop using BlueZ and what I shall do.

if you use BNEP as the underlaying protocol, you can use IP on top of it and this is all about IP routing.

Regards

Marcel

-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users